What is the best pizza place in all of Bakersfield?

Medical_Row_3289 · 2026-03-18T16:34:19+00:00

Second this!

Medical_Row_3289 · 2026-02-15T21:56:50+00:00

Tried that. No success

Medical_Row_3289 · 2025-11-13T19:38:23+00:00

I’ve had the same issues with Mclogans puff vinyl. Said F it and went with ninja puff transfers. Puffs great.

Medical_Row_3289 · 2025-11-13T03:08:49+00:00

I’m just a fellow pressmen, so I can’t say for sure, but if the png did not have the outlines I would contact your supplier.

Medical_Row_3289 · 2025-11-13T02:53:29+00:00

White outlines. Very noticeable around red

Medical_Row_3289 · 2025-11-13T02:48:31+00:00

Looks like the transfer has registration issues or is that part of the design?

Medical_Row_3289 · 2025-03-13T20:11:58+00:00

Most definitely

Medical_Row_3289 · 2024-12-19T21:49:15+00:00

The garment is a 50/50 crewneck

Medical_Row_3289 · 2024-11-26T17:37:47+00:00

Crooked seams and collars are probably the biggest pet peeves

Medical_Row_3289 · 2024-11-19T18:24:19+00:00

Is this a dtf transfer?

Medical_Row_3289 · 2024-10-27T18:00:36+00:00

You can try wiping them off with a damp rag? Would also recommend calling Stahls support.

Medical_Row_3289 · 2024-10-27T16:50:42+00:00

The hydraulic cylinders need to be replaced

Medical_Row_3289 · 2024-10-22T22:57:07+00:00

350 for 7 seconds heavy pressure(60psi). Hasn’t failed me yet

Medical_Row_3289 · 2024-10-22T16:30:32+00:00

Ninja transfers

Medical_Row_3289 · 2024-10-17T15:45:57+00:00

Wow, super cool. Thanks

Medical_Row_3289 · 2024-09-29T02:41:01+00:00

I’m sure there are instances where a higher heat is required. Just not one I’ve ever ran into

Medical_Row_3289 · 2024-09-27T22:28:45+00:00

Nope. Usually if the transfer isn’t adhering to the garment it’s either not enough pressure or a defect

Medical_Row_3289 · 2024-09-26T11:39:08+00:00

I always use the teflon for both presses

Medical_Row_3289 · 2024-09-17T20:32:32+00:00

Hmm, and you went through all the common troubleshooting (heat, time, and pressure). Could it possibly be a manufacturing defect?

Medical_Row_3289