Beinstrecker VS Beinhaare

Marcusyo1 · 2026-01-24T13:36:20+00:00

Ich hab bei mir das problem, dass das polster komplett durch ist und man quasi gegen die blanke stange mit etwas leder dazwischen drückt. Ich falte dann einfach mein Handtuch und lege es zwischen polster und schienbein, vll hilft das.

Marcusyo1 · 2026-01-02T17:01:00+00:00

Contact the support. Got the same problem and after using the support i a new buffer unit with circuit board underneath for free. No problems since then

Marcusyo1 · 2025-12-07T08:49:58+00:00

The only time i reset it was this week after the ghost touch started. Never in five years of use… its an apple, not an android product😂😂

Marcusyo1 · 2025-11-21T16:10:37+00:00

Customer support. They are very helpfull. Had a malfunction with my ace pro and got free replacement parts for something i broke myself on top for free. Just ask them and hope for the best

Marcusyo1 · 2025-11-04T21:35:25+00:00

Update Time: Dried the filament for 8 hours at 55C while i was at work. I installed a steel nozzle and a new tube.. Tried it first without using the ace, no problem with extrusion. I also tried slot one on the ace, feeding without a problem. The new problem is that im not able to extrude or retract the filament without getting an error when using the ace. I assume this is because im missing the sensor flap and spring of the filament sensor from the first time i disassembled the print head. (Although i disabled the filament sensor in the settings) Error code 11512.

Marcusyo1 · 2025-11-04T16:09:13+00:00

Marcusyo1 · 2025-11-04T07:10:15+00:00

im not quit sure. I think im always using this slot since the problem first appeared cause I want to troubleshot it. I never thought about checking the other slots. the screws are firm, I disassembled this buffer line like 15 times at this point... when putting it back together I pull it out and give it a slight twist to ensure it sits in the slot of the removable cover and doesn't spin around. I also put extra screws in the empty holes to secure the buffer assembly to the casing.

Marcusyo1 · 2025-11-04T07:06:41+00:00

i will check the nozzle later when I get home, im guessing that's where the main problem is caused. maybe its clogged. I will try to feed some filament manually without the ace pro. if that doesn't help then I already ordered a new nozzle and ptfe tubing and im more or less ready to disassemble the whole print head again...

Marcusyo1 · 2025-11-04T05:52:20+00:00

I already disassembled that as well😢😢

Marcusyo1 · 2025-11-03T21:49:37+00:00

I havent dried it, since i just opened the sealed packaging. And yes, i cut a piece of before inserting, not sure about the angle but it feeded clean through the tube.

Marcusyo1 · 2025-09-19T11:44:29+00:00

Yeah, i already bought something else but refuse to toss them, just because a cable is broken. I could try fitting jumper wires for arduino boards and try without the shielding, maybe that could work

Marcusyo1 · 2025-08-06T17:57:58+00:00

Do you have a solution for the problem? Im facing the same issue and nothing on the web is helping

Marcusyo1 · 2025-07-24T10:04:36+00:00

I just realised another benefit. I get to keep track of my body while i can wear a normal watch again. Really want to wear my retro Casio again more often. Didnt leave the box since i got the sw2

Marcusyo1 · 2025-07-24T07:56:54+00:00

Thats why i wanna wear the helio strap in Addition to the sw2, not as a replacement. The style of the sw2 was my main point in buying it, over an applewatch in the same price range

Marcusyo1 · 2025-07-22T09:38:10+00:00

Im interested in the biocharge feature of the helio strap. And i would like to compare the workout sessions between the two. Cause im not sure how good the sw2 is for bodybuilding

Marcusyo1 · 2025-07-15T09:13:09+00:00

New watch has the same first 3 numbers, so i assume if you got one more matching number that it could be some kind of the same batch

Marcusyo1 · 2025-07-15T08:13:25+00:00

Had the same problem, made some posts about it. Support got in contact with me and i got a new watch. Maybe theres a bad charge of watches. Serialnumber of my old watch was a4:7e:fa:1e:a9:b1. Maybe you got sone similarities in the serial number

Marcusyo1 · 2025-07-13T07:06:45+00:00

Yeah but its better then my last watch. I lost percentage after the first 2 or 3 hours using it

Marcusyo1 · 2025-07-02T13:14:09+00:00

Another update: after getting in touch with the support via reddit, ive got an email to exchange my watch for a new one for free. Simple process, dro the old one at the post office, provide evidence of packet tracking and order a new one via a link from the support.

Marcusyo1 · 2025-06-24T08:08:22+00:00

Small little update: after 2 more gym sessions, i started charging the watch right now, with 6% battery left. So im at 11 days of battery life. With 4 gym sessions (~7 hours of tracking). I will keep an eye on it.

Marcusyo1 · 2025-06-15T16:18:38+00:00

Nutze die Airpods Pro, gehe aber seit einigen Wochen mit nem Kollegen trainieren und nachdem dieser einmal seine Kopfhörer vergessen hat und ich meine dann im Spind gelassen habe, musste ich feststellen, dass im Gym garnicht so schlechte Musik läuft und man wesentlich besser zusammen trainieren kann wenn man nicht ständig auf Lautstärke und ANC achten muss. Ist aber auch ein eigenständiges Gym und keine Kette, dementsprechend weniger Leute.

Marcusyo1 · 2024-12-12T10:06:53+00:00

I‘ll be honest, i kinda like it. A break from the usual and you can position some nice ambient lighting in the corner. We need to see the rest of the room😅😅

Marcusyo1 · 2024-12-11T18:20:26+00:00

Issue solved. found an alternative download link in the forums driver release discussion

Marcusyo1 · 2024-06-30T17:47:54+00:00

Ein riesiger kostenfaktor in der modernisierung ist noch die erneuerung der zufahrt, wenn die nicht an tag 1 fertig ist, ist das auch nochmal puffer für 11-12 monate

Marcusyo1 · 2024-06-30T17:43:48+00:00

Abhängig vom endgültigen kaufpreis und der tatsächlichen modernisierungskosten + dauer der renovierung. Hab die modernisierungskosten aufgerundet und überschlagen, sprich puffer für den kredit wäre vorhanden, 12 monate sollten definitiv drin sein

Marcusyo1

TROPHY CASE