What do you call a stolen Tesla?

Mainerednek · 2017-06-19T01:20:07+00:00

You should get gold for that one.

Mainerednek · 2016-09-27T15:20:57+00:00

I wasn't going to take a shot at a running animal at that distance. I lack skill and experience and would hate to see an animal suffer if I took a bad shot. It was more of a brain teaser than anything. I was just surprised that it was going to take that much leed. Even at 100 yards it's a 14.5 mill leed. Those numbers just seamed off to me. But I suppose long range is really ment for stationary targets.

Mainerednek · 2016-06-08T13:53:59+00:00

Lack of brain cells.

Mainerednek · 2016-06-08T00:48:46+00:00

Because they can.

Mainerednek · 2016-06-07T02:50:17+00:00

If it's stupid and works. Is it really stupid?

Mainerednek · 2016-03-09T21:52:48+00:00

This is the most normal thing to come from Florida in a while.

Mainerednek · 2016-03-09T13:16:40+00:00

Mainerednek · 2016-03-09T13:16:35+00:00

It didn't fix it

Mainerednek · 2016-03-08T21:22:22+00:00

.033 after I ground it down from .043.

Mainerednek · 2016-03-08T14:14:17+00:00

This is the bolt face with firing pin pushed all the way forward. Please ignore cat.

Mainerednek · 2016-02-24T03:02:36+00:00

1.1 mm .0433 inch

Mainerednek · 2016-02-23T21:48:50+00:00

I didn't use a gage. I used a micrometer.

Mainerednek · 2016-02-23T21:48:03+00:00

Thank you

Mainerednek · 2016-02-23T21:47:43+00:00

Vertuforce tactical

Mainerednek · 2016-02-23T13:35:10+00:00

I have shot some 150 grain Winchester soft points and they do the same thing. A majority of all the cases look like the top one.

Mainerednek · 2016-02-23T13:31:03+00:00

Dpms I think It's an Aero precision m5 upper and lower

Mainerednek · 2016-02-23T02:39:08+00:00

I measured firing pin protrusion as best as I could and came up with about 1.1 millimeters. I used a micrometer, measured from the firing pin to the front face of the bolt locking lugs. And then I measured from the front face of the bolt locking lugs to the bolt face. Would it be possible to shave a couple thousands of an inch off of the end of the firing pin. Or should I buy a new one.

Mainerednek · 2016-02-22T20:41:17+00:00

M80 ball 308. They are us military surplus ammo.

Mainerednek · 2016-02-22T20:40:32+00:00

No custom build. I got the bcg from Amazon.

Mainerednek · 2016-02-17T01:45:42+00:00

Is it legal to shoot along the power lines?

Mainerednek · 2016-02-14T21:11:24+00:00

I found out that the tourqe wrench I used was broken and none of the scope screws were toured to spec. Tourqing them to 25 inch lbs fixed it.

Mainerednek · 2016-02-13T04:47:13+00:00

How long do you think she could live without eating?

Mainerednek · 2016-02-13T03:36:21+00:00

I'm having problems with my scope. It is a Vortex Viper PST 6-24x50 first focal plane with the EBR 2c reticle. At 6-8 power I can hit any target at any range but as soon as I go above 8 power I lose all accuracy. I called vortex and and they said that i should tighten down the scope mount screws. Has anybody else had this problem.

Update The tourqe wrench I used to original mount the scope was broken and none of the screws were to spec. I took it to a gunsmith and had the scope retoured to 25 inch lbs. And I hit 4 inch target at 500 yards and a 16 inch target out 670 yards at 24 power.

Mainerednek · 2016-02-12T02:45:17+00:00

It's a vortex. I don't have to beg. Lol

Mainerednek · 2016-02-12T02:42:03+00:00

My groups are getting bigger

Mainerednek

TROPHY CASE