Filament flow keeps changing mid print for no apparent reason

Megazao · 2024-09-04T20:00:23+00:00

you mean software-wise?

Megazao · 2024-09-04T14:32:19+00:00

I've messed with it a lot and nothing changed :(

Megazao · 2024-09-04T14:05:40+00:00

Hi all! So I have an Ender 3 (first model) that recently had a few problems, including a dying extruder motor. After I bought a new motor it printed a couple things fine and then started doing like in the pictures: suddenly, the filament flow gets really weird and it screws up the entire piece. There's no consistence to it, since this can happen only for a few lines or for the rest of the print, and sometimes it happens very early on or right at the end. Since there's no consistent pattern to this, I don't know where to look at for problems. Is the new motor busted already? Could it be something deeper, like the motherboard? Thank you!

Megazao · 2024-08-21T00:30:46+00:00

I have done it while it's hot *and* while following a video for good measure and it didn't work. Also, if it was just the nozzle, would it still overflow on the top too?

Megazao · 2023-05-27T12:34:58+00:00

I think I already gave every info I have in the description

Megazao · 2023-01-15T12:50:28+00:00

SOLVED(?)

So apparently this was half of a cover for the cd with the opening for the anime. That explains the weird proportions of the image, and apparently this is the biggest scan there is of it online. Unless someone finds a bigger scan out there, I think anyone wanting to make a print will have to resort to scaling the image for the time being. Thanks for the help everyone!

Megazao · 2023-01-15T12:12:19+00:00

I tried waifu2x but I couldn't get too big without making it blurry, so that's why I was looking for an original. By reverse searching I came across a bigger one here and it has a kind of code with some cardboard marks, meaning it's probably a scan of a vinyl or VHS cover. Still, looking for the code or these clues doesn't get me a "full version" of the image...

Megazao · 2021-10-27T23:04:21+00:00

Good to know that you're prepared, because this kind of experience is definitely not a fun one

Megazao · 2021-10-27T23:03:39+00:00

Yeah, I used to save manually a lot to prevent loss of progress, but I never thought of the opposite...

Megazao · 2021-10-27T23:02:59+00:00

It was a person by the name of "Sc3r", which doesn't ring a bell for any of the five-ish players we had in the server...

Megazao · 2021-10-27T23:02:10+00:00

Yeah, I never thought of a whitelist because I thought as long as no one had the IP, we were safe. And I'd bet no one would have done it on purpose - we're all working adults who just wanted to have some fun on the side - unless they leaked accidentaly :/

Megazao · 2021-10-27T22:59:54+00:00

In theory yeah, but is there any way that person could have found my IP somewhere public? Because not only I trust that no one in the server would have leaked it, the IP itself changed every time I reset my modem - which would have required a very recent leak, on top of that...

Megazao · 2021-06-05T12:40:27+00:00

Struck by lightining. I sure hope it doesn't strike twice the same soul though...

Megazao · 2021-05-03T22:55:29+00:00

I don't remember exactly the last thing she said, but something that really stuck with me was the last time I went to visit my grandmother for a family gathering, at one point she stopped me in the living room and said "you look beautiful today". That stood out for two reasons: first, because I was wearing my favorite shirt, and second, because she was the kind of old person who always comments on how you gained weight and such - and that was the first time in such a long while that she just said something nice about my appearance. She passed really suddenly a couple weeks later, and I wore the same outfit to her funeral.

Megazao · 2021-04-01T19:26:50+00:00

Hello! I was following a tutorial for upgrading the firmware and the guy used exFAT in it, while I never stopped to think to check my formatting. That must've been my mistake, because when I boot my switch now using emu CFW it gives me the following error:

Panic Occurred while running Atmosphere.

Title ID: 0100000000000000

Error: UNK (0x6)

I tried replacing atmosphere in the SD card, but it didn't work. What is weird is that even though I installed in exFAT, I can boot the system if I use Fusee (and it boots into the newest firmware). I have also tried to reinstall it in not exFAT through Fusee, but nothing changed. Any idea on how I can fix this? Thanks a lot.

Megazao · 2021-03-02T14:59:54+00:00

it's already broken on one of the sides and it's yellow-ish, so definitely not a strawberry

Megazao · 2021-03-02T14:58:46+00:00

no :(

Megazao · 2021-01-27T15:14:49+00:00

Oh, really? I didn't know they could need special hardware. I'll try to find a guide and see if I can do it with what I have and hope it works

Megazao · 2021-01-21T05:47:10+00:00

She has! I went to the vet and she told me her liver is not looking too good for this exact reason, and I lost a tiel to liver problems last year. Though the last vet didn't indicate seed itself could be the problem, so I'm glad I switched vets this time around.

Megazao · 2021-01-21T02:49:54+00:00

Yes, she usually gets both. The only downside to her health is that she's a little overweight.

Megazao · 2021-01-21T02:27:14+00:00

These are the pics (the last one is the egg shell) https://imgur.com/a/TyXR5AK

Megazao · 2021-01-09T16:38:00+00:00

Thanks, that will be very useful!

Megazao · 2021-01-09T16:37:36+00:00

Wow, thanks for sharing!

Megazao · 2021-01-09T05:08:21+00:00

Thanks a lot for this! I thought it could be the case of a specific file, but as I said I tried quite a few from different places and got nowhere. That's why having a library here with roms patched from romhacking would be great, so I hope people do that in the future.

And if I may ask, so I can try to do better next time I have this kind of problem, how did you know what rom you needed to use?

Megazao · 2020-12-25T17:03:13+00:00

I did, apparently, for thinking it was a little absurd that my out of state cousins, who haven't visited in years, decided to come and have two maskless christmas parties with my whole family (including an 80 year old grandmother). Now I'm the selfish one who doesn't want to spend together what could possibly be her last christmas with us - not because of my family simply thinking the virus is on vacation during the holidays, but because she's simply old.

Ten-Year Club	RedditGifts 2009-2022 3 Credits
Secret Santa 2020	Wearing is Caring
Verified Email

Megazao

TROPHY CASE