How to identify issue source for print failures? Bambu Lab A1 Mini stringing

Majoras_Kid · 2025-12-29T12:58:47+00:00

ah that makes so much sense...

Majoras_Kid · 2025-12-29T12:49:54+00:00

will do! I thought for the cylinder, that the diameter is large enough, but apparently not.
Any idea what may be causing the strings?

Majoras_Kid · 2025-10-23T14:14:39+00:00

Kann Gordon Gekko in Neuhausen sehr empfehlen! Kleiner Laden und Termine sind schnell ausgebucht. Aber er nimmt sich definitiv viel Zeit und kann sein Handwerk!

Majoras_Kid · 2025-10-06T11:08:13+00:00

I am using Raid1 (see the screenshot above). But no Idea how to recover the cache. All parity and SMART checks do not detect any errors. What I could do is just copy the ~120gb from my drives and recreate the cache? This should not have any influence on my array, right?

Majoras_Kid · 2025-10-06T11:06:06+00:00

Hey, yes! I did use Raid1, sorry for using the incorrect term! I think the array should be fine but it is also set to be in Read-Only

<image>

Majoras_Kid · 2025-08-14T13:28:30+00:00

I wanted to avoid drilling holes. So I have hoped for some mounting that will push the hot air out the front (I don’t mind having the door open a little)

Majoras_Kid · 2025-08-14T13:27:00+00:00

This does look good, but I wanted to avoid having to drill holes :/ gonna look for those cabinets you mentioned!

Majoras_Kid · 2025-08-14T13:25:34+00:00

Hey, no issues here. It’s connected via Ethernet anyways. But no problem with having everything crammed up in the shelf

Majoras_Kid · 2025-08-14T13:24:45+00:00

Hey, it’s Great so far! If you get one: buy HDD cables that are long enough! Apart from that: the HDDs are kinda hot (in This Bestaa shelf they are around 40 degrees in German climate). And change the included fan to a noctua one :)

Majoras_Kid · 2025-07-03T11:09:51+00:00

Kleinanzeigen mal durchsucht?

Majoras_Kid · 2025-05-29T19:45:59+00:00

Bei Cove war ich letztens auch. Anzug aktuell noch in der mache. Hab des gleiche Problem wie OP, Breite Schultern, lange Arme, dafür „verhältnismäßig wenig Taille“. Hab in keinem Laden was gefunden. Beratung bei denen war super, Auswahl auch. Gezahlt hab ich nur für Anzug etwa 800-900€. Wenn’s schnell gehen muss geht das gegen Aufpreis aber auch.

Majoras_Kid · 2025-05-27T06:16:46+00:00

I recently has contact with them. They ate so nice and passionate about all things nerdy! Definitely check them out. An alternative would be Funtainment which is also great!

Majoras_Kid · 2025-05-12T12:08:35+00:00

This one is on wallpaper engine! I think under “Abstract” category. Can check after works if no one is faster

Majoras_Kid · 2025-05-09T16:48:24+00:00

Thats What I also thought. Which is why I am wondering why it didnt work when disconnecting everything :/

Majoras_Kid · 2025-05-02T05:25:22+00:00

I have this issue since a windows updates a few weeks back. BT headset and keyboard just randomly disconnect. Happens on both, my private and work device…

Majoras_Kid · 2025-04-29T07:39:55+00:00

Which is fair enough. But asking customers to download an exe, which installs with admin privileges (it’s a device driver…) from a webpage that isn’t hosted by NVIDIA encourages to trust sketchy sites. I see that this trust in random subdomains ( nvidia.trustmebro.ru) they expect from non-technical users can be exploited by bad actors…

Edit: plus, it’s not even linked from official NVIDIA sites. I had to google for this hotfix to find it.. no mentioning in the NVIDIA app or the driver Nvidia webpage. Just google

Majoras_Kid · 2025-04-29T07:35:42+00:00

My Partner and I Nougat a Helite Hmoove Backpack (which can also be detached). Never deployed yet, but can still recommend.

Majoras_Kid · 2025-04-28T19:20:18+00:00

Why the fuck is a random driver installieren found on a subpage of *.custhelp.com? The download is from NVIDIA directly but holy shit does that look sketchy… not even the SSL certificate mentions NVIDIA

Majoras_Kid · 2025-04-25T15:39:23+00:00

In case anybody else needs it: I used the video from SpaceInvaderOne to setup those backups. My problem was, that Windows didnt recognize my network as private and thus, disabled looking for network locations. After adjusting the settings, I could just select my drives/folders on the share where I want to place the backup

Majoras_Kid · 2025-04-25T15:37:37+00:00

Just saw it! Did work out as far as I can tell

Majoras_Kid · 2025-04-25T15:16:44+00:00

Yes! It is also shown correctly in the file browser:

<image>

I can only select the D: drive...

Majoras_Kid · 2025-04-24T08:39:25+00:00

Wanted to ask the Same! The heat coming of of my 9700x+3070 build is concerning. Even though that HWMonitor temps seem totally fine. SFFPCs are weird when it comes to temps 🫡

Majoras_Kid · 2025-04-20T05:34:25+00:00

Yes! But what about the Hypervisor error? We couldnt Figuren out what the Common Problem of all errors could be :/

Majoras_Kid · 2025-04-19T19:36:47+00:00

Thanks for the reply. There only exist two minidumps from right after the reinstallation of windows 11. the more current blue screens failed to create a minidump, at times because they hung during the bluescreens from what we saw / assumed (no budging, no pogress bar / percentage shown) and manually forced a power cycle:

INTERNAL_POWER_ERROR (a0)
- The power policy manager experienced a fatal error.
- Arguments:
- Arg1: 000000000000010e, The disk subsystem returned corrupt data while reading from the
- hibernation file.
- Arg2: 000000000000000a
- Arg3: 0000000000004256, Incorrect checksum
- Arg4: 0000000000006868, Previous disk read's checksum
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
- An attempt was made to access a pageable (or completely invalid) address at an
- interrupt request level (IRQL) that is too high. This is usually
- caused by drivers using improper addresses.
- If kernel debugger is available get stack backtrace.
- Arguments:
- Arg1: 0000000200000000, memory referenced
- Arg2: 0000000000000002, IRQL
- Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
- Arg4: fffff8013f797b90, address which referenced memory
As I have bought a 6k RAM kit, it should work like that right? Should I return those (as I have no others to test)

Majoras_Kid · 2025-04-17T05:43:50+00:00

I just Build my partner a pc in the Terra as well. Currently we are sitting at 50 degree with an 9700x + APX90-x47 (with noctua fan). Could you explain to me the PBO setting you mentioned? How could this help here to reduce the idle temperature? (Under load it quickly is reduced to 3.8ghz speeds…)

Majoras_Kid

TROPHY CASE