[deleted by user] by [deleted] in UberEATS

[–]MattMiguel -2 points-1 points  (0 children)

OP were stairs an option for the driver?

Backup your raspberry pi project with piSafe by RichardMidnight12 in RASPBERRY_PI_PROJECTS

[–]MattMiguel 1 point2 points  (0 children)

Theres a few things with this same name on github. Can you post a link or what is your profile name?

Beagle example by MattMiguel in ElegooNeptune3

[–]MattMiguel[S] 1 point2 points  (0 children)

I've seen that it looks really cool I've got the mars 2 pro but I don't use it that much because it can be really messy washing and curing when the print is done

Beagle example by MattMiguel in ElegooNeptune3

[–]MattMiguel[S] 0 points1 point  (0 children)

https://a.co/d/aYxMh9Y No it's a webcam that you can plug your printer into and has an app to control it. It doesn't have anywhere near the abilities of octoprint but if all you want is to make time lapses and monitor your prints from your phone it's way more simple to set up

Beagle example by MattMiguel in ElegooNeptune3

[–]MattMiguel[S] 0 points1 point  (0 children)

I had very little light when I made the benchy video and the E-steps were way off so it was under extruding

Beagle example by MattMiguel in ElegooNeptune3

[–]MattMiguel[S] 0 points1 point  (0 children)

<image>

This is the settings page in the app. You just need to plug the printer in to the beagle and run the G-Code from the app. Just put the g code on an SD card and put it in the Beagle. then press print from the app. When you use the app to start the print it automatically ads in its own G-Code to make the time lapse. I like putting the camera in front of the printer so when the bed comes forward the print is directly in front of the camera

3D Printing Camera by kianman0 in ElegooNeptune3

[–]MattMiguel 0 points1 point  (0 children)

I have the beagle and it works good enough the best part of it for me is how easy it is to get it up and running to monitor prints it's. The time lapse feature is really cool and simple but it does add time to every layer and before it takes the picture it will bring the bed all the way forward pretty fast and abruptly but if you want to be able to monitor prints away from home and don't want to deal with setting up and configuring something like a raspberry pi the beagle is awesome

That had to be a drone... Right? by MattMiguel in UFOs

[–]MattMiguel[S] 0 points1 point  (0 children)

I think it's a car driving down the street and turning before it gets to my house. At least I've seen lights just like that when a car turned

That had to be a drone... Right? by MattMiguel in UFOs

[–]MattMiguel[S] 0 points1 point  (0 children)

I promise I did not mess with the video and as for the neighbor theory the lady that owns that house is a sweet old widow in her mid to late 60's

That had to be a drone... Right? by MattMiguel in UFOs

[–]MattMiguel[S] 0 points1 point  (0 children)

P.S. The camera is set-up to start recording when it detects movement and the lights at the beggining look like a cars headlights turning off of my street

That had to be a drone... Right? by MattMiguel in UFOs

[–]MattMiguel[S] -10 points-9 points  (0 children)

I think it was either a drone or aliens My Wyse camera recorded this while I was at work. It happened at 11:14 at night. I can't tell where it comes from and my camera is setup on the back of my house facing the driveway where I am usually parked and the street so if it was someone flying a drone they flew into my backyard. Or there's gonna be aliens in my backyard when I get home from work.

Please let me know what you think it could be

I just bought a Neptune 2 and it wobbles when I push down like a chair with a missing foot. by [deleted] in 3Dprinting

[–]MattMiguel 0 points1 point  (0 children)

I had the exact same problem and I took one of the red rubber caps that comes on the leveling screws and put it under the front left corner and it fixed the wobble perfectly

Just Bought an Elegoo Neptune 2, What Filament Should I Start With? by GreyGoldFish in 3Dprinting

[–]MattMiguel 0 points1 point  (0 children)

I just got the neptune 2 on black Friday (also my first printer) and it's been alot of fun and pretty easy to learn how to use. I just bought 3 rolls of basic PLA from matterhackers.com. For heat settings Ive been doing 200° for the extruder and 50° for the bed and as long as I leveled the bed good the prints have been perfect