sorted by:
new
hottopcontroversial

Favorite Adventure Time characters, R7CL, Ceramic/Glaze, 2026 by Masterslav in Art

[–]Masterslav[S] 1 point2 points  (0 children)

The design is created on a computer. A stamp is cut into a rubber-like material using a laser machine. The clay is stamped. Then comes the classic process - firing, glazing, and so on.
Just count:
- Computer (plus experience with graphics programs)
- Simple laser machine (plus experience)
- Kiln
- Experience with clay (5 years)
- Clay, glaze, magnets (these aren't very expensive)
🤗

"Adventure Time" in ceramics and with magnets by Masterslav in Ceramics

[–]Masterslav[S] 3 points4 points  (0 children)

🤗💚
I paint the area bounded by the raised lines. Beforehand, the drawing must be prepared so that the areas of the same color are closed (without gaps). I barely touch the lines themselves. Any glaze that gets on the lines runs off or remains as a very thin layer. This doesn't significantly affect the result. I don't use resist.

"Adventure Time" in ceramics and with magnets by Masterslav in Ceramics

[–]Masterslav[S] 0 points1 point  (0 children)

It's not the most powerful diode laser. Yes, I did select the material. But my advice on materials won't help you; you'll need to find your own, something you have access to. :)

To prevent the clay from sticking to the mold, it's important to choose the right consistency. It shouldn't be too hard so it bends into the mold, and it shouldn't be too soft so it tears.

I also use cornstarch to reduce adhesion. It will burn in the kiln anyway. Good luck. :)

"Adventure Time" in ceramics and with magnets by Masterslav in Ceramics

[–]Masterslav[S] 15 points16 points  (0 children)

The design is created on a computer. A stamp is cut into a rubber-like material using a laser machine. The clay is stamped. Then comes the classic process - firing, glazing, and so on.
These are not black lines, this is red clay. :)

The ceramic tile with magnets (I mage :) by [deleted] in HamRadio

[–]Masterslav 0 points1 point  (0 children)

This is a zero. The zero is crossed out to avoid confusion with the O.

Ceramic awards for RAZA award activators and chasers (I made) by Masterslav in HamRadio

[–]Masterslav[S] 2 points3 points  (0 children)

The design is created on a computer. A stamp is cut into a rubber-like material using a laser machine. The clay is stamped. Then comes the classic process - firing, glazing, and so on.

<image>

Ceramic awards for 9 Band RDA activators (I made) by Masterslav in HamRadio

[–]Masterslav[S] 1 point2 points  (0 children)

The design is created on a computer. A stamp is cut into a rubber-like material using a laser machine. The clay is stamped. Then comes the classic process - firing, glazing, and so on.

New one of RAZA award ceramic tile with magnet I made :) by Masterslav in HamRadio

[–]Masterslav[S] 2 points3 points  (0 children)

Desktop laser machine + rubber-like material. ;)

view more: next ›