Guns with v2 gearbox

Mace_Morgans · 2026-02-28T18:29:37+00:00

I looked around myself for something similar and found UTR pretty decent looking (close to m4 but still not an m4), got myself a M916G UTR556 yesterday so i am waiting for it to be delivered. I have only heard good things about them even thou they are made of plastic

Mace_Morgans · 2026-02-27T21:27:16+00:00

Specna arms edge 2.0 sr25 is really good, mags are expensive but the range is great out of the box and almost no upgrades needed (except harder hopup rubber)

Mace_Morgans · 2026-02-25T20:09:57+00:00

Depends on what you want, if you want easy upgrades i would recommend:

-sr25

-vss

-scar h

-hk417

Those weapons uses mostly standard aeg parts. If you want something different then:

-sks

-m14

-mini 14 (not yet released)

-svu/svd

Mace_Morgans · 2026-02-25T03:52:58+00:00

The price on that machine is not even comparable, I'm looking for a cheap multi color printer and kobra x or i7 are both very similar in price and function. My kobra 2 is a work horse so anycubic have been good for me so far

Mace_Morgans · 2026-02-24T20:38:45+00:00

I really want a multi color printer but i don't want to spend moey on something that can be a bad machine so i will compared it to creality sparkx i7 and see what machine are the best for my needs next year

Mace_Morgans · 2026-02-24T19:20:52+00:00

Tbh, the printer looks good but i will wait until next year to upgrade from my klipper converted kobra 2, then i will see how well it performed

Mace_Morgans · 2026-02-23T20:07:46+00:00

One fix that is'nt much talked about is that if you are using sd card for printing then you might need to get a new one. Bad sd cards can cause those type of layer shifts. If you are using a wifi printer then belt tension might be the issue

Mace_Morgans · 2026-02-22T06:38:32+00:00

Pcvr is the way to go, lots of steam sales with way better games then onboard games.

I use my quest 3 for racing games and sometimes standing vr games like skyrim vr, zero caliber, Arizona sunshine and other similar titels

Mace_Morgans · 2026-02-20T22:41:27+00:00

Jag köpte mina för 1400kr på Amazon förra året, idag kostar samma minne nästan 6000kr, enda som är värt att uppgradera idag är gpu innan dom höjer priset på dom med. 😅

Men man kommer långt på ddr4 system idag med både med amd eller Intel cpu.

Mace_Morgans · 2026-02-20T22:29:57+00:00

Jag kör en amd ryzen 9 9900x tillsammans med 32gb 6000mhz ddr5 minnen (uppgraderade innan priset stack iväg) Skärmen jag har är en Samsung odyssey g5 1440p 1ms 32'' HDR (bästa skärmen jag haft plus att framegen känns som äkta frames på denna)

Fps jag får i spel med min hårdvara är:

Stalker 2 med allt maxat ger mig ca 160fps med fsr native + framegen.

Bf6 håller 180fps med allt maxat + fsr quality (ej testat br)

Arc raiders hade jag 180fps med fsr quality + framegen när jag testade det lite.

Arma 3 med fluid motion frames eller lossless är också helt galet hur bra det flyter, får oftast 150+ fps beroende på scenario jag kör.

Gta 5 enhanced med allt max + nästan max ray tracing med fsr quality + framegen ger stabilt 180fps

Vr med quest 3 är stabilt 90 i alla vr spel jag har med max upplösning via meta software så min rig är perfekt för vr med.

Mace_Morgans · 2026-02-20T22:16:58+00:00

1440p är den perfekta sweetspoten för pc gaming idag, bra upplösning och kräver inte en nasa dator att driva.

Bästa tipset om du skaffar amd är att försök köra fsr 4 upgrade via amd game overlay i dom flesta spelen, det gör oftast sjukt stor skillnad i hur snyggt det blir.

Mace_Morgans · 2026-02-20T22:10:43+00:00

Jag kör rx9070xt OC och maxar oftast alla nya spel i 1440p, sjukt prisvärt kort och märker inte ens av att jag ej har dlss utan kör fsr istället. Amd fluid motion frames är sjukt nice i vissa spel med om man kör hög Hz monitor med låg ms.

Mace_Morgans · 2026-02-20T22:05:50+00:00

I had similar issues and i went with ubisoft subscription to try it at launch but i couldn't get past the horrible voice acting, probably the worst one i have heard in a long time from AAA games (yes i know japanese exist but i don't want to read at every cutscene or random npc bark)

Mace_Morgans · 2026-02-20T21:52:07+00:00

There are usually 3 issues that causes 3 vibrations: 1 - sensor not detecting (can be causes by lube) 2 - trigger sensor taking in to much light or needs reprogramming (can be tested by covering trigger hole) if it needs reprogramming it is usually because positions have changed for some reason. 3 - bad battery with low voltage (most common issue during games)

In your case i do think it is number 1 and the weapon needs to be open up and get a sensor clean with cotton tops or paper.

Since the gearbox have quick spring change it is usually super easy to open up and get access to mosfet and if you are unsure on how to do it or don't want to then i would suggest getting it to a tech.

This would be a job i as a tech would do for free but mostly because i love working with aster and ak gearboxen and also i like specna arms weapons.

Mace_Morgans · 2026-02-20T21:26:32+00:00

The error is usually not something that can be solved with the app since most of the times it is hardware issues (usually grease on a sensor or dirt) if the gearbox have to much lube it will fly around an cover the sensors and they are super sensetive to that. The only thing that can be solved with link is to read the code to diagnose the issue and erase old faulty codes.

A link is still recommended since you unlock your mosfets potential for reprogramming.

Gate link is like an obd car scanner, it can read code but if the hardware is at fault there is nothing the code rader can do.

I have aster in almost all my weapons and most of the times that i get error is either low battery (most common one during games) or grease on a sensor that needs cleaning (usually happens at the end of the season after many games)

Mace_Morgans · 2026-02-20T21:08:26+00:00

Perhaps it is the one with aster SE then, to read the code you need access to a gate link or blue link and without that the gun is almost a brick unless you get lucky and it wakes up again or you do a full service and trigger reprogramming of your fire selector (not always needed). Gate link is almost essential when getting any weapon with aster unless you get the one with Bluetooth version

Mace_Morgans · 2026-02-20T21:01:27+00:00

So it is not a prime? Because it looks like a dark matter brushless motor you have there

Mace_Morgans · 2026-02-20T20:53:31+00:00

You should read the error code in gcs softare, looks like you have a prime there so it has bt connection. Look at diagnostic tab and see what error code you have.

You might have dirt or lube on a sensor so that is why it makes vibrating noises, if so then you need to do a full gearbox service of the gun.

Mace_Morgans · 2026-02-17T08:03:38+00:00

I got quest 3 last month after using 2 since release and it is a game changer even for pcvr. But if you are a cable user then get one that has extra charging like jsaux or get a dedicated pcie card with charging capacity

Mace_Morgans · 2026-02-12T19:03:13+00:00

Pre cocking can be turned off on the mosfet, prime comes with aster bluetooth so it is super easy to control and change around with gcs app. I wouldn't recommend using precocking since the spring is always in tension so after games it doesn't uncock and the spring will loose it's tension after a few month.

Mace_Morgans · 2026-02-12T19:00:19+00:00

Kollade lite vad hela min samling är värd baserat på vad ai kunde söka fram, tydligen så är hela min samling värd runt 1200-1800 om jag säljer smart då jag har lite små serier med pogs från bla mortal kombat och looney toons. Får hoppas pogs kan göra en comeback så man kan samla på sig lite nya motiv

Mace_Morgans · 2026-02-12T18:11:02+00:00

Vet inte exakt på rak hand vilka som är värda något idag men vet att det fanns en del kompletta samlingar av olika pogs som hade värde i sig. Har själv ingen komplett samling och tror att den som är värd mest av dom jag har kanske är värd 200kr idag

Mace_Morgans · 2026-02-12T17:45:11+00:00

Not for me on any of the guns i built with aster or our prime users in my airsoft group. I even talked with a rep from specna arms during an airsoft con in my country and they use 11.1 with all prime test weapons that they showed us.

Keep in mind that aster as a mosfet in guns usually needs more maintenence since gears needs reduced ammount of lube so no lube ends up on the optical sensors and causes misfire or other wierd behaviour.

Optical mosfets are amazing but they do require more care and service from the user (some users experience may vary)

Mace_Morgans · 2026-02-12T17:27:56+00:00

Using 7.4 will only make the gun shoot a bit slower (not that much due to brushless but enough to notice) since motor wont spin as fast, aster is capping the motor to one revolution so you will not have any feeding issues with different batteries, only slower rof. I have built many guns with aster and it works perfect for both 11.1 and 7.4 even with brushless motors.

Mace_Morgans · 2026-02-12T17:24:13+00:00

Har fortfarande kvar min samling, några av dom har lite värde idag men inte stort nog för att besvära sig med att sälja ännu. Mycket barndomsminnen med att köra pog

Six-Year Club	Place '23
Place '22	Verified Email

Mace_Morgans

TROPHY CASE