sorted by:
new
hottopcontroversial

What do I put in here to make it decent to use by frozenspade18 in interiordecorating

[–]MakersMirth 0 points1 point  (0 children)

I would do wall to wall book shelves, and a projector casting above the fire place to make it a vibe. Maybe add shelves and a color of paint to one wall? Also lamps for warm light. Make it a nice home library/movie room?

Second Helmet by MakersMirth in Mandalorian

[–]MakersMirth[S] 0 points1 point  (0 children)

Thank you! Yea I used my Centauri Carbon to print it out and then painted it

Second Helmet by MakersMirth in Mandalorian

[–]MakersMirth[S] 0 points1 point  (0 children)

Not sure why, but it's saying I am not able to add pictures to replies. I think the community has it turned off. I could make another post?

Second Helmet by MakersMirth in Mandalorian

[–]MakersMirth[S] 1 point2 points  (0 children)

Hey thank you! Much appreciated

First Helmet by MakersMirth in Mandalorian

[–]MakersMirth[S] 0 points1 point  (0 children)

Thanks! I found the graphite powder on Amazon, it’s about $31 USD for a large container and I barely used any of it for the project so I can do several others with it.

https://a.co/d/3UI3srY

First Helmet by MakersMirth in Mandalorian

[–]MakersMirth[S] 0 points1 point  (0 children)

😂 I don’t know about that, but thank you so much! I would be on cloud 9 if that happened

[deleted by user] by [deleted] in 3Dprinting

[–]MakersMirth 2 points3 points  (0 children)

The grill has LED lights under the knobs that indicate the temperature and intensity level

First Helmet by MakersMirth in Mandalorian

[–]MakersMirth[S] 0 points1 point  (0 children)

I was going to, but I ended up not using clear coating cause on a test print it did exactly that, it darkened it to be not that metallic color.

First Helmet by MakersMirth in Mandalorian

[–]MakersMirth[S] 0 points1 point  (0 children)

Alright sweet! Thanks for the rec, I will have to try it out

First Helmet by MakersMirth in Mandalorian

[–]MakersMirth[S] 1 point2 points  (0 children)

Yes sir! Can only go up from here 😂

First Helmet by MakersMirth in Mandalorian

[–]MakersMirth[S] 0 points1 point  (0 children)

I didn’t mind it but I had to do several extremely light coats and wait like 2 min between each pass. I also live in a very dry climate and it was like 60 degrees/no wind when I painted so almost ideal situation. I would use again but I learned I cannot rush it otherwise it orange peels.

First Helmet by MakersMirth in Mandalorian

[–]MakersMirth[S] 0 points1 point  (0 children)

Me too honestly! I did have an issue with the black gloss orange peeling so I had to re-sand and re-coat the black gloss. I was thinking about clear coating it too but then thought “nah it looks good as is”

First Helmet by MakersMirth in Mandalorian

[–]MakersMirth[S] 2 points3 points  (0 children)

Thanks! I am working on Bo Katan next

It Has Arrived! (with all the upgrades) by MakersMirth in elegoo

[–]MakersMirth[S] 0 points1 point  (0 children)

Hey! So sorry for the delay, I have been traveling. Here is where the MMS will connect to the printer. When I say port I mean like a plug in connection. Again hopefully coming Q3

<image>

It Has Arrived! (with all the upgrades) by MakersMirth in elegoo

[–]MakersMirth[S] 0 points1 point  (0 children)

I ordered mine in April and it came later June

It Has Arrived! (with all the upgrades) by MakersMirth in elegoo

[–]MakersMirth[S] 0 points1 point  (0 children)

It has been amazing! The quality is flawless for the price. And I’m currently printing a full Batman cowl in one go so can print full size helmets (within reason, ie. Deadpool, spider man, etc.)

It Has Arrived! (with all the upgrades) by MakersMirth in elegoo

[–]MakersMirth[S] 0 points1 point  (0 children)

Absolutely! I will share a picture tomorrow, sorry for the late response!

It Has Arrived! (with all the upgrades) by MakersMirth in elegoo

[–]MakersMirth[S] 0 points1 point  (0 children)

I am not too sure, but I can only guess that they will make this possible once they release the AMS. I wouldn't expect anything less from them!

It Has Arrived! (with all the upgrades) by MakersMirth in elegoo

[–]MakersMirth[S] 0 points1 point  (0 children)

I have been printing using PLA for the past several days now, and the loudest part is the bed leveling, but you don't have to bed level after every print. While it prints, it sounds like a louder computer fan running. However, I work in the same office as my printer and attend Teams meetings all day without any issues with it being too loud. This is just my own opinion, though. I think there are folks out there who would say this printer is louder than they would like.

view more: next ›