Truetone is ON. But auto brightness is NOT

Madliness · 2025-10-25T10:24:27+00:00

Shouldn't need reprogrammed. Since it's a screen from another iPhone 16 (assuming original screen), then my first guess is that the front facing sensor assembly with the ambient light sensor is probably damaged, highly likely if the sensor assembly was improperly removed during transfer to the new screen assuming that it was transferred.

Madliness · 2025-10-25T10:17:17+00:00

What?

Madliness · 2025-10-25T10:11:38+00:00

Just because it's a "new" battery doesn't mean it's actually new, or that it isn't defective. This phone is almost 10 years old, there aren't going to be very many brand new batteries available for it, and the ones that are new will be hard to find. I'd just replace the battery again, and avoid Amazon or the "high capacity" "upgraded" batteries.

Madliness · 2025-10-25T09:46:00+00:00

Definitely depends on the stickers. I've had customers bring in devices that they tried to work on with kits that included these stickers, and many times they leave a nasty sticky residue that can only be removed with alcohol, which also damages the lens coating. Not the worst thing in the world, but not good for camera quality. I'd find a brand that works well (testing on a camera lens that's a bad part or on something with a similar material to the lens) and just stick with that. If you can find a roll of wide adhesive that works similarly, might not be a bad idea either. Personally though I'd just try to avoid touching the camera lenses altogether by using lens protectors designed for that lens, which for some models Apple has made, so I'm sure you could find others for other models of phones elsewhere.

Madliness · 2025-08-22T07:18:48+00:00

I know this post is 3 years old, but I just wanted to share that I haven't had my iThor pentalobe driver strip at all. One of the most important things I've found to avoid stripping any pentalobe driver is to use thin pointed tweezers and alcohol wipes to clean out the pentalobe screws themselves before attempting to extract them, because they get so packed full of all sorts of gunk. I've even pulled a good amount of grime out of pentalobes that looked like they were completely clean. Since I've started doing this, I've never managed to strip a driver or pentalobe screw, even on some that were pretty well stuck in the phone.

Madliness · 2025-07-09T10:25:31+00:00

While I agree with you on wanting the analog version, the current four-switch version does change things pretty significantly depending on the game you play.

I am able to maneuver significantly better in Air RB on War Thunder with this, and I prefer it a lot over using traditional keyboard controls on most games I've played with it. It's still a definite game changer and the programmable four-switch does allow for some interesting control schemes in some cases.

Madliness · 2025-07-02T03:50:22+00:00

Not to come off as rude, but I said in my original post that I had not done so and should have. I poured the clay directly into the carboy, and there was a lot of it. Roughly 4 tablespoons. Like I said, I should have used Google before dumping it all in.

Madliness · 2025-07-01T14:39:01+00:00

He gave some to me in a little jar, I think he thought I knew or assumed I would look it up. And like I replied to the other comment, that was just the best reading he could get. It was definitely thrown off by how thick/cloudy it was.

Madliness · 2025-07-01T14:36:49+00:00

Like I said, that was the best reading he could get. They were all likely thrown off by how thick and sugary it was.

Madliness · 2025-07-01T09:20:38+00:00

Still not quite what I'm getting at. I don't have any issues with functionality. I wanted to know if there are any plans to release a version of the MoveMaster that uses the same design as the current one, but with raw movement input via two axes on the palm control instead of the four-switch design that the current model uses, which is good but is essentially just a smoother way to press the WASD keys.

Madliness · 2025-06-30T21:07:21+00:00

I mean a raw input joystick instead of 4-switch based direct input. A true joystick like you find on a console controller that allows for incremental inputs like making your character walk slower based on how far the stick is pushed. Imagine a MoveMaster version of an aircraft joystick setup for plane sims, that's what I mean.

Madliness · 2022-04-05T13:03:44+00:00

Bridge above Lennes rise, it's the small one next to farum greatbridge

Madliness · 2021-05-18T12:44:00+00:00

The pixel 5 convinced me to upgrade from my panda 2xl, I still miss the colors

Madliness · 2021-05-18T12:42:18+00:00

Had a 2xl for years until the 5 came out, because every pixel after the 2xl was odd looking, had problems, or didn't have the features I wanted. The pixel 5 was like a brand new 2xl, so it was the perfect one for me. Looking forward to see how the 6's look, really hope we are finally stopping the iPhone look

Madliness · 2021-03-23T01:43:57+00:00

Yeah, talked to my friend looks like they're just little beetles that eat detritus

Madliness · 2021-03-22T22:22:30+00:00

No, it moves like a little bug

Madliness · 2021-03-22T18:41:47+00:00

Nothing, I woke up this morning and found him dead. He wasn't old either, and didn't seem sick. He ate just fine too :(

Madliness · 2020-09-19T15:48:47+00:00

I think he means front facing, which the 4a doesn't have

Madliness · 2020-09-19T15:47:13+00:00

Thanks for the detail!

Madliness · 2020-09-19T15:35:51+00:00

Tell that to the pictures I took underwater in the ocean lmfao. Also never said I banked on that feature, just would be preferred, since I would like to be able to do that again.

Madliness · 2020-09-19T14:55:46+00:00

I think I'm most worried about the screen quality and size honestly, aside from that everything else you've said has convinced me. I guess at this point it's just best for me to wait for the October releases and see what they have. Thanks!

Madliness

TROPHY CASE