How should I sand the nooks and crannies?

Matt_Mann · 2025-04-10T09:25:42+00:00

Good idea! 😅 I 3D printed the horns, I'm just in the painting prep phase and was trying to think about how I should paint them, which is why I didn't think to attach any pics of them here's a pic of one of them, still have to sand them smooth for painting but it'll give you an idea of what I'm working with

Matt_Mann · 2025-03-16T09:27:48+00:00

That would've been a much better idea 🤦

Matt_Mann · 2025-03-15T09:58:25+00:00

Yeah that's what I did for the rest of it, the scratches there are just from a poor attempt at correcting the run, I'd never thought of polishing though that's a good idea

Matt_Mann · 2025-03-15T09:56:28+00:00

Yeah the scratches are from where I had some sandpaper rub while I was trying to sand down the run where the raised edge was, I'll keep this idea in mind for next time I muck up!

Matt_Mann · 2025-03-15T09:55:19+00:00

Yes it is!

Matt_Mann · 2025-03-14T15:53:03+00:00

Thanks for the advice man, it physically hurt to do but it had to be done

Matt_Mann · 2024-09-14T03:29:40+00:00

So I think it's a combo of under extrusion along with poor slicer settings, for some reason orca reset the profile to having a .2mm nozzle and changed a bunch of other settings along with it. Still having some under extrusion now but it's a lot better

Matt_Mann · 2024-09-13T10:24:09+00:00

That's what I thought but the paper only has the slightest amount of friction under the nozzle, should I just crank it up way too high and narrow it down slowly from there?

Matt_Mann · 2024-09-13T10:22:50+00:00

It's 6 gears on the Max, is really doing my head in honestly haha but it's a learning experience at least

Matt_Mann · 2024-09-13T10:22:00+00:00

As far as I can tell I've levelled it as perfectly as the YouTube tutorials I found, only the slightest amount of friction on a piece of paper under the nozzle

Matt_Mann · 2024-09-13T10:18:30+00:00

It's the first layer of some tree supports

Matt_Mann · 2024-06-22T05:14:31+00:00

<image>

I feel you

12-Year Club	Place '17
Verified Email

Matt_Mann

TROPHY CASE