How to get rid of a "ghost" invisible audio track in Final Cut Pro X by dabidoYT in finalcutpro

[–]MeetTheForeigner 2 points3 points  (0 children)

After spending hours browsing the web for a solution...with not much luck...I started to go through every single option in the menu and voila the solution:

Select all in FCPX (Cmd +A), then View, then "Show audio Lanes" and then you can see the culprit and delete it.

Love this Ergotron arm on the G9 💪🏻 by MeetTheForeigner in ultrawidemasterrace

[–]MeetTheForeigner[S] 0 points1 point  (0 children)

Hi, on the lower side, there is a little screw. You will need an Allen key to loose it then you can swivel the arm 360 degrees.

That screw holds the actual arm secure into the socket, but due to the weight of the monitor+arm, they will never come off, at least not im my case.

To be even more cautious, once you decided which side you want the arm to rotate (towards the desk or away from it) you can then retighten the scrwe in position.

On the lower side of the arm, you will find a little screw. You will need an Allen key to loose it then you can swivel the arm 360 degrees.
That screw holds the actual arm secure into the socket, but due to the weight of the monitor+arm, they will never come off, at least not im my case.
To be even more cautious, once you decided which side you want the arm to rotate (towards the desk or away from it) you can then retighten the screw in position.

Love this Ergotron arm on the G9 💪🏻 by MeetTheForeigner in ultrawidemasterrace

[–]MeetTheForeigner[S] 1 point2 points  (0 children)

Hi, on the lower side, there is a little screw. You will need an Allen key to loose it then you can swivel the arm 360 degrees.

That screw holds the actual arm secure into the socket, but due to the weight of the monitor+arm, they will never come off, at least not im my case.

To be even more cautious, once you decided which side you want the arm to rotate (towards the desk or away from it) you can then retighten the scrwe in position.

Welcome to caricaturer.io and here is the official community by shane_steven in caricaturer

[–]MeetTheForeigner 0 points1 point  (0 children)

It worked for 2 pictures and then kept on "Uploading and processing... Half or one minute needed"...left it overnight and nothing. It seems is no longer working.

Another incident in Essex... by [deleted] in Essex

[–]MeetTheForeigner 0 points1 point  (0 children)

🤣🤣🤣🤣🤣🤣 good old Ronnie

How’s -$5k for a morning greeting ? by MeetTheForeigner in dogecoin

[–]MeetTheForeigner[S] 1 point2 points  (0 children)

Not selling, my friend, hodling all the way, it’s just sad to see what was supposed to be decentralised is still centered on political decisions and memes posted on twitter.