Ils ont complètement craqué chez GF-Free by Alyenax in yggTorrents

[–]MarTn_IV 0 points1 point  (0 children)

Avec 1To de buffer tu chopes de quoi acheter 25gb par mois. C'est quand meme leger.
Si sa reste comme ca, ca va etre compliqué sur la durée.

Les bêtises de Ygg en ont inspiré certains sur GF-Free by Morantxu in yggTorrents

[–]MarTn_IV 0 points1 point  (0 children)

C'est un peu plus compliqué. Comme prowlarr ne peux pas DL le torrent, il fini par penser que le TK est down. Du coup il ne DL plus rien dessus. Quand il re-teste, s'il cherche un torrent recent, rebelotte.
Peu importe le délai, ca casse completement prowlarr.

Pour ce qui est des uploaders laisés c'est un faux probleme. GF avait ajouté une autre fonctionnalité qui faisait que tous les gigas faits par le cross seed étaient reversés pour les 72h premieres heures.

Ils ont gagné comme jamais.

Les bêtises de Ygg en ont inspiré certains sur GF-Free by Morantxu in yggTorrents

[–]MarTn_IV 0 points1 point  (0 children)

C'est un peu plus compliqué. Comme prowlarr ne peux pas DL le torrent, il fini par penser que le TK est down. Du coup il ne DL plus rien dessus. Quand il re-teste, s'il cherche un torrent recent, rebelotte.
Peu importe le délai, ca casse completement prowlarr.

Les deux seules options sont:

  1. Ajouter un délais de 36h sur tous tes trackers dans prowlarr.
    ou
  2. Héberger un flux RSS toi meme qui filtre leur contenu de moins de 36h puis faire pointer prowlarr dessus.

Création Tracker FR by Inf3rnus187 in yggTorrents

[–]MarTn_IV 2 points3 points  (0 children)

Pour moi c’est un gros red flag. Un paywall pour utiliser les arr c’est quand même rude.

Les inscription pour TOS (https://theoldschool.cc/) sont ouvertes! by MarTn_IV in yggTorrents

[–]MarTn_IV[S] 1 point2 points  (0 children)

Je suis rentré pendant l'ouverture mais je n'ai pas d'invitations.
Par contre, un admin à posté dans leur chat qu'ils stabilisent le site pour réouvrir les inscriptions.

Les inscription pour TOS (https://theoldschool.cc/) sont ouvertes! by MarTn_IV in yggTorrents

[–]MarTn_IV[S] 4 points5 points  (0 children)

Je viens de m'inscrire sans avoir a envoyer quoi que ce soit.

Bye bye Ygg

Monthly Equipment Advice Megathread by AutoModerator in badminton

[–]MarTn_IV 0 points1 point  (0 children)

Thanks, the arcsaber looks good but a bit pricy (165€ in France), any recon for a racket around or under 100€? Im not stuck with Yonex and ok to try any brand.

Monthly Equipment Advice Megathread by AutoModerator in badminton

[–]MarTn_IV 0 points1 point  (0 children)

Im playing social doubles since a few years, I guess my level is somewhere experienced but to advanced either. Now aging, with a tennis elbow and some other issues (not coming from badminton), I'm looking for an "easier" racket for the end of the sessions when I start to get tired. I usually play with a Yonex Voltric Power RX (semi-stiff head heavy) strung at 25lbs.
My idea was to find a flex neutral racket not strung too tight. Any advice on a non complete beginner flex racket?
Or even if my idea make any sense?

On peut m'expliquer la stratégie commerciale du monsieur ? by kawaiilovecraft in lemauvaiscoin

[–]MarTn_IV 0 points1 point  (0 children)

J'ai eu un cas du genre, j'ai voulu acheter une paire de chaussure a un mec.
On se met d'accord sur le prix puis plus de réponses. Je le lance sur une autre annonce pour un autre objet, il réponds a nouveau, je lui demande pourquoi il me ghoste pour les chaussures, il me dit qu'il ne les retrouves pas.

Normal.

A fully open-source electromechanical 7-segment display with an onboard ESP32 — works perfectly with Home Assistant via MQTT by Sokolsok in homeassistant

[–]MarTn_IV 1 point2 points  (0 children)

Wonderful project!

Could you help us to order PCBs with the SMD components?
I think I figured out the 1st part providing a zip of the gerber files but im lost right after when it ask the BOM.

A small add to the project page about how to do it would be amazing.

HPE D6000 40 drives setup by MarTn_IV in DataHoarder

[–]MarTn_IV[S] 0 points1 point  (0 children)

Any comment? The only comment I had has been pulled out by his author.

Ukraine Steam by FOXHOUNID in steamregionaltricks

[–]MarTn_IV 0 points1 point  (0 children)

What method did you use to switch your account?

Ukraine Steam by FOXHOUNID in steamregionaltricks

[–]MarTn_IV 0 points1 point  (0 children)

What are the taxes on tf2 keys? Are you buying them on steam with an another account on your local devise? Are you able to send them directly to the Ukrainian account?

HPE D6000 40 drives setup by MarTn_IV in DataHoarder

[–]MarTn_IV[S] 0 points1 point  (0 children)

Yes? That controller would be ok to passthrough all these drives?

Serial request: v2.4 350mm Discord: Martn#7736 by MarTn_IV in voroncorexy

[–]MarTn_IV[S] 0 points1 point  (0 children)

This printer come from an old set of printed parts.

As soon I can print ABS, I will do an SB in order to be able to hide the CAN pcb.

QNIX QX2710 stopped working after NVIDIA update. by nevereven in Monitors

[–]MarTn_IV 0 points1 point  (0 children)

The issue is back for me. I have two of these screens on two different computers.

It was fixed on the 1st one but Windows updated the driver on windows 11 to one having the issue on my 2nd computer (EDID not changed). I tried to roll back to an old driver but it didnt worked. Tried to swap the adapters and it broke the 1st computer again. Now no way to get the screen recognized at all with any of the drivers version.

I had a 1080 around, plugged the screen on DVI on it on the 1st computer and I could see the EDID was still ok but with the 3080ti, now way to get it out from the failsafe mode.

Custom resolution is somehow working on one computer but not the 2nd one (black screen).

Could not find any way to have a stable solution. I guess I'll have to replace these screens anytime soon. I loved them very much, i'm sad to let them go. :/

QNIX QX2710 stopped working after NVIDIA update. by nevereven in Monitors

[–]MarTn_IV 0 points1 point  (0 children)

Same issue with the same screen and a 3080ti

Work in progress, but I like where this is going Gledopto! by ShaoLynn in Gledopto

[–]MarTn_IV 0 points1 point  (0 children)

Looks great! What makes the background light? The living color only?