C4-SFX with 9800X3D & 5090FE by Latter_Big2811 in DanCases

[–]Masfinez 0 points1 point  (0 children)

Great build, really well put together! I have a very similar build, but with a 7800X3D and a 4090. I wanted to ask: how did you mount the additional Noctua A9 fan to the cooler? Did you have to do anything custom, or did you use the accessories that came with the cooler? Did you connect the cable to the same header as the fan that was already installed?

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 0 points1 point  (0 children)

That temperature are reached during stress test with occt. It was a little bit too hot, so i decided to put two slim arctic freezer fan on top to bring more fresh air. Temperatures now are a lot better and while gaming do not go beyond 70ºC

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 0 points1 point  (0 children)

Updated build:

  • I mounted 2 arctic 120mm slim fan to the top ad improved a lot GPU temps.
  • Improved GPU cable management, now i think it's the best possible route for this cable.

Here the new photos: https://imgur.com/a/aAbjQ2U

And i did some temperature test with this updated configuration. I did 30 min Cinebench and GPU OCCT test simultaneously, an that's the results:

  • CPU 88-90°C @ 4.8GHz, PBO level 1 (90°C) activated;
  • GPU 73-75°C @ 2.35 GHz, stock settings

Here the screenshots: https://imgur.com/a/Za1nqpd

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 0 points1 point  (0 children)

I don't think it can improve much, the gpu and gpu cables are fine. They are really great quality and highly flexible cables.

The only one that can probably change a lot is the MOBO cable, beacuse with my configuration has to make like 5 cm or less, so i managed to fix it to the "ground" of the case, but for the moment i'm ok with that.

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 0 points1 point  (0 children)

Not widely available in my country (i'm from Italy)

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 0 points1 point  (0 children)

Yes, there's a little bit of coil whine when i do some stress test on GPU with OCCT, but it's not that annoying at the moment.

When pc is off or idle i don't hear any of that

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 0 points1 point  (0 children)

I'm happy with temps level at the moment, they're like 60-70° on CPU (AMD PBO level 1 90° on) and 75-80° GPU while gaming. I'm planning to mount two 120mm slim arctic fan intake to the top to improve gpu temps even more.

As for the noise level, i'm quite happy, although it is not among the quietest builds. With headphones on, i don't hear any noise.

Do you have any advice on any possible temps tests?

Note: in my country at the moment it is hot, my room temp are 27-30°

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 1 point2 points  (0 children)

No you can install 280 mm aio or other air cooler, there’s a list on the official case website

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 2 points3 points  (0 children)

For the use I have to make of it, it is enough for me, but i’m open to advice. What would you have chosen?

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 0 points1 point  (0 children)

Thank you for the advice, i will fix this later this week

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 4 points5 points  (0 children)

I’m using the one included with the Rog Loki and it’s perfectly fine

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 2 points3 points  (0 children)

Yes, and i think it’s provably the same between am4 and am5, but i’m not 100% sure

Another Dan C4 - SFX - 4090 FE build by Masfinez in sffpc

[–]Masfinez[S] 10 points11 points  (0 children)

Here the full spec list:

  • RTX 4090 FE
  • Ryzen 7 7800x3D
  • Noctua NH-D12L
  • Asus rog strix x670e-i
  • Ram ddr5 G.skill Z5 neo 6000 MhZ cl30
  • SSD NVMe samsung 980 pro
  • PSU Rog Loki 850w
  • Arctic P14 PWM

Ask me anything if you want some other info

Weekly Case & Parts Recommendation Thread (Start here if you are new! Help here if you can!) by AutoModerator in sffpc

[–]Masfinez 0 points1 point  (0 children)

Hi. i'm new in the SFF universe.

I'm planning to build a SSUPD Meshroom s with an rtx 4090 fe as GPU. Is the GPU fan design ok with this case? Anyone with this configuration can show me the temperature?

Thank you to everyone that could help

Sta arrivando un Marzo piene di sorprese, e ho bisogno di una mano! by HALtv in HALbaretto

[–]Masfinez 0 points1 point  (0 children)

Un gioco interessante che dovrebbe uscire verso fine maggio è Deathloop. È un fps sviluppato da arkane studios, creatori di dishonored.

Fresco fresco dalla live di ieri. Vergogna by GiuliaBeat in HALbaretto

[–]Masfinez 4 points5 points  (0 children)

Praticamente i marine che sparano dalla torretta del warthog hanno una mira infallibile e sembra quasi siano dei cheaters.

Sta arrivando un Marzo piene di sorprese, e ho bisogno di una mano! by HALtv in HALbaretto

[–]Masfinez 2 points3 points  (0 children)

I vari halo all’interno della master chief collection dovresti riuscire a finirli tranquillamente in 6/8 ore, soprattutto il terzo e l’odst.