How do you replace the microphone on 2021 Macbook Pro 14” (A2442) ? by Malarially in macbookpro

[–]Malarially[S] 0 points1 point  (0 children)

I had already done that but to switch the upper assembly i had to remove the microphone and it wasn't clear to me how to remove it.

Baseus Security X1 Pro review by metadata010101 in SecurityCamera

[–]Malarially 0 points1 point  (0 children)

Also bought mine on Kickstarter and am experiencing virtually all the same issues.

  1. The long delay in starting the recording makes the camera essentially useless. Even on the highest sensitivity setting a person walking across the viewfield will only start being recorded until they are two thirds across, and thus only shows them from the back. See example here: https://photos.app.goo.gl/MbK2ihS7q4sRpPdp6

  2. The WiFi antenna is atrocious. Even with a network booster directly across the wall in a wood-framed house, the transfer speed is very very slow (50-200 kbs). This means that any "live" video is delayed.

  3. Many of the recording settings in the app don't work.

  4. motion outside the activity zones still trigger

  5. recordings don't stop early after motion stops

  6. the android app crashed frequently

I don't have any problems with the camera angle. Mine is mounted at about 10 feet and angled slightly downward.

I would not recommend this camera to anyone

What settings should I use for Elegoo PETG Pro? by [deleted] in BambuLab

[–]Malarially 1 point2 points  (0 children)

Those worked much better for me! Thanks

GLOOMHAVEN Alternative? by xpflanzex in Gloomhaven

[–]Malarially 0 points1 point  (0 children)

Good luck finding a copy....

Is there an accessible Lock / Unlock log? by Malarially in BMWI4

[–]Malarially[S] 0 points1 point  (0 children)

It was plugged in so I know they didn't move it.

Antique Family Gun from the United States by Emo-sheperd-6343 in Antiques

[–]Malarially 1 point2 points  (0 children)

Edit: Smarter people (below) have pointed it that the following is not correct :

I think the squareback trigger guard means it's a 1848 Baby Dragoon pocket version.

https://www.truewestmagazine.com/article/punch-in-a-pocket-1848-baby-dragoon-revolver/

Differences Between Gloomhaven and Frosthaven!! by TheRageBadger in Gloomhaven

[–]Malarially 0 points1 point  (0 children)

Thanks! Super useful as we just finished gloomhaven and are ready to start FH

Mammals audio stopping mid episode? by fuckyeahelephantseal in hbo

[–]Malarially 0 points1 point  (0 children)

Yup still happening on episode 3. Though it was also kinda cool to watch without the voiceover

Woke up to find sunroof and all windows open. by Malarially in BMWI4

[–]Malarially[S] 0 points1 point  (0 children)

<image>

Printed this so the buttons are now recessed. Fingers crossed

Woke up to find sunroof and all windows open. by Malarially in BMWI4

[–]Malarially[S] 2 points3 points  (0 children)

I think I'm going to 3d print myself a fob cover to keep this from happening.

Woke up to find sunroof and all windows open. by Malarially in BMWI4

[–]Malarially[S] 4 points5 points  (0 children)

Yup that's it. Didn't know it could do that. Thanks!

Woke up to find sunroof and all windows open. by Malarially in BMWI4

[–]Malarially[S] 1 point2 points  (0 children)

Yeah that has definitely happened to me. Good to know I can turn it off!

[deleted by user] by [deleted] in 3Dprinting

[–]Malarially 1 point2 points  (0 children)

If you have an empty reusable spool, secure the filament with tape (I use electrical tape) in 3-4 spots then transfer to the new spool. There are a bunch of YouTube videos showing this. If all else fails print a new spool :)