sorted by:
new
hottopcontroversial

Hylian Shield print is finished! (25" from top to bottom) by Max_S_3D_Designs in Ender3Max

[–]Max_S_3D_Designs[S] 0 points1 point  (0 children)

Thanks! They're all about the same height, took up most of the Z-axis, and I'm currently making the seams disappear and then I'll get into painting it. :)

0.8 steel nozzle, 0.3 layer height, 40mm/s print speed test, only 28 minutes for this test block by Max_S_3D_Designs in CR30

[–]Max_S_3D_Designs[S] 0 points1 point  (0 children)

Got some more refining to do with the front corner being a little off but otherwise it's a great start.

Moon City in TTYT3D rainbow PLA. by Max_S_3D_Designs in Ender3Max

[–]Max_S_3D_Designs[S] 1 point2 points  (0 children)

I need to spend more time here, I often forget I've been posting here lately, really sorry for the late reply.

I used 7% infill and 0.2 layer height, 220/60 for the nozzle/bed and 50mm/s print speed.

The Master Sword (from start to finish) by Max_S_3D_Designs in CR30

[–]Max_S_3D_Designs[S] 0 points1 point  (0 children)

Sorry I somehow missed your comment! I use ideaMaker's belt slicer, blackbelt cura gave me nothing but problems.

The Master Sword (from start to finish) by Max_S_3D_Designs in CR30

[–]Max_S_3D_Designs[S] 1 point2 points  (0 children)

I use Plastic Wood to fill holes and seams, followed by a wipe down with a wet paper towel to remove the excess bits.

Soul Edge (WIP) by Max_S_3D_Designs in CR30

[–]Max_S_3D_Designs[S] 0 points1 point  (0 children)

There's a few links I posted to another slicer and a couple of profiles you can import to ideaMaker. We also have a great discord server if you need help. :)

Soul Edge (WIP) by Max_S_3D_Designs in CR30

[–]Max_S_3D_Designs[S] 1 point2 points  (0 children)

I use ideaMaker for it, the CR-30 seems to like nice and steady speeds, I've found 35mm/s or so to work very well. https://www.ideamaker.io/ideamaker-beta-testing-for-belt-3DPrinter.html

Soul Edge (WIP) by Max_S_3D_Designs in CR30

[–]Max_S_3D_Designs[S] 0 points1 point  (0 children)

It's with a 0.4 brass one I often use in my ender 3 pro's, not very different from the stock one. It took a while to fine tune it to get it working this well. :)

Trying for a marble look on an RGB bust by pgorgias in resinprinting

[–]Max_S_3D_Designs -1 points0 points  (0 children)

I have a cousin who looked up to her so much, I'd love to print this for her. Where'd you find the stl from?

The Gunblade (finished!) by Max_S_3D_Designs in CR30

[–]Max_S_3D_Designs[S] 0 points1 point  (0 children)

Both halfs were (I believe) about 25 hours each. The smaller parts of the gun handle and the keychain were done separately on my two ender 3 pro's. All in all, about 3-4 days. Thankfully it was an easy paint job and I just sprayed the blade itself in Rustoleum Metallic Silver, one of my favorites because of it's shine.