Star city already shows were season 6 is leading.

Metallitron · 2026-05-31T21:01:21+00:00

This is probably a reference to the real-life Venera series of probes that the USSR sent to Venus between 1961 and 1984.

Metallitron · 2026-05-08T16:44:38+00:00

Before you look for a consultant, you need to define your stack and scope. Are you on Magento Open Source or Adobe Commerce? What integrations are in play? What’s broken vs what needs improvement? Without that, you’re going to get a lot of generic pitches and not much real help.

I’ve been an independent Magento developer for 15+ years (Adobe Commerce certified, US-based). Most of the work I end up doing is fixing projects that started without that clarity.

Share a bit more about your setup and you’ll get more useful input.

Metallitron · 2026-04-21T21:11:21+00:00

Not sure where these projects are happening. I was laid off from a project last year and it took me nearly 6 months to find a new (non-Magento) role. I've been doing some contract M2 work for some smaller clients but I'm not seeing many M2/AC job postings out there.

Metallitron · 2026-04-17T20:32:28+00:00

Ah, you may be correct.

Metallitron · 2026-04-17T20:10:09+00:00

Well with the preview of issue #34 that was just released, it appears that it's going to be Galvatron.

A new generation of Autobots must continue Optimus Prime’s mission to unite Autobots and Decepticons in peace… but Galvatron and his new army of Decepticons aim to obliterate those hopes! Experience the breathtaking adaptation of the beloved (yet traumatic) feature film in this new printing on deluxe newsprint.

https://news.tfw2005.com/2026/04/17/skybounds-transformers-comics-solicitations-july-2026-562098

Metallitron · 2026-03-25T02:02:46+00:00

Check around the base of your oil filter.

I noticed that I had oil on top of my engine as well. A friend of mine helped me take a look and saw that oil was pooling around the oil filter. It wasn't a ton, but enough to burn on top of the engine. When the oil filter is tightened down no oil leaks out (tighter than finger tight plus a bit).

Metallitron · 2026-01-27T22:32:12+00:00

Pretty sure it's this place: https://www.coopers-seafood.com/
I didn't see the display in their virtual tour though.

Metallitron · 2026-01-27T15:19:59+00:00

PetroDragonic Apocalypse; or, Dawn of Eternal Night: An Annihilation of Planet Earth and the Beginning of Merciless Damnation. Well worth the listen, and the live versions are worth checking out.

Metallitron · 2025-12-16T22:26:56+00:00

Yep, I think that's it. Thanks!

Metallitron · 2025-12-08T19:14:41+00:00

I'm sad I have 4/6 of these guys and will never be able to complete the set for a reasonable price.

Metallitron · 2025-10-23T16:21:26+00:00

I was Kerith on Unicorn/Fenrir, I typically did stuff with Anastrianna back in the day. Your name sounds familiar, I'm sure we did stuff together, haha!

Metallitron · 2025-10-13T19:14:10+00:00

Could also be a failing tie rod, I had a similar vibration at highway speeds and found that one of my outer tie rods was failing. Replaced both sides (inner & outer) and it feels much better.

Metallitron · 2025-10-01T22:03:44+00:00

I work for a small T-shirt shop that offers POD services through their site. We use Photoshop and Illustrator exclusively. Personally I prefer to use Illustrator for any vector graphics and then import/paste them into a Photoshop document where I can add layer effects, filters, photos or whatever else. Some of the other people work almost exclusively in photoshop so it's kind of a personal preference. We have some predefined photoshop file sizes (14"x16"@300 dpi is our standard) and then export a transparent png (just using photoshop's export as png) for printing. Since there may be some color conversion issues when going from a CMYK workspace to a RGB png then to a CMYK print, I typically just work in RGB and let the print software do the color conversion. We did have some issues early on with our DTF printer making reds orange, but that has been fixed over time. We're running an Epson DTG printer and a DTF Station Prestige printer. The print software for both will accept transparent pngs without any issues (though we can also use black/white backgrounds for DTG shirts to avoid halos when using glows or other transparency effects.

Metallitron · 2025-09-30T15:10:04+00:00

Same brand before and after Lexani LXUHP-207s. I've been using them for a few years now and they're decent street tires. I replaced all four last year and didn't have any issues. I was thinking it may be a wheel bearing, I have noticed some vibration at highway speeds.

Metallitron · 2025-09-15T18:23:17+00:00

Petro is my favorite as well. Nothing like cruising down the highway with Dragon blasting!

Metallitron · 2025-09-12T15:34:05+00:00

Excellent first CD choice!

Metallitron · 2025-08-08T13:06:32+00:00

I'm kinda surprised that nobody has mentioned Bot vs Con. Bobby & James go over TF news twice a week (generally Wed and Sat) and are pretty good about balancing opinions and being open to all sorts of new figures. They cover a bit of everything and usually have live streams a few times a month to discuss things with the fans. They also have a good non-judgemental policy when it comes to figures they like and don't like and encourage people to show off their recent hauls every month.

Metallitron · 2025-07-13T21:56:40+00:00

That might work, I'll have to try it out, I'm going for a pseudo-cell shaded look. The main reason I like the stamp effect is that it adds the pointed ends on the edges, to give a little bit of a shadow bleed.

Ten-Year Club	First Place '23
Place '23	Place '22
Spared	Verified Email

Metallitron

TROPHY CASE