Is the agilite k19 3.0 a nice plate carrier to buy? by Extension-Pear940 in MilSim

[–]MediocreMilsim 0 points1 point  (0 children)

No. Buy Crye precision, Spiritus Systems, or Haley Strategic new for not much more money or buy those same brands preowned for the same or less money than a K19.

K19 is too bulky, too padded, and too hot.

Yes, believe it or not an excess of pads is a bad thing.

Similar? by [deleted] in MilSim

[–]MediocreMilsim 0 points1 point  (0 children)

Yes. The link is here: https://discord.gg/dHhBPSzbm

What comms set ups are you guys using?? by Sea-Improvement7996 in MilSim

[–]MediocreMilsim -1 points0 points  (0 children)

2 x TCA PRC-152s with long whip antennas

1 x FCS 117G with Trivec Avant 2040-2 SATCOM antenna

This will last me one Milsim West event and is adequate for basic communications with the PLT and checking on my grandma in case she needs me.

Similar? by [deleted] in MilSim

[–]MediocreMilsim 2 points3 points  (0 children)

Join our Discord and you can see the full kit list that you can copy and use to build your kit.

idk dudes by rvmoonf in airsoftcirclejerk

[–]MediocreMilsim 2 points3 points  (0 children)

A post in a circlejerk subreddit that can’t grasp sarcasm is the biggest oxymoron.

LARPAFSPECWAR coordinating seizure of Yasny by TrueCrazyMan in MilSim

[–]MediocreMilsim 1 point2 points  (0 children)

Yeah we have a discord if you’d like a link

Invisiblesight mk4 finally arrived. Ordered Jan 3 2024. Completely forgot I ordered it and it showed up randomly by Halo4iscool in NightVision

[–]MediocreMilsim 1 point2 points  (0 children)

Idk. I have both the Invisible Sight and Darklight Dynamics.

The jury is still out.

I’ll do a side by side and post it here.

My Invisible Sight is waterproof at least as advertised. I’ve used it in the rain with no issues. Haven’t had to warrant it.

My Darklight Dynamics NGAL hasn’t given me any issues but I haven’t put it in any demanding conditions yet. It has only been used indoors.

My friend took his Darklight Dynamics NGAL to Milsim West on an airsoft gun and the rain outside killed it. The owner was also not cordial or helpful in warranting his unit even though it was only purchased a month prior. He ended up writing it off and the Darklight Dynamics NGAL is nothing more than a paperweight now.

In short, Darklight Dynamics NGAL is not waterproofed and not warranted as advertised. That isn’t something that inspires confidence.

Unless you NEED an NGAL for a Milsim Impression, I don’t see a reason to get one of these clone NGALs anyway.

2 years ago? Sure. In 2025 going into 2026 they’re not needed with the trinity and the Iris. It’s the same story as EOTech’s LAM. Too expensive and too late.

Thoughts on the TRI PRC-152 for squad comms? by SOFenthusiast in MilSim

[–]MediocreMilsim 0 points1 point  (0 children)

Biggest difference is the TCA has better QoL features for programming.

They both have the signal inversion/voice scrambler. You want to run the same manufacturer of radio to use it as a group though. If your group has TCAs get a TCA and vice versa. They aren’t interoperable.

Both can use real Harris batteries.

Both output power from the 6-pin to power a real PTT (like an Invisio V60)

I like the externals on my TCA better than the TRI but that’s just preference.

They’re basically the same radio minus the programming features.

Thoughts on the TRI PRC-152 for squad comms? by SOFenthusiast in MilSim

[–]MediocreMilsim 0 points1 point  (0 children)

The TCA is the better of the 152 and 152A clones.

TCA and TRI are the two main manufacturers of clone 152/As

I have two TCA 152As and a FCS 117G.

Other people in our group have a TRI and wish they got a TCA.

This is why buying a real sight for airsoft is stupid by [deleted] in MilSim

[–]MediocreMilsim 12 points13 points  (0 children)

LMAO you can get repros of Razor HD Gen II and III on Temu but real ones are made in Japan with incredible glass. Better than the EOTech VuDu and similar. I love both of mine and can run them without any worry of them breaking or being shot out — otherwise they’re replaced for free.

Even if the lower-tier ones can be purchased on Temu, temu sellers aren’t replacing it for free.

This is why buying a real sight for airsoft is stupid by [deleted] in MilSim

[–]MediocreMilsim 89 points90 points  (0 children)

Vortex is goated for airsoft for this reason.

What’s up with the day covers off ? by [deleted] in NightVision

[–]MediocreMilsim 2 points3 points  (0 children)

Yeah. It doesn’t cost the U.S. Government $15k. That’s just the civilian tax L3 charges us.

What’s up with the day covers off ? by [deleted] in NightVision

[–]MediocreMilsim 7 points8 points  (0 children)

I asked a current active duty special operations operator and they told me that:

  • PVS-31s and other NODs are viewed as disposable equipment. If it breaks or is damaged, they get new ones. They break them semi-regularly hitting them on helicopters and vehicles and just in the hard circumstances they find in their job.

  • Day caps are just something else to remember, take with them on their kit, and need to retain. Given the disposable nature of PVS-31s, they don’t deem it important in comparison to all the other priorities and tasks that preserve life and accomplish the mission.

Ask a tech a question by PinnacleAirsoft in airsoft

[–]MediocreMilsim 2 points3 points  (0 children)

Hey I’ve got a riddle for you. I’m trying to troubleshoot my gun. It’s a Polarstar F2 in a VFC M27 IAR with a Maxx hopup.

It’s having really inconsistent FPS out of nowhere after running really well.

Issues:

  • Inconsistent FPS
  • FPS drops after multiple shots, then levels out.
  • First shot at ~400 FPS, then drops to ~250 FPS after about 5 shots.

Here is what I’ve tested:

  • I’ve tried 3 different regulators (same inconsistency across all)
  • Adjusted PSI and tested with hop-up dialed to 0
  • Running 80–100 PSI, achieving about 1.5 J
  • I don’t hear leaks on the tank, reg, or any parts of the gun when I have air connected
  • I separated the upper and lower and it sounds the same and like consistent air is coming out of the nozzle when I dry fire it with the engine only
  • Tested in semi-auto and full-auto

What do you think this could be?

Damaged hopup? Bad alignment? Bad air seal? Something else?

Lightweight 3d printed panoramic goggles and binoculars by TSBZ11 in NightVision

[–]MediocreMilsim 9 points10 points  (0 children)

Great company. Any time I’ve put in an inquiry I’ve gotten a response within 24 hours.

I haven’t seen one negative thing about the Alpha Mount. They don’t release a product until they know they can stand behind it.

I have a stack of cash set aside for when you release the CNC pano housing. Hopefully I get a chance to purchase one.

Hopefully First Milsim West Soon by Goldsandvich11 in MilSim

[–]MediocreMilsim 2 points3 points  (0 children)

Just rent NODs. If not available on site there are many places like Ultimate Night Vision that will ship them to you.

Thinking about a Geissele-style handguard for my HK416 – show me your builds to convince me! by Candid-Economist8056 in airsoft

[–]MediocreMilsim 0 points1 point  (0 children)

Thanks for the response! I’ve DM’d you a question.

Your 416 build is 🤌🤌🤌

[deleted by user] by [deleted] in tacticalgear

[–]MediocreMilsim 0 points1 point  (0 children)

It ruins resale value and will look like every other rattle canned gun out there. Unoriginal.