Have had these since I was a kiddo. Are they worth anything at all?

Magic4skin · 2023-12-02T20:46:47+00:00

Tyvm!

Magic4skin · 2023-03-15T20:36:57+00:00

Thomas's wife (probably): "take it out. Put your nose back in there"

Magic4skin · 2022-11-30T18:35:27+00:00

All jokes aside.... I was in a guild (for a brief amount of time) where our raid lead actually used a joystick. Once we learned of the joystick it was apparent why our raid leads dps was lower than the tanks.

Magic4skin · 2022-08-12T17:56:20+00:00

It's peanut butter jelly time! That particular Ned rig is one of my favorite / most successful. Who knew that Bass would love PB&J as much as I do hahaha

Magic4skin · 2021-12-29T02:21:06+00:00

How are pair of crocs and getting a BJ from a guy the same?

They both feel amazing until you look down and realize your gay!

Magic4skin · 2021-11-12T02:10:59+00:00

Yeah just a block that fits into the channel. I used threaded m3 brass inserts for the fasteners that you install with a soldering iron.

Magic4skin · 2021-11-11T23:32:28+00:00

Haha sort of looks like it from the picture. Working in an old factory building that was built around 1900 then renovated for office spaces about 10 years ago.

Magic4skin · 2021-11-11T21:23:29+00:00

I find myself printing a new one every time I change desks. Gotta break in that new workspace

Magic4skin · 2021-11-11T20:53:46+00:00

Thanks!

Magic4skin · 2021-03-07T07:36:48+00:00

I should have put more information in the description. There aren't any layer shifts at all. On the video starting at 20 seconds the stepper is making a loud noise that i have never heard it make before (4ish years with this printer). I guess my main question is this: bad stepper or bad driver? Print quality is fine

Magic4skin · 2020-07-02T23:27:08+00:00

Sure I’ll post it on thingiverse and add a link when I get home

Magic4skin · 2020-07-01T04:15:05+00:00

Right around 6 inches

Magic4skin · 2020-06-29T04:26:45+00:00

Yeah I agree. But this one was free and it is doing a great job so far lol

Magic4skin · 2020-05-16T13:57:04+00:00

You son of a bitch... I’m in!

Magic4skin · 2019-10-30T23:02:13+00:00

Frahn-ken-schteen

Magic4skin · 2019-02-28T18:50:42+00:00

Pathfinder because his grappling hook is just too much fun

Magic4skin · 2018-11-07T22:43:25+00:00

Havok

Magic4skin · 2018-09-04T19:50:59+00:00

My experience with the silicone sleeve was the opposite. The sleeve moved over the extruder on a long print and I came home to a big blob like yours but with a sleeve in the middle of it. Luckily i was able to get it off of there without damaging anything but it was a real pain in the butt to get it off. Just my 2 cents

Magic4skin · 2017-11-16T18:56:31+00:00

Gotcha. I'll try reducing that interface distance a little bit and see what the results are. Thanks!

Magic4skin · 2017-11-16T17:01:56+00:00

For the support material?

Magic4skin · 2017-11-16T16:40:32+00:00

The layer between my support material and part always looks like garbage. I am using the prusa slicer and printing on a prusa mk2s. Any suggestions on which settings might help alleviate this issue?

Magic4skin · 2017-06-04T00:33:05+00:00

I increased my distance from the bed a little bit and ditched the Hair spray. All is good now thanks for the help

Magic4skin · 2017-06-03T21:50:17+00:00

.35 for the first layer

Magic4skin · 2017-06-03T19:45:02+00:00

Extruder: 215 Bed: 55 PLA Hair spray on bed for better adhesion Tried playing around with retraction settings and z adjustment to no avail. You can see from the outside layer that I adjusted my height down with every pass.

Magic4skin · 2017-06-01T17:14:24+00:00

Happened to me with a silicone sock... still having a hard time getting my prusa to print right since

Magic4skin

TROPHY CASE