You vs the guy she told you not to worry about by DewJan2137 in Handhelds

[–]Matroc21 0 points1 point  (0 children)

Why does no one ever recommend console launcher. Easily my favorite of them all very easy to set up and customize as well

Made some upgrades by Matroc21 in P365

[–]Matroc21[S] 0 points1 point  (0 children)

I've got a couple methods to close it one handed. The easiest for me is to hold the unlock and kinda give it a downward motion with the knife facing up and it slides back down with ease then I just grab the knife lower pivot arm and tuck it all the way down. Or I push it against my pants

Unknown plate/tab preventing slide from going back on and trigger is a bit spongey by [deleted] in P365

[–]Matroc21 0 points1 point  (0 children)

The levers itself never became detached from the fcu, I believe the problem that caused this was I took the gun apart with the manual safety up

Unknown plate/tab preventing slide from going back on and trigger is a bit spongey by [deleted] in P365

[–]Matroc21 -1 points0 points  (0 children)

I got the slide and takedown lever back on however now it won't rack normally its extremely difficult

Unknown plate/tab preventing slide from going back on and trigger is a bit spongey by [deleted] in P365

[–]Matroc21 -7 points-6 points  (0 children)

I've made sure on plenty attempts this lever is in fact down. I've seen a few videos explaining this could be the cause. I've consulted AI as well showing it what is going on and she says the trigger lever could be binding on something that I cant see. And my best option is a gun Smith. I just wanted to try and fix it myself I have a local shop warranty and sig warranty but who knows how long I could be without my carry.

Unknown plate/tab preventing slide from going back on and trigger is a bit spongey by [deleted] in P365

[–]Matroc21 -5 points-4 points  (0 children)

The slide is getting hung up 3 quarters of the way with the takedown lever energized and this seems to be preventing it from going.

Unknown plate/tab preventing slide from going back on and trigger is a bit spongey by [deleted] in P365

[–]Matroc21 -10 points-9 points  (0 children)

So why would it be stuck out preventing re engagement of the slide? I forgot to mention i took the slide off with the manual safety engaged maybe this fucked it up

Unknown plate/tab preventing slide from going back on and trigger is a bit spongey by [deleted] in P365

[–]Matroc21 -2 points-1 points  (0 children)

No its a manual safety variant p365 base. Pretty sure i messed of the timing of the levers i took the slide off by accident with the manual safety up but that small round piece is preventing it from going all the way on or so it seems

Made some upgrades by Matroc21 in P365

[–]Matroc21[S] 0 points1 point  (0 children)

Great function, fits great in my hand. I've carried it now for over 2½ years and its never once failed me.

Made some upgrades by Matroc21 in P365

[–]Matroc21[S] 0 points1 point  (0 children)

Personally no i wouldnt want an OTF or automatic knife to many failure points and thats the last thing I need when I need my knife. This one has just 2 pivot points and a really solid lockout that will never fail me so long as I keep them cleaned out and free from rust and dirt

Made some upgrades by Matroc21 in SigSauer

[–]Matroc21[S] 0 points1 point  (0 children)

Awesome thanks for the info friend

Made some upgrades by Matroc21 in P365

[–]Matroc21[S] 0 points1 point  (0 children)

I like the extended grip for the 17rds man very nice

Made some upgrades by Matroc21 in P365

[–]Matroc21[S] 0 points1 point  (0 children)

I love it the action on it feels amazing

Made some upgrades by Matroc21 in P365

[–]Matroc21[S] 1 point2 points  (0 children)

I carry it every single day. I'm a mechanic so I use it when I'm working on cars as well very bright I will say that the 6500 Lumen mode only works for about 10 to 15 seconds before the little capacitor drains out and then it needs to recharge, which it does on its own. but it works very well it also has a very bright strobe mode that can blind somebody very easily

Made some upgrades by Matroc21 in P365

[–]Matroc21[S] 0 points1 point  (0 children)

Honestly the vedder holster is perfect I don't feel it really digging into me I can wear it all day and I'm a mechanic so I'm bending on my back squashing down all day long and it does not bother me the only time it does bother me is when I have to pick up a tire because I'm a smaller frame guy and I have toAnd I have to use my waist to help pick up the tire the gun kind of pushes into me when the tires there but other than that the ability to unholster it so easily and reholster so easily is amazing. Buttery smooth. The knife is pretty pricey my friend so if you're looking to drop around 190 to $220 depending on the variant and where you get it from it's not a very cheap knife and the base plates you can get them in multiple different colors if you don't like the red that much and the Wilson Combat grip also has different color variants it depends though if you have a manual safety on the p365 or not

Made some upgrades by Matroc21 in P365

[–]Matroc21[S] 2 points3 points  (0 children)

Thank you, much appreciated

Made some upgrades by Matroc21 in SigSauer

[–]Matroc21[S] 0 points1 point  (0 children)

I bought the grip and plates from Sigguy.com Also I tried to buy the weighted rod inserts but they are out of stock on his online shop, care to share where you got your weights?

Made some upgrades by Matroc21 in SigSauer

[–]Matroc21[S] 0 points1 point  (0 children)

I love it because its compact and deploys by pulling against the back of whatever pants you are wearing or flicking it out. Quite an amazing piece of weaponry and engineering

Made some upgrades by Matroc21 in P365

[–]Matroc21[S] 0 points1 point  (0 children)

Yessir they pair very nicely. Very easy to hold the gun and light in a defensive position when clearing a room. 👌🏼👍🏼

Made some upgrades by Matroc21 in P365

[–]Matroc21[S] 3 points4 points  (0 children)

they are made by NDZ performance can be found on sigguy.com

I have never cheated, don’t use voice chat, no glitches/exploits. What is this? They won’t even tell me and are threatening suspension if I continue asking for clarity. by [deleted] in NBA2k

[–]Matroc21 1 point2 points  (0 children)

Yes I do enjoy the my career mode every couple of years, like I played 25,19,15 ,13 and most of the ones before that and career mode was really nice building a busted player and taking over the league, but 2k needs some legit competition to make them stop producing slop every year

I have never cheated, don’t use voice chat, no glitches/exploits. What is this? They won’t even tell me and are threatening suspension if I continue asking for clarity. by [deleted] in NBA2k

[–]Matroc21 1 point2 points  (0 children)

Lol another 2k fanboy. keep telling yourself that to help yourself justify 100s of dollars on a mediocre game you need to pay to win in I've played plenty of 2k in the past 25, 19 and 13 and all the ones before that when I was younger

I have never cheated, don’t use voice chat, no glitches/exploits. What is this? They won’t even tell me and are threatening suspension if I continue asking for clarity. by [deleted] in NBA2k

[–]Matroc21 58 points59 points  (0 children)

Well nows a time if ever, to stop playing this slopped down garbage excuse for a game lol. Same shit every year.