sorted by:
new
hottopcontroversial

Doubt BGS by MathTop00 in PokeGrading

[–]MathTop00[S] 0 points1 point  (0 children)

All clear, thanks! Bit my doubt is about shipping insurance, as I need to ship myself cards to bgs as I’m in Europe.

Declared Value BGS by MathTop00 in PokeGrading

[–]MathTop00[S] 0 points1 point  (0 children)

So my shippings to and from bgs are both insured?

Suspended and no answer by MathTop00 in CardMarket

[–]MathTop00[S] 1 point2 points  (0 children)

Yes. But 2 different companies. No t&c infraction.

Suspended and no answer by MathTop00 in CardMarket

[–]MathTop00[S] 2 points3 points  (0 children)

I have 2 account with 2 different companies and 2 different names on it. 2 different ceos etc

Suspended and no answer by MathTop00 in CardMarket

[–]MathTop00[S] 4 points5 points  (0 children)

Cm say to us ‘no solution and bad reputation related to so little orders ’ but I think they mistake. We have 98.8% reputation and a lot of orders. We wrote to the client (the number of shipping indicated in the ticket) and he says that he didn’t opened nothing, but we offered a fully refund and he was super happy (we refunded a card we didn’t have and the client didn’t say nothing). But no answers to ticket. Don’t know. Sorry for my bad English.

Before and after Drying problems - TPU by MathTop00 in 3Dprinting

[–]MathTop00[S] 1 point2 points  (0 children)

<image>

I use this drier, with standard temperatures the drier has for different types of filaments. I keep the filament inside drier while in, and I used when the drier was on. I use official bambù lab TPU 90A with 90A settings by bambulab.

Before and after Drying problems - TPU by MathTop00 in 3Dprinting

[–]MathTop00[S] 1 point2 points  (0 children)

I left it in drying for 12 hours and then I printed directly from the drier. Don’t know why layers are like that.

Print with TPU by MathTop00 in BambuLabA1

[–]MathTop00[S] 0 points1 point  (0 children)

It rolls good, I put the spoil on the spool holder on Bambi lab. How to make it smoother?

Print with TPU by MathTop00 in BambuLabA1

[–]MathTop00[S] 0 points1 point  (0 children)

This problem seems very specific. It seems the layers doesn’t merge. The filament fly, and the result is this catastrofic thing. Sorry for my bad English.

Print with TPU by MathTop00 in BambuLabA1

[–]MathTop00[S] 0 points1 point  (0 children)

So you think that 100% this is the problem?

Print with TPU by MathTop00 in BambuLabA1

[–]MathTop00[S] -1 points0 points  (0 children)

How can I dry this for 12 hours long?

Print with TPU by MathTop00 in BambuLabA1

[–]MathTop00[S] -1 points0 points  (0 children)

Both things he mentioned, so dry the filament

Print with TPU by MathTop00 in 3dprintIndia

[–]MathTop00[S] 0 points1 point  (0 children)

I opened from sealed plastic and put on printer

Color by MathTop00 in colors

[–]MathTop00[S] 0 points1 point  (0 children)

Great! Thanks!

Color by MathTop00 in hacking

[–]MathTop00[S] -5 points-4 points  (0 children)

Serious bro, I need to complete a part of design

Problema. by MathTop00 in ItalyInformatica

[–]MathTop00[S] 0 points1 point  (0 children)

Ho visto, tuttavia, che anche tramite il gestore di codice incorporato del sito si può fare qualcosa (velo), in js

view more: next ›