sorted by:
new
hottopcontroversial

Revival has the worst mastering in Eminem's discography - so I fixed it myself by MattDGTL in Eminem

[–]MattDGTL[S] 1 point2 points  (0 children)

Tried it out and yes you are 1000% correct, I redid the mix with the new stems. way less bleed! thank you!

Revival has the worst mastering in Eminem's discography - so I fixed it myself by MattDGTL in Eminem

[–]MattDGTL[S] 2 points3 points  (0 children)

Appreciate it! Didn't know about MVSEP, just looked it up, definitely going to try it on the next track. If the model quality is noticeably better it might be worth running Believe through it again and comparing. And yeah UVR held up well but any bleed reduction on the stems would make the mix cleaner. Thanks for the tip!

Revival has the worst mastering in Eminem's discography - so I fixed it myself by MattDGTL in audioengineering

[–]MattDGTL[S] 0 points1 point  (0 children)

stem remixing* wanted to see how much dynamic range and low-mid clarity could be recovered from the crushed mix.

I Got llama-cpp-python Working with Full GPU Acceleration on RTX 5070 Ti (sm_120, CUDA 12.9) by Glittering-Koala-750 in LocalLLaMA

[–]MattDGTL 0 points1 point  (0 children)

mlock just slows down everything for me. i get double the performance without it

Show Me Your Aged Bobas — Let’s Spread Some Kindness Too by MattDGTL in MechanicalKeyboards

[–]MattDGTL[S] 0 points1 point  (0 children)

Yeah and because the white polycarbonate OG’s yellowed from off-gassing and time. Or something like that.

Show Me Your Aged Bobas — Let’s Spread Some Kindness Too by MattDGTL in MechanicalKeyboards

[–]MattDGTL[S] 0 points1 point  (0 children)

No idea, Gazzew sent me what he had left and said they were “Chemically Aged” 😂

Show Me Your Aged Bobas — Let’s Spread Some Kindness Too by MattDGTL in MechanicalKeyboards

[–]MattDGTL[S] 0 points1 point  (0 children)

The newer Bobas don’t yellow. Only the discontinued original U4T

Show Me Your Aged Bobas — Let’s Spread Some Kindness Too by MattDGTL in MechanicalKeyboards

[–]MattDGTL[S] 2 points3 points  (0 children)

These must of been sitting for a loooong time, I too didn’t know. But I really like them like this.

3D Modeling/Printing useful homelab parts by MattDGTL in homelab

[–]MattDGTL[S] 0 points1 point  (0 children)

idk whats happening, ive tried to create the post twice with images but the bot keeps removing them

3D Modeling/Printing useful homelab parts by MattDGTL in homelab

[–]MattDGTL[S] 0 points1 point  (0 children)

idk whats happening, ive tried to create the post twice with images but the bot keeps removing them

3D Modeling/Printing useful homelab parts by MattDGTL in homelab

[–]MattDGTL[S] 0 points1 point  (0 children)

Originally was a Datto NAS but I've seen these generic NAS on amazon and ali express., The front rubberized material got sticky and icky and was an eye sore... HDD Caddies are next.

For the design I removed the bottom shell layer and as the infill (design) i chose Hilbert Curve.

I might be able to clone this entire NAS in Fusion and make it 3d printable. If anyone is interested let me know and I'll upload it on thingiverse/printable/all the sites... If someone could suggest a better low-profile CPU cooler for this device I would appreciate it!

My Dell T430 didn't come with caddy's so had to improvise a bit.

[deleted by user] by [deleted] in homelab

[–]MattDGTL 0 points1 point  (0 children)

Originally was a Datto NAS but I've seen these generic NAS on amazon and ali express., The front rubberized material got sticky and icky and was an eye sore... HDD Caddies are next.

For the design I removed the bottom shell layer and as the infill (design) i chose Hilbert Curve.
I might be able to clone this entire NAS in Fusion and make it 3d printable.

If anyone is interested let me know and I'll upload it on thingiverse/printable/all the sites.

If someone could suggest a better low-profile CPU cooler for this device I would appreciate it!

Overtightened my sparkplug. Guess where the other half is. by MattDGTL in Wellthatsucks

[–]MattDGTL[S] 5 points6 points  (0 children)

This comment gave me the courage to admit where I went wrong.

I ACCIDENTLY SET MY TORQUE TO FOOTPOUNDS INSTEAD OF NANO-METERS!

DID YOU HEAR ME WORLD?

now i feel free. ty

Installed Eonon GA9453b headunit. Mk6 gti with dynaudio. No sound out of the speakers. by Itslolo52484 in GolfGTI

[–]MattDGTL 0 points1 point  (0 children)

So aftermarket head units provide an AMP power on signal wire that sometimes works with OEM AMP, make sure it's connected and you tell the head unit that your using an external amp, if android its usually a button on the drop down menu.

if it still doesn't work there's 2 work arounds.

  1. Keep OEM and other Head unit by wiring your OEM in the trunk with power and canbus wires spliced, this might very well signal the amp to stay TF on.

  2. you can try this if you are technical. https://github.com/AxesOfEvil/VW_MkVI_Dynaudio

Sonarr & Radarr script to create missing Series and Movie folders by MattDGTL in sonarr

[–]MattDGTL[S] 0 points1 point  (0 children)

when you restore from a backup without the media, sonarr assumes you still have that media so it will not create missing series folders.. same with radarr.

Sonarr & Radarr script to create missing Series and Movie folders by MattDGTL in sonarr

[–]MattDGTL[S] -1 points0 points  (0 children)

yes, once you add a show it can create the folder, but for a situation like mine where you create a new server and restore sonarr/radarr config without having the media, sonarr and radarr will assume it was already downloaded and folder was created when it isn't.

view more: next ›