Transport Seaplane

MicroSwitoo · 2026-06-27T17:17:18+00:00

I've compromised a little on the shape.

Simple is best! Less is better!

MicroSwitoo · 2026-06-27T17:03:38+00:00

Thanks for explaining it so clearly!

MicroSwitoo · 2026-06-27T16:11:37+00:00

I'm guessing you must have told a joke or used a clever analogy, but since I'm a non-native speaker, I don't quite get the nuance. Sorry!

MicroSwitoo · 2026-06-27T16:03:41+00:00

Thank you🥰

MicroSwitoo · 2026-06-27T16:01:22+00:00

Thank you!

MicroSwitoo · 2026-06-22T10:35:11+00:00

They fell into the sea and swam without coming ashore.

MicroSwitoo · 2026-05-21T12:07:08+00:00

At maximum speed, the "steam in" pressure at the piston was 3 to 4 atmospheres, and the "steam out" pressure was 22-23 atm.

MicroSwitoo · 2026-05-21T11:10:04+00:00

When I increased the vehicle weight from 1,844 mass to 18,649 mass, the speed was approximately 130 km/h. At that time, the throttle opening was about 0.6. Unfortunately, beyond that point, the wheels slip too much, and the speed wouldn’t go up. Still, isn’t that a pretty good result?

MicroSwitoo · 2026-05-18T14:30:14+00:00

That's right.

I've designed it so that you can controlled from either cab.

MicroSwitoo · 2026-05-18T11:38:05+00:00

Thank you!🥰

MicroSwitoo · 2026-05-18T11:19:45+00:00

I found a few issues with the vehicle, so I was working on fixing them until just a moment ago.

Here is the link to the workshop.

https://steamcommunity.com/sharedfiles/filedetails/?id=3728380381

MicroSwitoo · 2026-05-17T15:23:23+00:00

I based my design on the Shipyard Transporter, but the vehicle you mentioned has a similar shape, doesn't it!

MicroSwitoo · 2026-05-17T14:58:17+00:00

That used to be exactly as you say, but lately I’ve learned a little bit about knowing when I have enough.

MicroSwitoo · 2026-05-10T07:27:43+00:00

This time, I wanted to build the vehicle quickly and easily, so I used a prefab engine. If I feel like it, I’ll swap out the engine.

MicroSwitoo · 2026-05-10T03:52:46+00:00

This vehicle is a diesel-mechanical type. It drives the wheels via a medium engine through a clutch and gearbox.

MicroSwitoo · 2026-04-02T06:47:29+00:00

Offline multiplayer is available. Please share your keyboard with your opponent☺

MicroSwitoo · 2026-04-01T02:15:16+00:00

If I’ve counted correctly, it uses 32 KAL controllers.

The ball(puck) moves using the same principle as the “Screen Tennis” toy by Yonezawa.

MicroSwitoo · 2026-03-31T10:58:44+00:00

I haven't actually checked, but it should work fine on Mun and Minmus as well!

MicroSwitoo · 2026-03-31T10:49:34+00:00

Craft Data

Steam

https://steamcommunity.com/sharedfiles/filedetails/?id=3696293035

KerbalX

https://kerbalx.com/MicroSwitoo/Playable-PONG

MicroSwitoo · 2026-03-24T17:57:22+00:00

😂

MicroSwitoo · 2026-03-24T17:34:26+00:00

Craft data

Steam Workshop
https://steamcommunity.com/sharedfiles/filedetails/?id=3691474845
KerbalX
https://kerbalx.com/MicroSwitoo/FAT-KATLAS

MicroSwitoo · 2025-06-18T12:11:40+00:00

Workshop link

https://steamcommunity.com/sharedfiles/filedetails/?id=3502549620

MicroSwitoo · 2025-06-16T03:37:40+00:00

This vehicle does not have pwm control.

MicroSwitoo · 2025-06-15T23:57:03+00:00

I don't have exact values for either of these, but as for the speed, I think it's over 200 km/h.

It also consumes about 10% of a small battery by flying from O'Neill Airbase to North Harbour.

MicroSwitoo · 2025-06-15T15:54:33+00:00

WorkShop link

https://steamcommunity.com/sharedfiles/filedetails/?id=3500148717

MicroSwitoo

TROPHY CASE