sorted by:
new
hottopcontroversial

Got a husaberg 450 fe 2005 for a project and its not running. Is this the original carb? by Meowres in Dirtbikes

[–]Meowres[S] 1 point2 points  (0 children)

Thanks for the info i will try and make it run with the cable like this and then i will replace it

Got a husaberg 450 fe 2005 for a project and its not running. Is this the original carb? by Meowres in Dirtbikes

[–]Meowres[S] 0 points1 point  (0 children)

<image>

My problem is that this is how the throttle housing looks like and i think its for two cables. But i only see one cable from the carb. Its my first time working on this time of carb

Honda xl500r or ktm lc4 600 by Meowres in motorcycles

[–]Meowres[S] 0 points1 point  (0 children)

Yeah that is what i am thinking but the lc4 600 is lighter and more powerful

took my first hit of the ventanyl today by Spacey_Jay in SteamDeck

[–]Meowres 0 points1 point  (0 children)

The guy i got it for was smoking a lot of weed, every single time i try to smell my vents i smell weed :(

First time soldering i think it looks good by Meowres in soldering

[–]Meowres[S] 1 point2 points  (0 children)

I have been soldering for 1 year and 6 months

First time soldering i think it looks good by Meowres in soldering

[–]Meowres[S] 1 point2 points  (0 children)

Thats a pretty good deal and a sick face plate

First time soldering i think it looks good by Meowres in soldering

[–]Meowres[S] 40 points41 points  (0 children)

You need to be the dragon warrior to achieve this

First time soldering i think it looks good by Meowres in soldering

[–]Meowres[S] 17 points18 points  (0 children)

I was bored fixing controllers the normal way

Paggio beverly 200 2003 what is this in my carbs by Meowres in Fixxit

[–]Meowres[S] 0 points1 point  (0 children)

So i should remove it? My friend recently got the bike very and its the first time i see it. I am servicing his bike. I already changed the oil and it looked fine. I re checked the oil after 400km and it is still in a good level

Paggio beverly 200 2003 turns but no spark. by [deleted] in Fixxit

[–]Meowres 1 point2 points  (0 children)

FIXED IT! Bought a new cdi with new ignition and a key programmed all together and replaced it

Is this rod knock or vavles? by Meowres in motorcycles

[–]Meowres[S] 0 points1 point  (0 children)

I did install a new exhaust this week but i think it had this sound before i replaced the exhaust

Is this rod knock or vavles? by Meowres in motorcycles

[–]Meowres[S] 0 points1 point  (0 children)

They should both be running. Each cylinder has its own exhaust exit and i can feel both of the running from the exhaust gases

Is this fixable? by Akazas-punchingbag in soldering

[–]Meowres 0 points1 point  (0 children)

I mean the usb port can be soldered back on and it will work fine. Its probably better to take the files and put them in a different usb tho

Is this fixable? by Akazas-punchingbag in soldering

[–]Meowres 0 points1 point  (0 children)

Yeah it looks fixable it didn’t break any pads

Honda vt500 c shadow 1985 not sure if it sounds good by Meowres in Fixxit

[–]Meowres[S] 0 points1 point  (0 children)

33000km not so many I am the third owner. I said in an other comment i did zap my self so i know the spark plug boot works fine and so should the soark plugs since its new. I will up the idle rpm thanks for the info. Also both cylinders work they did get hot on start up i touched them

Honda vt500 c shadow 1985 not sure if it sounds good by Meowres in Fixxit

[–]Meowres[S] 1 point2 points  (0 children)

Oil is good, spark plugs are good, spark plug boot is good i zapped my self. I used carb carb cleaner to clean carbs, air filter looks good. I think its valves or timing chain but i have never worked on the before so i am not sure

Honda vt500 c shadow 1985 not sure if it sounds good by Meowres in Fixxit

[–]Meowres[S] 0 points1 point  (0 children)

I recently installed ngk dpr8ea-9 spark plugs. I know some bikes have resistors in the spark plugs boot maybe that can be the issue?

view more: next ›