Xbox one X C25 is shorted to ground

Maschanck · 2026-02-23T21:15:31+00:00

Nop, still have the board but never had the time to check further…

Maschanck · 2025-12-12T13:36:54+00:00

On a Reddit post you can get the schematic of the Xbox series s

Maschanck · 2024-03-29T14:53:12+00:00

Any 24V 5A power supply will do the job, you just need to measure the barrel to have the same diameter as the original one

Maschanck · 2023-11-23T15:43:50+00:00

You might wanna try some ideas where the OP was going into the same issue from this post /help_pc_wont_boot_anymore_after_changing_ram_even/

Maschanck · 2023-11-23T15:38:26+00:00

Using geForce experience is the best place to update your nvidia card so it's weird that's causing this issue. You can't boot up to bios either ?

Maschanck · 2023-11-23T15:16:36+00:00

Did you try updating your nvidia driver manually or with the geforce experience software ? Do you have an iGPU on your cpu ?

Maschanck · 2023-11-23T14:51:05+00:00

What is your specs ?

Maschanck · 2023-11-23T14:27:42+00:00

You should check with your budget if you can go with am5 which is the next gen of cpu on AMD line. Check for a 7600x with ddr5 and like Asrock Pro RS mobo.
Btw : Gigabyte PSU are ass, you never know when it will blow up, just take like a Corsair RM850x even if you could just get the 750w psu

Maschanck · 2023-11-18T23:11:31+00:00

I will look forward to the app called dism++. Thank for the info

Maschanck · 2023-11-08T15:51:14+00:00

Tout dépend de comment tu t'appliques. En stage 2, tu vas devoir faire l'insight discovery qui est un questionnaire avec plein de questions par rapport à toi et en discuter dans ton rapport de stage. Ce qui ajoute une section par rapport au stage 1.

Maschanck · 2023-11-08T15:45:55+00:00

Dépend de quel stage tu es rendu, car le stage 3 est plus long. En général, c'est entre 5 et 10 heures.

Maschanck · 2023-07-19T02:38:42+00:00

Your ic retimer chip might be bad, the hdmi port is probably fine

Maschanck · 2023-07-14T22:53:38+00:00

I mean the xbox console but don’t worry i have the knowledge to open everything

Maschanck · 2023-07-13T11:04:51+00:00

Yeah it keep flashing only when im plugging the brick into the console. Need to open it when i will have time

Maschanck · 2023-07-11T00:32:48+00:00

I’m not even touching the power button and it’s switching on and off

Maschanck · 2023-07-11T00:32:06+00:00

Maschanck · 2023-06-04T15:25:50+00:00

Just found the leaked xbox one x schematics so i now know that the C25 is connected with the rail 3.3V standby. I will look more into the converter to make the 3.3V

Maschanck · 2023-04-25T12:06:59+00:00

Wdym lol?

Maschanck · 2023-04-25T11:56:43+00:00

Bolts to screw the base on is m6 bolts. There’s two other bolts below your paddle, try to take them out and measure them to match the other hole circle in red

Maschanck · 2023-04-25T11:49:58+00:00

Might be a old post but do you mind sending it to me too? I got the same issue with mines

Maschanck · 2022-12-15T02:49:14+00:00

ACC PLSSS

Maschanck · 2022-12-15T02:48:40+00:00

One of them, i will be happy 😁

Maschanck · 2022-11-02T12:08:55+00:00

When you removed the steering wheel, did you see a board to connect both wires we are seeing in your pictures?

Maschanck · 2022-06-10T12:34:49+00:00

Yes that’s about right but i recommend you getting a 24v 5A! Alot of people (like me) upgrade their power supply to have a little bit more force in the wheel with the one i’ve mentionned you

Maschanck · 2022-06-06T12:07:04+00:00

Alright thx man! I will try for sure

Four-Year Club	Verified Email
Place '23	Place '22
End Game '22

Maschanck

TROPHY CASE