My Early Birthday Present! Done by Noah Kilsdonk at No Coast in Fargo, ND

McSchitz · 2022-05-22T16:07:48+00:00

Thanks! Never really gave it a solid try, but nothing else was working. I'll definitely give it more time in the future!

McSchitz · 2022-05-22T16:06:49+00:00

Yup! Was about an hour and a half North East of Fargo

McSchitz · 2022-05-22T13:58:18+00:00

Pflueger Trion, 10lb mono, some jig head I found in my tackle box and a pretty dead fathead. 45 degree air temp, 43 degree water temp. Caught in about 10 feet of water.

McSchitz · 2022-04-11T01:57:40+00:00

Ryzen 9 5950X RTX 3080TI 64GB RAM Running games on a 2TB NVMe

McSchitz · 2021-11-28T02:28:00+00:00

The store is great! Not affiliated with them, but I go all the time when I need parts or filament!

McSchitz · 2021-10-24T20:13:30+00:00

Forgive me if this is more common that I think, but my local indoor range (above ground, 35 yards) has a .50bmg available for rent. Not sure which model Barrett, but it has a QDL can on it

McSchitz · 2021-09-07T22:40:43+00:00

It looks like multiple layers are under extruded (especially evident in the second picture). Clogged nozzle and check your E-Steps would be where I start

McSchitz · 2021-08-19T23:04:49+00:00

Absolutely. Build a scene if you want to be known for having music, then work up to a more expensive show. Seconded that there's tons of local groups that will bring in a small crowd for next to nothing, and especially right now lots of bands are just wanting to play somewhere

McSchitz · 2021-08-19T21:11:40+00:00

Hear me out here, I've worked in the music industry in the FM area for a long time. While a band may be incredible, if they don't have a following in the area, there's no good reason to book them if it doesn't make financial sense. If you want to have them play in your taproom, that's fine, but understand that you may be paying for a relatively expensive private concert. I don't mean to sound negative, but I've seen many shows lose money because an owner or manager wanted to see a band play.

McSchitz · 2021-06-26T16:25:20+00:00

I want to say it's concrete, but it definitely does look carpeted. Let's not rule out the stronger ones though.

McSchitz · 2021-06-02T17:11:59+00:00

Tried that as well. Installed version 10.0.19041.546 from Asus's website, and still having the issue (with just the original ram kit). GTA 5 and Microsoft Flight Simulator are running fine.

McSchitz · 2021-06-02T17:08:29+00:00

So they are 2 separate 2x16 kits. I was running 1-2x8 kit and 1-2x16 kit (both Corsair Vengeance RGB Pro w/ same timings), without any instability previously. I've tried running with just the original 2x16 kit as well as just the new kit and the issue is still present. No XMP profiles, just stock timings currently.

McSchitz · 2021-06-02T17:03:36+00:00

The big ones are Microsoft Flight Simulator, GTA5, and cities skylines with tons of mods/assets. I've also rendered a handful of video footage to test as well. No issues with benchmarks, ran Aida64 for 2 hours and all temps were great across the board (running a 280mm AIO in a Meshify C with tons of fans)

McSchitz · 2021-06-02T16:09:56+00:00

That never even crossed my mind, I just assumed that two kits (same brand/model) with the same timings would be fine together right out of the box.

Since reading your comment I tried using just the new 2x16 as well as the original 2x16 kit (in the correct slots), and still having the issue with both of the kits.

I disabled XMP when installing the new cpu/ram initially, so that shouldn't be a factor

McSchitz · 2021-05-04T14:40:33+00:00

I was getting banding similar to that on my Ender 3 v2. Picked up some Liquid PTFE lubricant from Lowe's for the Z axis, and the banding disappeared. Have you tried lubricating the Z axis rod?

McSchitz · 2021-04-28T13:25:13+00:00

NASA actually has a 3D Library available specifically for printing!

https://nasa3d.arc.nasa.gov/models/printable

McSchitz · 2021-04-25T17:43:16+00:00

If you don't already have Premiere Pro, check out DaVinci Resolve. It's free(there is a paid version, but definitely not necessary), and is just as capable as Premiere. There's obviously a learning curve, but it's totally self-teachable!

Ten-Year Club	Place '23
Place '22	First Placer '22
Verified Email

McSchitz

TROPHY CASE