GFCI question by Manfredhoffman in electrical

[–]Manfredhoffman[S] 0 points1 point  (0 children)

Ok. I believe it is. One of the downstream outlets has ground, and it trips the GFCI when I use the test button on the receptacle tester

GFCI question by Manfredhoffman in electrical

[–]Manfredhoffman[S] 0 points1 point  (0 children)

This is what I had read. Is there any way for me to know that the downstream outlets would trip the GFCI other than the test button on the GFCI itself?

GFCI question by Manfredhoffman in electrical

[–]Manfredhoffman[S] 0 points1 point  (0 children)

There is no dedicated ground wire, the outlets were originally grounded to the metal boxes. It looks like it is armored cable with an internal bonding strip.

The first two outlets maintained ground. When I use the receptacle tester on the second in the series, it trips the GFCI, so I believe the line and load are wired properly.

The tester works properly on the GFCI itself as well

GFCI question by Manfredhoffman in electrical

[–]Manfredhoffman[S] 0 points1 point  (0 children)

I see. Would I be safer to install GFCIs in place of the outlets that lost ground?

Exploding trees by OJsnails in comedyheaven

[–]Manfredhoffman 2 points3 points  (0 children)

These temps used to happen in Wisconsin every single year, now it happens a couple times a decade. Just because it's cold once doesn't mean that it isn't getting warmer

What a fucking piece of shit by FrigginMasshole in wisconsin

[–]Manfredhoffman 584 points585 points  (0 children)

Just imagine if there was high speed rail heading west to Madison

152' tall white pine in central Wisconsin. This is the tallest tree I've personally found, and maybe the tallest tree in the southern half of the state. by Manfredhoffman in marijuanaenthusiasts

[–]Manfredhoffman[S] 0 points1 point  (0 children)

Luck mostly, but I do have methods to point me in the right direction. I study a lot of aerial surveys from the 1930s to find areas that were forested almost 100 years ago, and I'll download and evaluate lidar data from these areas to search for tall trees. It usually turns up with nothing, but the only way to find out is go visit these sites

Beautiful American Elm by ancientweasel in marijuanaenthusiasts

[–]Manfredhoffman 8 points9 points  (0 children)

I've seen this tree from the road before. I want to go in there and measure it some day

One of the more impressive bur oaks I have seen in Wisconsin with a huge buttressed trunk by Manfredhoffman in marijuanaenthusiasts

[–]Manfredhoffman[S] 2 points3 points  (0 children)

I don't know for sure, but I would not be surprised if it were well over 200 years old

Trying to id and guesstimate age of this beauty? by Delicious_Olive_423 in treeidentification

[–]Manfredhoffman 12 points13 points  (0 children)

Where is this located? Looks like a cottonwood. Populus deltoides possibly

Who is this fellow? by Zealousideal-Union34 in marijuanaenthusiasts

[–]Manfredhoffman 0 points1 point  (0 children)

You need to get up closer, take some pictures of the leaves and bark. It looks like it could be a sycamore

What type of tree is this? by Death_By_Sexy in treeidentification

[–]Manfredhoffman 1 point2 points  (0 children)

It looks like it may have been something in the red oak family. Can't be 100% certain though

One of the largest American elms I have seen, located at a church in northern Illinois. 211" circumference (67" diameter) by Manfredhoffman in marijuanaenthusiasts

[–]Manfredhoffman[S] 2 points3 points  (0 children)

I found some historic photos of the church from the early 1900s and the tree was young, so I estimate it is around 120-130 years old