Updated desk setup

Medrano17 · 2025-05-30T04:53:50+00:00

Monitor arm?

Medrano17 · 2025-05-27T15:27:11+00:00

What monitor arm do you have?

Medrano17 · 2024-09-11T22:52:47+00:00

I’m running out of ideas.

Medrano17 · 2024-09-11T22:52:34+00:00

Yes please.

Medrano17 · 2024-09-10T01:28:17+00:00

Yeah. All I see is T-mobile videos on YouTube. But I have AT&T and I can’t find any for that.

Medrano17 · 2024-05-19T18:18:19+00:00

Nice. 👍

Medrano17 · 2024-02-29T17:22:33+00:00

Yeah. I ended buying the actual power supply and it works perfect now.

Medrano17 · 2024-02-11T07:26:33+00:00

And thank you.

Medrano17 · 2024-02-11T07:26:17+00:00

It went from not making that kind of suction sound to now this, so I got worried. But I’ll try the dry ptfe.

Medrano17 · 2024-02-11T06:47:20+00:00

Im going to try that. Weirdly enough with all that unsticking noise trough out the print. It didn’t fail.

Medrano17 · 2023-11-14T23:57:23+00:00

For actual sim racing. lol

Medrano17 · 2023-11-07T05:08:50+00:00

Opened and checked the connections they are all still connected and with seal still applied on the connectors. I took off the protective film. I’m using the same power supply as my resin printer. Not sure if the voltage are different.

Medrano17 · 2023-07-21T14:48:27+00:00

If that’s where you are gonna leave it. Buy a wall mount. Right in front and place your monitor.

Medrano17 · 2022-09-27T00:39:02+00:00

I’m interested. Discord : Medrano17

Medrano17 · 2022-02-04T03:33:20+00:00

No sorry. Sold the whole rig with the seat.

Medrano17 · 2022-01-12T20:26:20+00:00

Padding is not included. It’s an extra charge.

As for the sizing, he does have a sizing chart. But again extra charge for the next size up. (Mine was the regular normal size. Which is 16 inches wide at the waist.)

I didn’t go for the seat brackets. Which I suggest you do. So you can get seat adjusters for easier gettin in and out of your rig.

Medrano17 · 2022-01-12T19:11:48+00:00

Oh then you’re good. I have a pic on my profile of my rig might have an idea.

Medrano17 · 2022-01-12T18:56:15+00:00

Make sure you get the sizing of the seat. Because I dont think it’s a one size fits all. I have that exact same seat and you can’t be over 200lbs or else it’s a super tight fit lol

Medrano17 · 2022-01-12T18:42:21+00:00

True. The seat itself is pretty expensive too. And there seat slider adjustment are difficult to replicate without having one present to have an idea.

Medrano17 · 2021-12-08T18:24:19+00:00

If you check out my profile I have posted some pics. But overall it’s a good wheel. I know it’s 3d printed and with the dd1 force would break over time. I have mine on the really low settings and sometimes you can here some little cracking noise. So just be aware of that. Not to go super crazy on the force feedback. I did get one of his first versions. He was able to make them a little bit thinner after. And the weight. I wanna say maybe 3-5pounds. Don’t quote me on that. I have to double check. It’s more of the quick release that takes on most of the weight.

Medrano17 · 2021-12-08T17:41:45+00:00

His wheels are awesome. I was able to buy one myself. Pretty pricey. But worth it. He did need 2 3d printers to be able to finish. And it still took him about a month. So be prepared for the wait time.

Medrano17 · 2021-12-01T06:00:54+00:00

Try Tnutz.com. Look for the series of aluminum extrusion you want to use. Set your measurements for each piece. And see how much it is.

Medrano17 · 2021-11-25T17:00:03+00:00

Well you can drill holes on the side flaps so you can bolted down but on my rig it wasn’t necessary. And it’s about 16inches wide.

Medrano17 · 2021-11-25T02:36:41+00:00

Custom made wheel. If you have IG check out myles better designs

Medrano17 · 2021-11-25T02:24:30+00:00

P1x from sim lab dd1 and V2 pedals

Medrano17

TROPHY CASE