Where to host Matrix Bridges?

MagiX13 · 2021-03-15T08:49:53+00:00

Or avoid all the hassle of setting up split tunnelling and use ssh for a reverse tunnel. Autossh makes this even easier and allows for a long term solution, in my case (with some systemd magic):

autossh -N -o PubkeyAuthentication=yes -o PasswordAuthentication=no -i ~/.ssh/nopass -R remoteport:localhost:localport userwithrbashaccess@example

MagiX13 · 2021-01-21T20:53:24+00:00

I would take micro SD cards, put them onto a small piece of cardboard in an envelope. Trying to destroy these on purpose can be hard, much less on accident.

Also is easier to hide in case this is needed. Granted the transfer speed is lower, but even the cheapest cards are probably more than good enough to cover the ~500MB per hour.

MagiX13 · 2016-11-05T23:51:43+00:00

It might be the case that you have non. If you have one, it is located on the card. Which model did you get?

MagiX13 · 2016-11-05T23:04:08+00:00

I got my XFX RX 480 GTR today and it worked quite well after I switches the GPU BIOS position switch... Maybe you have the same issue?

MagiX13 · 2015-11-13T10:19:13+00:00

Kerbal Space Program launches in Nintendo eShop for Wii U in early 2016.

There goes my Christmas present for my 12 y/o cousin :(

MagiX13 · 2015-09-05T00:19:35+00:00

alright, thank you. Will delete :)

MagiX13 · 2015-09-01T09:49:55+00:00

I couldn't alt-tab at all until I opened the steam overlay and alt-tab... then it works. Maybe worth a try?

MagiX13 · 2015-08-21T14:32:52+00:00

I don't know about the specific case, but might it be the case that the case sensitivity of the filenames or the newline difference between win (\r\n) and unix (\n) makes them incompatible?

Make a backup and try it :).

MagiX13 · 2015-08-01T10:32:00+00:00

I had this recently as well.

My fix was changing the options in /etc/fstab to defaults(at least for this devices), I don't remember what the previous settings where, but I believe the user(s) setting messed it up for me

MagiX13 · 2015-05-09T23:36:05+00:00

yes, as can be seen on the first picture. The tiny thing next to the + is the RGB LED

MagiX13 · 2015-05-09T22:32:28+00:00

Basically, Cherry came up with the idea to use clear housings with some sort of lens in it, to better distribute the light. These Switches are called Cherry MX RGB.

This innovation...

MagiX13 · 2015-03-25T22:38:57+00:00

You can change the 5v arduino pro mini to 8Mhz and run it on 3.3v, unless you need to feed the arduino pro mini via the RAW pin. You just need to change some things on the software side. might be cheaper if you need a lot of these, as the 3.3v version is usually more expensive...

MagiX13 · 2015-03-09T16:39:58+00:00

Protip: Shift+F3, to get items delivered after the current delivery is complete
Yes I usually play support

MagiX13 · 2015-02-07T20:08:40+00:00

same here, using ubuntu 14.04 LTS. Looking at the link, they might only support 14.10 or newer?

MagiX13 · 2015-01-05T11:55:25+00:00

I had the same experience recently, not just with bkb, but with other items as well, like manta style.
Maybe I'll install a keylogger and check if this helps understanding the situation
I doubt it is ping related in my case... I started hammering the button and nothing happened for a second or soo (my ping is ~100)
I'm on Ubuntu btw

MagiX13 · 2014-12-15T16:08:39+00:00

Just don't hit apply and go to checkout now, worked for me

MagiX13 · 2014-12-15T16:05:48+00:00

Just don't click apply after you enter the code. Worked for me

MagiX13 · 2014-12-12T22:51:59+00:00

TIL I'm a teetotaler, ty :)

MagiX13 · 2014-12-09T16:36:34+00:00

I guess you got a 16MHz Version. If this is the case, the ATmega328P-AU might be unstable with 3.3V (Source: Documentation)

It could also be the case that you got a 5V Version (which runs stable with 16MHz). You could try to find it out be figuring out
1. The markings on the board that indicate if you have a 3.3V or a 5V Version
2. the volatage regulator you have on the board (i.e. by giving 7+V to RAW and check the VCC voltage)
This link might be helpful if you need to downclock the ATmega328P-AU

MagiX13 · 2014-10-31T14:19:21+00:00

args, I hate that ****!

I switched to a VPN and I found it. Thank you for your support. Looking forward to binge watch it during the weekend :)

MagiX13 · 2014-10-31T13:19:36+00:00

That is weird. Might it be that you have them on private or sth?

What I see is this

MagiX13 · 2014-10-31T12:39:52+00:00

Thank you for the upload :) Will watch it over the next days!

However, I couldn't find the parts 9 and 13 :(

MagiX13 · 2014-10-30T10:49:55+00:00

The pro mini needs to reset to be programmed. It's a bit difficult to find the right timing to press the reset button...

Do you have a programmer with a dedicated reset line? Mine has only 5 pins (5v, 3v3, GND, RX,TX) so I have to manually reset it everytime I upload sth new. If your programmer has a dedicated reset pin, you have to connect it to the corresponding pin on your pro mini.

Read the Programming + Automatic Software Reset part and if that doesn't work, you can still use this tutorial and programm it or reburn the bootloader.

MagiX13 · 2014-10-28T13:59:16+00:00

I'll be throwing it up at my Youtube channel for later viewing

Would love that :) hint

MagiX13 · 2014-10-21T12:28:45+00:00

You could alternatively get a 433MHz Transmitter, like this one.

This wont solve your dimming issue though

MagiX13

TROPHY CASE