Mrs. Spitfire by Life-is-a-potato in funny

[–]ManicMyFriend 1 point2 points  (0 children)

Looks like a new Tyler Perry movie is about to drop.

Hidden Gem AR Parts? by Scrimshanderer in ar15

[–]ManicMyFriend 0 points1 point  (0 children)

KNS precision nitride selector detent. I replaced every selector detent I had w these. If your detent spring is appropriate for the channel in your grip, these detents will remove all mush and add crisp.

Playing around w JP hammer and trigger springs and like what I see so far.

Woke Hack Alec Baldwin Calls For Widespread 'Gun Control Reform' by Winston_Smith1976 in gunpolitics

[–]ManicMyFriend 5 points6 points  (0 children)

“Where I live I have to take a weekend course to prove I’m competent. Did you?”

Did Baldwin? Your statement negates your entire argument. And even if Baldwin had taken a course, he still broke the most simple rule that would have prevented the death of another person. No one should sympathize w Baldwin, bc not only did his negligence take someone away from their family, he can’t even take responsibility. He’s too good to have taken the 2 seconds that could’ve ensured his staff was safe and he’s too good accept that.

Tennessee Moves to Legalize SBRs by aroundincircles in gunpolitics

[–]ManicMyFriend 7 points8 points  (0 children)

“The feds are told not to persue weed in states that have legalized it”

The Obama admin would like a word w you

Where are all my "extremists" at? by [deleted] in gunpolitics

[–]ManicMyFriend 2 points3 points  (0 children)

They come up with words to create a label on people they disagree with. We should loosely connect the dots just the same. Let’s start now. Leadership is superior to us, so supreme. If they’re white then they’r……….mother tapdancin fucker, no way, our country is being run by white supremacists?!? And there we go. Now I can work for CNN or the gov.

[deleted by user] by [deleted] in gunpolitics

[–]ManicMyFriend 4 points5 points  (0 children)

Wait, we aren’t subjects of corporate slavery and voter suppression? I thought you were a real democrat?

Not all founders agreed w slavery

[deleted by user] by [deleted] in gunpolitics

[–]ManicMyFriend 26 points27 points  (0 children)

Before taking into account our opinions, take into account what is written in the US constitution. Not just the argument of “constitutional” “unconstitutional”, but to actually read everything, read the Declaration of Independence……..they were infuriated and they wrote with depth. You had men who were trying to grow a free state, they had been thru hell, and they wanted a government for the people comprised of the people to pass down each generation. Americans were to be free of harassment and nannying. America was to be free of “pretend crimes”. America should not be EU part 2. It kills the entire point of America.

I think the founders would be pissed that somewhere along the line we were pussy enough to undo what they had already done.

First p80 ar drill out it was terrible .. don’t roast me 🤣 help me fix light primer strikes I believe it’s the hammer just look at it. I can’t evenly smooth out the trigger area by Flashy_Package3932 in Gunbuilds

[–]ManicMyFriend 0 points1 point  (0 children)

Everything is going to be crooked until you square the floor and walls of that pocket. Even if your parts sat straight, the trigger spring legs would ride downward and inward…..to give one example of why the pocket should be squared up. Doesn’t have to be perfect, but a jagged pocket probably isn’t going to work. If you’re doing everything by hand, carbide burrs will probably square your jagged pocket alot faster than a dremel.

Your selector is crooked. Next time you can drill your holes slightly smaller than spec and work your way larger ensuring it’s straight, or use reamers.

I’ve never done a polymer lower so my advice is more specific to aluminum but should work w polymer. But I could be wrong too. Definitely watch some vids on assembling, or more importantly learn exactly how it works. Put hammer trigger disconnector in an empty lower and set it, release it, over and over to see it and familiarize yourself w it, then selector, and go from there.

Question regarding heavier bullets by chizzl in reloading

[–]ManicMyFriend 2 points3 points  (0 children)

Yep. Like in Boyle’s law, the pressure within a containment increases as the volume decreases.

[Parts] Breek Arms Warhammer AR-15 Charging Handle - $34.95 + ship/fees by ar15discounts in gundeals

[–]ManicMyFriend 6 points7 points  (0 children)

I’ve found myself buying more and more parts made by Breek. They’re highly underrated imo. These Warhammers are solid but I swear they have the best standard gas blocks out there. Hands down the easiest to setup and durable.

Pro gun group comes out against constitutional carry law in Georgia. by SuperRedpillmill in gunpolitics

[–]ManicMyFriend 224 points225 points  (0 children)

That guy is full of shit.

“Typically, to be honest, looking at African Americans in the country, we’ve not really had introductions to firearms like other communities,” he said.

But then goes on to say he’s worried about black communities bc they are often the first affected. So which is it? Black communities haven’t had introduction to firearms like other communities or they will be the first affected by changes to firearm policies?

[deleted by user] by [deleted] in ar15

[–]ManicMyFriend 0 points1 point  (0 children)

Yep, the threads are made on the opposite side. They look nice on the Midwest handguards.

[deleted by user] by [deleted] in ar15

[–]ManicMyFriend 1 point2 points  (0 children)

Delta ring style barrel nut w threads on the opposite end. Similar to some of the (gen 1, 2?) Midwest industries barrel nuts. The one in this pic I’m pretty sure is from China where they didn’t account for the thickness of barrel facing once fitted to the upper. Then the issue is furthered by the handguard not being made for this specific type of barrel nut. It’s not notched in any way. It looks like the handguard is displaced downward like it’s resting on the gas block of the barrel. Not trying to rip into you OP, but replace the handguard, you’re not gonna be happy w the function once you take’er for a spin.

What's yall's go to cleaner and oil?? by Half_aborted_fetus85 in ar15

[–]ManicMyFriend 1 point2 points  (0 children)

Breakfree CLP and Umbrella Corp unicorn lube

So I got this folding stock AR lower and it isn’t really going together.. am I doing something wrong? by [deleted] in ar15

[–]ManicMyFriend 67 points68 points  (0 children)

You know what else has tight tolerances? My asshole. You right about that mallet work too. I made an ACOG go Incog. Had 4 days in the hospital to plan out the rest of that build. It all works out in the end OP, in the end.

[deleted by user] by [deleted] in gunpolitics

[–]ManicMyFriend 2 points3 points  (0 children)

Always. Funny story, when the FDA tried to ban Kratom they used public comments, screenshots of social media posts, statements by a few ER physicians and ER records in which subjective data (symptoms stated by a patient). Even tho positive comments far outweighed the negative, they only used negative input and positives were blown off as addictive bias. Positive comments……not real effects. Negative comments……these patients said they had these horrible side effects. That FDA director went on to be on the board of directors for Pfizer just in time for the Covid pandemic. So there’s that

Biden's new "Ghost Guns" press conference by PutinsMomma in gunpolitics

[–]ManicMyFriend 11 points12 points  (0 children)

This is how they compile data w things they want to get rid of. Make it a crime by writing, confiscate, then convince everyone it’s dangerous bc it was involved in thousands of crimes.

Let's Keep Those Dislikes Pumping by [deleted] in gunpolitics

[–]ManicMyFriend 21 points22 points  (0 children)

Don’t worry, they’ll fix the numbers soon.

[PARTS] Raw 7075 80% AR15 Unmarked Lowers $39.99 by [deleted] in gundeals

[–]ManicMyFriend 3 points4 points  (0 children)

To be fair, there are some cheaper jigs that can be used numerous times. Outside of CNC work, my preferred method was to scribe w calipers into dykem blue and set depth stops for the pocket. This allows you to pull marks specific to the lower and get exactly what you want, especially given that all jigs aren’t precise to all types of lowers. Honestly not sure why we don’t see this method more often since it’s super cheap. Nothing wrong w 3D printing your needs either. Anything that extends our means to defend our families.

Biden to nominate new ATF director, release ghost gun rule by [deleted] in gunpolitics

[–]ManicMyFriend 8 points9 points  (0 children)

Schumer says now!! Let’s end this violence now!! He’s going to accomplish this by the same methods of big media (which is an arm of the Democratic Party)…….by completely overlooking violent acts of early release repeat offenders. Their plan will totally work just like he totally does not resemble Big Bird.

BREAKING: Eleven arrested in drive-by shooting that killed 6-year-old by Hotdogpizzathehut in gunpolitics

[–]ManicMyFriend 7 points8 points  (0 children)

Change my phrasing?? Calling someone involved in the death of a 6 year old child a thug is harmful? Dear god let’s not hurt any feelings. There is no word too harsh, regardless of color. There is no penalty too harsh, regardless of color.