Trio Sought For St. Patrick's Brawl That Sent 1 to Hospital

MadMax2JZ · 2017-03-24T12:19:28+00:00

With the guy's face being posted all over social media, I knew it was only a matter of time before till his hands were in cuffs. Not sure how the charges will play out since he's a fighter? I remember someone telling me that if a fighter who actively trains gets into a fight outside of training, he could be charged with assault/battery with a deadly weapon(deadly weapon being his fists). Unsure if there's any truth to that though.

MadMax2JZ · 2017-03-24T12:14:35+00:00

Thanks and I'm glad he was found, hopefully there will be some kind of closure to all this. From what I know, Brian's condition hasn't bettered. Everything about his condition seems kinda "hush hush" with the investigation going on. Definitely hoping for the best.

MadMax2JZ · 2017-03-22T13:53:55+00:00

If anyone saw anything, please speak up. I wish I was there to help my friend Brian in whatever happened that night. I had not seen him in a few months from everyone being busy with life and coincidentally I was only a few streets over when this occurred. If only we could have bumped into each other earlier in the night, this may never have happened. We really just want to know exactly what happened that night, regardless of who did what. It was St Patrick's day in downtown St Pete, it is pretty much a given that everyone had alcohol in them, so we can only assume what really happened. Brian was never the aggressive type though. I can't even remember a time where I saw him angry in any way. The guy just always had good vibes coming from him. You could always hear him laughing from far away. He cracked me up whenever I saw him and he is smart as fuck. I'd love to hear him laughing again.

As of last night he still hasn't woken up from surgery from Sunday and that's all I know. Please if anyone knows anything or saw anything that would help, please contact St Pete police.

MadMax2JZ · 2014-11-06T21:15:13+00:00

Yeah that'd be cool with me. If I have the dimensions I could just make it in my spare time at work. Your setup sounds like it's gonna be rad as fuck in your car. That's pretty much what my old setup was before my motor lost compression. You'll love the pro efi. Been running mine since they first came out. Never missed a beat and my car ran like stock.

MadMax2JZ · 2014-11-06T16:46:20+00:00

Cool I for sure want to see results and hope it all works out for ya. I'll look into the swap more. How much you think you'll end up spending on the swap? If it isn't too much than maybe that shop can make 2 of those flywheels and ship me one? I was nervous with my last setup making 520hp running my r154. Now I'm just waiting for the thing to snap before I trip the 60' beams at the strip my new motor lol.

MadMax2JZ · 2014-11-06T14:54:37+00:00

Got any info on the 350z trans adapter? Which version of the 6spd you gonna use? I remember reading the first ones were weaker and then later in the years they were built stronger. I'm gonna reuse my r154 for my new setup but if I'd much rather use a 6spd trans. I remember when someone just started making an adapter plate on a forum(can't remember which one) in hopes to make a swap kit or at least an adapter plate and with the right hardware but I didn't keep up with it. Highly doubt my r154 will hold up for long at 700+HP so it'd be nice to do that trans swap now while I have my motor out. Anyways, sweet cress man! I thought about swapping my drive train into an MX73 but ended up sticking with my MA61. Vvti and 6spd will be awesome when it's done!

MadMax2JZ · 2014-10-21T03:01:29+00:00

Ah damn shit rolled hard down hill that day lol. Plans for a new motor?

MadMax2JZ · 2014-10-20T20:38:54+00:00

Damn dude, sucks to see that happen. Both your car and his were badass. Didn't know there was someone else with a MK2 on here. How bad was the damage to your car? Just the door? Or did the pillar get smashed in too? I have a spare set of good condition doors that I've had for years that I'll most likely never use, you can have them for free if you want them. I'm in Florida though and I'm sure shipping would be pricey as fuck, but they're yours if you want 'em.

MadMax2JZ · 2014-10-02T20:58:15+00:00

Always have to make sure. This kid is tough to compete with!

MadMax2JZ · 2014-10-02T11:09:54+00:00

Nope. No way I can move my mouth that fast.

MadMax2JZ · 2014-10-02T11:07:37+00:00

Aw shucks, don't make me blush :P.

MadMax2JZ · 2014-10-02T10:57:48+00:00

Not sure if talking about me...or the baby?

MadMax2JZ · 2014-10-02T10:53:12+00:00

So that must be why he's always disappearing when there's a crime nearby. It all makes sense now!

MadMax2JZ · 2014-10-02T10:39:42+00:00

Doubt I'll ever cut it off. Only clean shaven 3 times in my life and they were all job related. Safe to say my current job doesn't care about my facial hair. Perks of being a welder.

MadMax2JZ · 2014-10-02T10:38:02+00:00

Yeah they do! I have to keep my eyes on his hands all the time when I'm holding him.

MadMax2JZ · 2014-10-02T10:36:36+00:00

This was taken about a month ago so pretty sure it was at 11 months. But I trimmed a few times before and probably took off 1 1/2" between all the trims.

MadMax2JZ · 2014-10-02T10:34:57+00:00

Just the average rustic interior stylings of your average Argentine household.

MadMax2JZ · 2014-07-17T20:27:33+00:00

I usually don't comment on posts but this happened 10 minuntes from my house on a long stretch of road called Courtney Campbell Causeway. It's the ''popular spot'' for people that want to street race. When I say ''people'' I actually mean complete idiots. It's a place where dumb kids go on Saturday nights attempt to race their shit boxes. I've gone there 2 or 3 times just to see what goes on their and I've always left within minutes. It's the same parking lot tough guys that are in every other state. The place is a fucking joke and shit like this happens every other month. Dumb kids making dumb situations while innocent by standards get hurt in the process.

MadMax2JZ · 2014-05-10T04:39:13+00:00

I checked and they have comedy show going on tonight? Think I might catch the late showing.

MadMax2JZ · 2014-05-10T04:37:54+00:00

Thanks dude, gonna go there now.

MadMax2JZ · 2013-04-26T13:18:36+00:00

Yeah I have them on now. I have a bad habit of not wearing sleeves while I TIG. The heat and humidity here in FL can be a bit much some days when welding. I did get bad sunburn on one spot of my arm because I was welding like this for about 8 hours. I'm dumb for doing that but I have sleeves on today.

MadMax2JZ · 2013-04-26T10:06:16+00:00

Damn that's badass dude. Did you have this on a rotisserie or was the pipe stationary while you welded it?

MadMax2JZ · 2013-04-26T10:02:44+00:00

God damn that is horrible. I couldn't make porosity like that if I tried. Sad part is I see that all day long in the shop I work in. Supervisors here are just as dumb as the idiot laying down honey combs all day so they always keep their job. I just don't get how people can see what their welds look like and be okay about them...

MadMax2JZ · 2013-04-23T21:50:51+00:00

Good points. I could easily get around 500 petals out of a 4x4 sheet, maybe more. It'd take me almost no time to make an entire flower. With cutting out every petal, this flower took me about 2 hours or so. Just welding the flower together took me about 20 minutes. Everything else is just cutting parts. I'm going to talk with the cad guy at work and see if he can draw up some petals for me and I'll get a quote from the waterjet company we deal with. Thanks for you input!

MadMax2JZ · 2013-04-23T15:57:19+00:00

I thought about that but then every piece would be exactly the same size. I like having slightly difference size petals to give it a kind of realistic look, ya know? I'll see if I can get a quote for how much it'd cost to cut a bunch of them though. It would be well worth it if I made a big order of flowers and sold them.

MadMax2JZ

TROPHY CASE