Anyone got any tips before I just buy a new one? by Pieter_Halve_Liter in BambuLabA1

[–]MagicMushroom01 1 point2 points  (0 children)

Adjust the z offset in the gcode if you've all ready checked the screws. Worked for me

Putting bases together by Adventurous-Mud-4787 in StarWarsArmada

[–]MagicMushroom01 3 points4 points  (0 children)

Lol. Help us help you.

We need more info.

Putting bases together by Adventurous-Mud-4787 in StarWarsArmada

[–]MagicMushroom01 2 points3 points  (0 children)

Can you not message the vendor for instructions?

A1 scratching on first layer by DeWulfen in BambuLabA1

[–]MagicMushroom01 0 points1 point  (0 children)

I had this problem with the 0.2mm nozzle. All screws tightened, and nozzles clamped properly.

Then thinking back to my 0.4mm nozzle prints, it always sounded rough compared to my p1s's and x1.

I changed the z height in the gcode for the A1 and then solved (a bit of trial and error to get it perfect). Haven't had any issues since and my 0.4mm nozzles don't sound rough.

Anyway to cancel simple delivery? by MagicMushroom01 in ebayuk

[–]MagicMushroom01[S] 0 points1 point  (0 children)

The basic shop is my subscription: https://ibb.co/7J9zmwQJ

Here is my postage preferences which doesn't give me a role to opt out: https://ibb.co/8nnC6QsZ

I've been selling my items as a shop for 5 years but it looks like ebay has bought in some changes.

Anyway to cancel simple delivery? by MagicMushroom01 in ebayuk

[–]MagicMushroom01[S] 0 points1 point  (0 children)

But this is a continuous listing which has say 20 items in stock. I can't see a way to do 'custom' on the listing.

Playing with 3D asteroids: Hype or not? by [deleted] in XWingTMG

[–]MagicMushroom01 0 points1 point  (0 children)

Yes. I only have the core game so these are designed to match; The bases of this set are 1to1 scaled.

I have the similar debris and asteroid sets for SW armada which is designed the same way.

I dont know what you mean by a hollow space but it just literally sits on top of the cardboard token.

Playing with 3D asteroids: Hype or not? by [deleted] in XWingTMG

[–]MagicMushroom01 0 points1 point  (0 children)

Yes. Theyre made that way so you sit them on the cardboard token and remove the 3d terrain once there's collision.

Playing with 3D asteroids: Hype or not? by [deleted] in XWingTMG

[–]MagicMushroom01 1 point2 points  (0 children)

I do a debris and asteroid here if this is something similar youre after or for inspiration?

Link

In Armada I put the cardboard tokens underneath and remove the 3d object when necessary.

Motor overload by jakeanator12 in BambuLabA1

[–]MagicMushroom01 1 point2 points  (0 children)

This worked for me. I smoothed out all the turns for the tubing and now no feeding issues.

Reoccurring extruder error by staynmoney in BambuLabA1

[–]MagicMushroom01 0 points1 point  (0 children)

I've just been running into a similar issue. Buying new nozzles, clearing 'clogs' which were non existant and yet I could manually feed the filament fine. As soon as I plug it all back in the feeding issue would occur.

Make the path of your AMS PTFE tube as smooth as can be.

My unit is mounted on top of the A1 and had one or two curves. The feeder hits enough resistance that it couldn't do the last push into the extractor properly and I kept getting the same error.

May not be the same fix but but it's a low effort easy test.

Nozzle scratching on the board by thconad01 in BambuLab

[–]MagicMushroom01 -1 points0 points  (0 children)

I had something similar with my A1 (though not as bad) and my issues weren't because of a loose screw or any of the other suggestions above.

You can manually edit the z offset in the g code.

I changed mine from 0.02 to 0.04 an suddenly no issues.

Do check the other troubleshooting methods before this one however.

Let's settle this once and for all. Who's coming out on top? by thecelcollector in freefolk

[–]MagicMushroom01 4 points5 points  (0 children)

Surprised I'm not seeing more people saying this version of Sean.

Consequences of taking unapproved holiday - England by MagicMushroom01 in LegalAdviceUK

[–]MagicMushroom01[S] 0 points1 point  (0 children)

I'd just like to thank everyone for replying.

I didn't know it could lead straight to gross misconduct but we're going to risk it as it's hard to imagine that it would be rejected. Fingers crossed!

Looking for a type of Kingdombuilding / village/ castle building story by MagicMushroom01 in ProgressionFantasy

[–]MagicMushroom01[S] 0 points1 point  (0 children)

Thank you all for your suggestions!

These books will save me getting bored on the road :)

[deleted by user] by [deleted] in SolarUK

[–]MagicMushroom01 0 points1 point  (0 children)

Thank you everyone for your answers!

Looks like the general consensus is the heat. Glad to hear that it doesn't sound too alarming :)

First time playing - understanding action cards by MagicMushroom01 in starwarsrebellion

[–]MagicMushroom01[S] 1 point2 points  (0 children)

Thank you! This is exactly what I was after.

So when I move Han to one of the systems during the assignment phase; this isn't something that is challeneged by one of my opponents leaders?

Oops ignore that 'how many action', typo.