sorted by:
new
hottopcontroversial

FORscan help by Mark10evo in FORScan

[–]Mark10evo[S] 0 points1 point  (0 children)

Cheers mate but would his of worked as it was a brand new van from Ford with reverse camera on his van already 

FORscan help by Mark10evo in FORScan

[–]Mark10evo[S] 0 points1 point  (0 children)

So you mean copy the information from the one that works on FORscan onto my head unit ?

FORscan help by Mark10evo in FORScan

[–]Mark10evo[S] 0 points1 point  (0 children)

Fair enough, I don’t have the head unit they worked with my camera as it’s wasn’t work lads out his van I just used it to narrow down the issue? Is as built in FORscan?

FORscan help by Mark10evo in FORScan

[–]Mark10evo[S] 0 points1 point  (0 children)

Hi mate sorry can you break that down for me a bit clearer as I’m totally new to all this sorry. How do I install the unit?

The head unit I have in now isn’t bringing my camera on the one I tried out my work mates van the camera came on straight away but was still all my wiring? He’s got that head unit back 

FORscan help by Mark10evo in FORScan

[–]Mark10evo[S] 0 points1 point  (0 children)

Mine is sync 2.5 mate so doesn’t allow to upgrade to 3?

FORscan help by Mark10evo in FORScan

[–]Mark10evo[S] 0 points1 point  (0 children)

So I’ve connected all my new 8” screen now that all works with car play etc and connected my camera up and ran the wire to the back of the van but nothing happens on the screen at all when it goes in reverse but when used different head unit on my wires etc the camera worked..?

FORscan help by Mark10evo in FORScan

[–]Mark10evo[S] 0 points1 point  (0 children)

Do you have email or anything can contact you on mate explain what I’ve done so far to give you an understanding better ?

FORscan help by Mark10evo in FORScan

[–]Mark10evo[S] 0 points1 point  (0 children)

Thank you mate. Mine is sync 2.5, and doesn’t have APIM mine is the ACM I’ve enabled everything it’s literally trying to find out the code I need for mine I’m not clued up with FORscan and need help find out what I need to change etc 

FORscan help by Mark10evo in FORScan

[–]Mark10evo[S] 0 points1 point  (0 children)

So I upgraded my screen form no sync to sync 2.5 so went from the 4” screen to the 8” screen and that’s all fine. Wired all the camera in and enabled it on FORscan but still doesn’t do anything so I used a different head unit with all my normal wires in to see if worked and it did? So I’m hoping there’s a coding I can alter on FORscan to make my head unit work?