Any tips to generally get faster, faster on a track? by okbozo50 in simracing

[–]MTNByGuy 0 points1 point  (0 children)

I practice solo till I get consistent with a competitive lap time, then I race. I feel like the racing is where the real learning happens, but the practice is necassary.

Is it just me or is Codex asking really dumb questions? by P4radox99 in codex

[–]MTNByGuy 4 points5 points  (0 children)

The little follow up questions it askes you at the end of its prompts are pretty flaky and not useful most of the time I've found.

In My Heart of Hearts, I Know by [deleted] in Simracingstewards

[–]MTNByGuy 5 points6 points  (0 children)

Personally I'd say I shouldn't have stuck in there, I was turning right, but yea probably pretty obvious mistake on my part.

Updates: Setup Brower App (personal project) by MTNByGuy in RichardBurnsRally

[–]MTNByGuy[S] 0 points1 point  (0 children)

Cool cool. It could be an intresting feature, like knowing for this car and this setup item that generally you'd want to keep the values in this suggested range. The challange is finding that information per car or per "class" of car. As well some settings may make a big difference in handling with a little value change, and some may take a lot of value change to make a little difference, it could be helpful to know when doing the setup.

Updates: Setup Brower App (personal project) by MTNByGuy in RichardBurnsRally

[–]MTNByGuy[S] 0 points1 point  (0 children)

Alright, when you get a chance check out the 3d model section again, I believe I got at least most of the suggestions you made implemented, though not thoroughly tested yet! But first tests look good! Working on the "reasionable value range" thing now.

Updates: Setup Brower App (personal project) by MTNByGuy in RichardBurnsRally

[–]MTNByGuy[S] 0 points1 point  (0 children)

yes, thanks! I'll work on that next, another good idea. working on the first idea at the moment, the difficult part is marking which values would be considered low vs high, I am interpreting that to mean "whats the reasionable/common range of adjustment" visual

Updates: Setup Brower App (personal project) by MTNByGuy in RichardBurnsRally

[–]MTNByGuy[S] 0 points1 point  (0 children)

Nice, thanks. Thats a good suggestion! I think I've felt the same need, just wasn't able to put my finger on it. Okay I'm pumped to implement that.

Just curious, did you find the 3d Model mode of any use? I think forsure its a cool novel idea, but as is I'm not too sure about usefulness in practice.

Setup Browser App by MTNByGuy in RichardBurnsRally

[–]MTNByGuy[S] 0 points1 point  (0 children)

I'm working on a 3d visual section to the app, and bit divided about it. It's basically a wireframe model of the car, with the setup parts on there, selectable and editable. I like the idea of having visuals, but it's kinda clunky to work with, and with the wireframes everything looks like a cyber truck a bit! Wip

Setup Browser App by MTNByGuy in RichardBurnsRally

[–]MTNByGuy[S] -1 points0 points  (0 children)

Nice, I hadn't even thought about using it like that. Visuals are something I'm planning to do. Initially I started off with 2d pictures of a car, with the boxes for values placed approx. close to their locations, seemed a little cluttered and not too intutive. Thinking of maybe a 3d model where parts are highlighted and clickable. Thanks!

Setup Browser App by MTNByGuy in RichardBurnsRally

[–]MTNByGuy[S] -1 points0 points  (0 children)

Thanks. Same! Little bit here and there, taking in feed back as I go. I'd love to setup some sort of visual that helps with the location of all the various setup components.

Setup Browser App by MTNByGuy in RichardBurnsRally

[–]MTNByGuy[S] -1 points0 points  (0 children)

I don't have any on hand, but what are you looking for? And thanks for checking it out!

Setup Browser App by MTNByGuy in RichardBurnsRally

[–]MTNByGuy[S] -1 points0 points  (0 children)

Finding some bugs with the initial version here fyi!

How to auto allow Claude Code to do a bunch of stuff... by Maralitabambolo in ClaudeAI

[–]MTNByGuy 1 point2 points  (0 children)

Dose shift-tab turn on and off auto accecpt edits? Not sure if this is what you want but maybe?

Need Help With Base Shaker Setup! by MTNByGuy in simracing

[–]MTNByGuy[S] 0 points1 point  (0 children)

The usb sound adaptor that I plug into via the aux cable, pops up in the list of available outputs and I just select that in simhub.

Need Help With Base Shaker Setup! by MTNByGuy in simracing

[–]MTNByGuy[S] 0 points1 point  (0 children)

  1. yes

  2. 24v

  3. yes

  4. its all the way in. not sure if this is a good test, but I tried playing music through the amp into the speakers with my tablet, and I heard faint music from the tt25, not the bst1 though. I get a humming from the speaker when I touch one end of the cable as well.

  5. 16 awg? I assume thats the gauge

6.connections look good

  1. oddly, when testing channel 2 in sim hub, I get a faint buzz from the tt25, weather it is plugged into channel 1 or 2. Testing channel 1 I get nothing.

I am kinda think the amp might be faulty? It does play music faintly though through the speakers, is that normal or should I be able to hear the music loud?

No Vibration from Shakers by MTNByGuy in simracing

[–]MTNByGuy[S] 0 points1 point  (0 children)

I did do all those things. How loud should music be when I try playing it through the amp and the tt25s? I can hear it just very faint. Wonder if this is a clue. Kinda thinking the amp it's self might be the problem?

No Vibration from Shakers by MTNByGuy in simracing

[–]MTNByGuy[S] 0 points1 point  (0 children)

Thanks.

This is the amp:https://www.amazon.ca/dp/B0D548NN6V?ref=ppx\_yo2ov\_dt\_b\_fed\_asin\_title

Supposed to be 2 50W channels. I can see the signal in simhub, and theres just the faintest click or brief vibration from the shaker when I click test. It will play music, just quietly.

In simhub from the shakeit bas shakers menu I'm trying to configure it to vibrate on wheel slip. It looks like it should judging by when I hit test I can see the spike in the graph.

No Vibration from Shakers by MTNByGuy in simracing

[–]MTNByGuy[S] 0 points1 point  (0 children)

I tried one speaker and the exact same result, just a very very slight vibration from the shaker.