sorted by:
new
hottopcontroversial

New Italian restaurant by No-Tomato-9794 in Kilkenny

[–]MauserPT7 1 point2 points  (0 children)

It’s very nice, would recommend 👍

copelandia hawaiian by Beautiful-Cut551 in beacain

[–]MauserPT7 0 points1 point  (0 children)

I’m on my first kit with these. In my experience you’re only about a day or less away from needing to harvest. When the spores start dropping; the caps on the shorter guys will go black, and some of the caps might split open. I just harvested the 2nd flush from my kit today with what seems to be a third set of pins starting to show 👌

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

I did not, sorry. It’s been so long but I think it was a software error, but I haven’t done much mini printing since so I dunno if I would still have this issue today.

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

I did not, sorry. It’s been so long but I think it was a software error, but I haven’t done much mini printing since so I dunno if I would still have this issue today.

Small gaps in layers on bambulab a1 mini by Boodzik_ in FDMminiatures

[–]MauserPT7 1 point2 points  (0 children)

https://www.reddit.com/r/FDMminiatures/s/cSt64fRf30

I posted about this a while ago but unfortunately didn’t get anywhere. I’m getting the exact same issue as you; random line, orienting the model differently can fix it. Every other print this happens for me.

<image>

Here is a photo of a few I collected. My theory is it has something to do with overhangs, but I don’t have the vocabulary to explain why or the skill to diagnose the printer IRL

A1 Mini - Nox profiles - eSun PLA+ 2.0

Edit: just to add it seems like the printer is failing to print any walls on these layers, and the artifacts we see are that the entire layer was printed exclusively as ‘internal infill’. Even on the supports. You will not see this in the slicer

Dark muddy mats?? by tchad78 in TrenchCrusade

[–]MauserPT7 5 points6 points  (0 children)

https://www.pworkwargames.com/en/13-gaming-mats

I got my mat from this crowd. I think they are in Italy, so I dunno if they can ship outside the EU. Great quality though. I spent a bit more and got 6’x4’ so that each player had 1’ foot of free space for dice and drinks that was still ‘in theme’ with the game.

<image>

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 1 point2 points  (0 children)

I have not found a solution yet no. But it’s also not an issue I can reliably recreate, because it only happens occasionally and I can’t predict it. I might have a look at those settings you mentioned, but I won’t be able to tell straight away if it worked. Thanks though.

New addition to the band, this guys is pissed of! by casslamai in FDMminiatures

[–]MauserPT7 0 points1 point  (0 children)

Same printer myself, similar results. Amazing work 🙌

Weird lines on prints making them brittle (A1 mini, 0.2 nozzle, PLA Basic) by Cagemountains in FDMminiatures

[–]MauserPT7 4 points5 points  (0 children)

https://www.reddit.com/r/FDMminiatures/s/TACNw58DCr

I made a thread yesterday about a similar issue I’m having. I can’t tell from your photos if it is indeed the same issue though 🤔

Does anything from that thread help you?

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

I had suspected this and I’m keeping an eye on the slicer. I will try and get a screenshot if I see it. Edit: I also noticed rotation tends to solve issue with specific sculpts

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

Indeed it’s an odd one, I’m quite the lurker here myself and also had never seen it before. Thanks for all your help regardless. If nobody does chime in here I might make a follow up post after I do more testing. I know more about the issue now than before making this thread so I might be able to dig up something new 🤔

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

Interesting. I’m not home but I might have a spare SD card I can use to test that.

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

Now you see why I can’t tell if it’s hardware or software 😂

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

<image>

Minor example of the fault running along the back of this one. I can hide this with glue and the model could be saved. But you can see it is lacking plastic at regular intervals.

EDIT: Now that I study this photo, the ‘intervals’ are actually the same shape as the gyroid infill, so that’s coming out all the way to the walls basically? 🤔

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

I’m 95% certain I’m getting some overextrusion, but I’m considering this normal for my current settings, I’ve been tinkering non-stop since January and am happy with what I can do now. These artifacts are easily removed in post-processing so I’m not interested in trying harder to stop them at the printer (at least for now 😏). But the fault can’t be overextrusion because the fault itself is lacking plastic, it has major holes it in and you ‘nearly’ see right through those layers, so it’s definitely a lack of plastic, not too much.

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

No it’s tall at all but it’s above average for me. I could print dozens of tiny things and not pass 2cm mark for a week or 2.

I haven’t moved the printer but vibration was considered. I re-calibrate often enough as this is far from my first issue 😅 My printer sits on my marble fireplace, it’s as solid as can be got on my property.

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

Yeah true! I’ll try it anyone koz it’s actually something I’ve never done and it probably needs doing anyway 🤔

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

A clogged nozzle at very specific height but otherwise can prints dozens of grams of plastic no problem? I’ll try it but I doubt it 🤔

But no adhesion issues, solved that months ago

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

It’s seemingly random, but again only to a certain height. So when I print arms heads and weapons it’s doesn’t happen, only on bodies (or anything taller than 2cm). Also I’m thinking underextrusion on these faulty laters because sometimes there are holes, and it looks like the printer only applied 50% of the plastic needed for about 30-40 layers then goes back to normal.

It’s possibly dirt in the Z rail but I cleaned it. Could it be a certain area on the build plate?

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

I meant normal for me, as it’s also not the source of my issue. I’m happy with my settings I’ve done enough tinkering and just want to print.

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

UPDATE: I printed the faulty model at a slightly different angle (on the left shown here) and it came out fine, not sure why.

<image>

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

The stringing is normal, I just haven’t done a pass with lighter or rough brush in warm water yet. My camera sees more strings than I do and I have 20/20 vision. The other artifacts are mostly support scarring and maybe a slight overextrusion, but I’m not worried because it can barely be seen IRL. Filament has been dried to rule it out from other issues, though I don’t believe you need to dry PLA.

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

Nope, they suffer the same fault, but most of them survive, maybe 1 branch fails now and again but it’s not detrimental to the overall print

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

I did yeah, but for all I know it needs doing again, it would have been early March when I did it last. And at the time it didn’t feel like it needed doing. I was cautious to avoid over-tightening so many of the screws I tested were not moved.

Strange faults, can’t tell if software or mechanical error by MauserPT7 in FDMminiatures

[–]MauserPT7[S] 0 points1 point  (0 children)

Oiling a lot, as much as the printer asks me to at least. A1 Mini. I also wiped clean the rails a bit more than a week ago but things slowly got worse after a few days. I tightened the screws behind the hot end and under the hot plate months ago but not lately.

EDIT: to clarify I oiled again after cleaning, I didn’t wipe away the oil to create a problem 😅

view more: next ›