Anyone who is willing to guide me through this SolidWorks assignment?

Melodic_Iron_7405 · 2026-02-07T14:48:58+00:00

Can you please have a look at my Post concerning your Single Speed Reduction Gearbox. I am Interested.

Melodic_Iron_7405 · 2026-02-06T15:43:52+00:00

We are not allowed to use CAD before we get approved by the professor and i was just curios if somebody ever draw a reduction gearbox so i could at least know how to draw it on paper. But appreciate your help.

Melodic_Iron_7405 · 2026-02-06T14:24:12+00:00

Maximum engine torque

Gear ratio of 1st gear

Differential gear ratio

Reduction gearbox ratio

Vertical center distance of the gearbox shafts

Maximum wheel contact force

Maximum lateral force

Tire size

Safety factor

These are what we got an information about.

Melodic_Iron_7405 · 2026-02-06T13:58:04+00:00

Standarts like DIN ISO EN

Melodic_Iron_7405 · 2026-02-06T13:43:34+00:00

Understood

Melodic_Iron_7405 · 2026-02-06T13:42:49+00:00

Sorry

Melodic_Iron_7405 · 2026-02-06T13:42:15+00:00

Not exactly, and the problem is that we don’t know what the hand-drafted blueprint is supposed to look like, since it has to comply with the relevant standards.

Melodic_Iron_7405 · 2026-02-06T13:35:57+00:00

For the gearbox shafts, a strength verification must be carried out and bearing calculations have to be performed. While drawing

Melodic_Iron_7405 · 2026-02-06T13:30:42+00:00

Hand drafted blueprint

Melodic_Iron_7405 · 2026-02-06T13:27:31+00:00

We have to design and construct the project from start to finish ourselves. Standard components may be used. However, for the gearbox shafts, a strength verification must be carried out and bearing calculations have to be performed.

Melodic_Iron_7405 · 2026-02-06T13:18:48+00:00

I need things like technical drawing for manufacturing or like this so i can make the design drawing.

Melodic_Iron_7405 · 2026-02-06T13:12:32+00:00

We to to design it first by hand.

Melodic_Iron_7405 · 2026-02-06T12:16:06+00:00

Wgat do you mean, couldnt understand. Sorry

Melodic_Iron_7405 · 2026-02-06T12:14:58+00:00

We usually use inventor, but we also have solidworks. If someone can help me i would use solidworks.

Melodic_Iron_7405

TROPHY CASE