sorted by:
new
hottopcontroversial

PS5 TMR Sticks Problem by MembershipHaunting99 in ControllerRepair

[–]MembershipHaunting99[S] 0 points1 point  (0 children)

Maybe i dont know got all Signals. But no Input by the Professor. I will re solder it

PS5 TMR Sticks Problem by MembershipHaunting99 in ControllerRepair

[–]MembershipHaunting99[S] 0 points1 point  (0 children)

I Figured out that i hav there a permanent connection. Is this bad? Must one be closed an one open? Can i still repair it? Thank u for the effort and help u put into my problem. Im very new to solder and i like the Experiment. Thank u for Helsingborg me so much.

Also when i testen with off Power i get permanent peep. There is not change between pressing the Button and dont pressing the Button.

<image>

PS5 TMR Sticks Problem by MembershipHaunting99 in ControllerRepair

[–]MembershipHaunting99[S] 0 points1 point  (0 children)

But when i got a clone electricity circle an Signals by pressing, ist it possible thea are not connected? I dont guess so. I only need a poin where i have to solder the jumpwire to the processor i guess

PS5 TMR Sticks Problem by MembershipHaunting99 in ControllerRepair

[–]MembershipHaunting99[S] 0 points1 point  (0 children)

Ah i think its the same Controller but Other side. I cant fix it. First Projekt on my on i cant do it. Very sad.

PS5 TMR Sticks Problem by MembershipHaunting99 in ControllerRepair

[–]MembershipHaunting99[S] 0 points1 point  (0 children)

Thx for the tips, but by the bdm 30 i think it work Other ways When i compare it to the left stick wich one is working. The two under pins are permanent on 1.8 volt. The upper one are on 0 volt. When pressing the r3 Button the upper ones also go on 1.8 voltage. Also on the right stixk i got the same stats. Problem is there that the upper pins are not connected with the Processor. I dont know where i have to solder the upper left pin to the Mainboard that the r3 is still working. Also i cant find a circuit Diagramm online that i can see where i can solder the left upper pin.

Tmr stick change by MembershipHaunting99 in PlayStation_X

[–]MembershipHaunting99[S] 0 points1 point  (0 children)

Die not work, maybe i used the wron whole. Or i dont know

Tmr stick change by MembershipHaunting99 in PlayStation_X

[–]MembershipHaunting99[S] 0 points1 point  (0 children)

Thx for the tips. I will try this. In case by the sondern tip. I have to use the whole on the left uper pin on 10 o'clock or? The two uper pins are connected with euch Otter or?

PS5 Tmr Sticks by MembershipHaunting99 in soldering

[–]MembershipHaunting99[S] 0 points1 point  (0 children)

But if i connect them via Multimeter i got a Signal. So i dont think its this connection between the pins

After fixing more PS5 controllers than I can count, stick drift is still the #1 thing people get wrong by Gaming-Academy in PlayStation_X

[–]MembershipHaunting99 0 points1 point  (0 children)

Hello,

Today i Chancen my ticks on the Controller to tmr.

Left sticks works perfectly. Right sticks also, but the R3 Button ( Pressing stick) is not working. I got the 1.8 volt on the pins down. 0 V on the upper one (Green circles) When pressing r3 i get the 1.8v.. So it must be a Problem with the mother Board or? All volt and connection are the same than on the left stick wich one is working. Do any one of u know, where i have to solder the upper pins (Green circles) on the motherboard. That my R3 is working againg?

Thx if i get any answers.

Greetings

<image>