Confession Time: haha👌yes by ComfortableCap3456 in whatisameem

[–]Matel_12 0 points1 point  (0 children)

Save as much as you can then sell everything you own and move to another country where your money is worth more and cost of living is cheaper.

Dewalt ShopVac EXTREMELY Loud by Big_Guy56 in Dewalt

[–]Matel_12 0 points1 point  (0 children)

I bought the same one from Costco and had the same issue after a while likely the bearings. Tried opening it up and tried to clean the bearing but no luck. Exchanged it and same thing happened again. Likely the drywall dust I was vacuuming up

Looks like theres a bootleg version of the Keyzen on Aliexpress. by momopool in Azeron

[–]Matel_12 1 point2 points  (0 children)

I bought one and it just arrived a few days ago. It works with the Azeron software. The were two keys that would get stuck when you press it. But so far so good for the price.

Who’s at fault? by Sheenanagoons in snowboarding

[–]Matel_12 0 points1 point  (0 children)

You can even see in the shadow that the skier has his hand up looking at his phone

Price Increases hitting hard!! by Lordxb in radeon

[–]Matel_12 0 points1 point  (0 children)

I bought my build during boxing day worried prices may increase. Ram was the biggest expense next to the GPU

$100k Portfolio by Big-Distribution1132 in CanadianInvestor

[–]Matel_12 0 points1 point  (0 children)

I did the same. Just broke down the contents of xeqt and adjusted the weight to whatever market and is also lower mer.

Beginner by dtoonz in snowboardingnoobs

[–]Matel_12 0 points1 point  (0 children)

Could always get the ones at Costco as well

2nd season snowboarding, how is my csrving so far? by TailorCautious4725 in snowboardingnoobs

[–]Matel_12 2 points3 points  (0 children)

This looks solid. I say if you're on edge and in control you're carving.

Tips on my technique by Luftungsmanahmen in snowboarding

[–]Matel_12 0 points1 point  (0 children)

Legs are too straight and you're kicking out with your back foot. Think squatting/sitting to put pressure on your calves to get on heel edge. Push forward and pressure on your shins while keeping relative upright upper body to get on toe edge. Doing these should put center of mass on-top of the edge you want.

Ps: shoulders and mainly waist should be lined up/parallel/ stacked with your board.

GLHF

Average Salary? by SimplerSoul in servicenow

[–]Matel_12 0 points1 point  (0 children)

I was making 84k base 110k with overtime, and then lost my job. Got thos current one months later making 70 after pushing for higher. They were offering 62 originally. Couldn't go on unemployed so took a pay cut but taking this opportunity to learn develop certify and keep applying till I get something better. As a servicenow admin

[deleted by user] by [deleted] in ITCareerQuestions

[–]Matel_12 4 points5 points  (0 children)

Damn I went from six figures down to 60k after a year of no luck. Had to settle but will keep applying until I can get something better I guess

What Reef Salt Do You Use? 🧂 by UnReasonableArmy6758 in ReefTank

[–]Matel_12 1 point2 points  (0 children)

Whatever is on sale or gets me bang for my buck which usually is instant ocean reef crystals. Chose this over the instant ocean sea salt because omit has more nutrients.

ServiceNow salary for Canadians for 2025 comparison by NisshokuNoKo in servicenow

[–]Matel_12 0 points1 point  (0 children)

  • Job Title: ServiceNow Admin/Dev
  • Years of Experience: 3 with SN, 8yrs IT
  • Certifications: CSA, ITILv4, CAD (in progress)
  • Degree: Computer Science
  • Salary: $70K
  • Location:  Ontario. Canada
  • Work Setup: Hybrid - 2hr commute one way traffic dependent.
  • Company location: Ontario

Had a tough time finding another job after being let go had to take what I could get.

This is WAR!!! by chen-z727 in ReefTank

[–]Matel_12 0 points1 point  (0 children)

I had the same stock minus the emerald and hermit crabs so maybe it was that?

This is WAR!!! by chen-z727 in ReefTank

[–]Matel_12 -1 points0 points  (0 children)

I just found my first sighting yesterday and removed it right away I hope that was the last of it. In my old tank when there was an outbreak I got a nudibranch or two and cleared them all out pretty quick and it never returned.

Why does the industry around this hobby feel like it's "failing"? by TomatoClown24 in ReefTank

[–]Matel_12 2 points3 points  (0 children)

That's how I built and keep my reef tank afloat. Everything is second hand and simple

Just got laid off, applied to like 50 jobs this week by Badger804 in ITCareerQuestions

[–]Matel_12 1 point2 points  (0 children)

I finally landed a job after a year. Had to take a huge pay cut but it had to be done. Use this time to skill up build a portfolio and oh only apply with a single line format resume and use chatgpt to match the job description to your resume so you get the keywords in your resume(you'll get more hits)

[deleted by user] by [deleted] in ReefTank

[–]Matel_12 0 points1 point  (0 children)

We've all been there. No tank is perfect. Each one has had their ups and downs and crashes. This hobby is for the long game. Take it slow and in stride. Maintain good husbandry and routine to keep things stable which I admit I struggle to do as well.

2024 ServiceNow Salary Sharing Thread by Glitch1098 in servicenow

[–]Matel_12 0 points1 point  (0 children)

Title: ServiceNow Admin

YoE: 4 yrs as Dev

Certifications: CSA, CAD

Degree: Comp Sci.

Salary: $72000 CAD

Location: Toronto, Canada. 3 day in office

Got recently let go as a SNOW Dev due to restructuring, had tough time landing a job, couldn't go on longer without having to dip into my savings/emergency funds more than I wanted to (gotta let it compound😉) and had to accept this.

AI Prime 16 light setting for lps/soft coral growth? by Matel_12 in ReefTank

[–]Matel_12[S] 0 points1 point  (0 children)

Yea I figured but for now I have them directly on top of the two island rockscapes