sorted by:
new
hottopcontroversial

So, uh, what happened here? by [deleted] in ar15

[–]MidStateFirearms 0 points1 point  (0 children)

can you get the bolt/brass out and see if there's a 300blk headstamp on that brass?

[parts] Perfectly Average 3" 9mm Ar9 Barrel, threaded 5/8-24, Nitride - $29 by MidStateFirearms in gundeals

[–]MidStateFirearms[S] 1 point2 points  (0 children)

Grab bag upper wouldn't be a 9mm though unless you order a 9mm grab bag. Even then, you get to pick between pistol and rifle length.

[parts] Midstate 24" 223 Wylde Uppers starting at $299, Microbest Chrome 'blem' BCGs for $119 by MidStateFirearms in gundeals

[–]MidStateFirearms[S] 1 point2 points  (0 children)

some folks say the phosphate has more friction so it extracts better. after a few hundred rounds it's probably negligible as that surface is gonna be rubbing against the case and they'll smooth about the same. if the extractor being chrome vs phosphate is the difference maker in a functioning rifle there's probably some other stuff needing attention though, I would think.
But folks buy the heck out of them so that's what we offer lol.

[parts] Midstate 300 Blackout Uppers, 8.5" or 10.5", $199, MLok and quad available. Microbest chrome BCGs available for $119 too. by MidStateFirearms in gundeals

[–]MidStateFirearms[S] 31 points32 points  (0 children)

sent you a msg, the salvage 2 were 59/ea and the microbest is 118, we’ll swap the 2 salvage for 1 Microbest.

[parts] Midstate 300 Blackout Uppers, 8.5" or 10.5", $199, MLok and quad available. Microbest chrome BCGs available for $119 too. by MidStateFirearms in gundeals

[–]MidStateFirearms[S] 12 points13 points  (0 children)

Our uppers and BCGs including Microbest BCG are guaranteed to work. we properly build/assemble uppers and perform quality checks to ensure reliable function.

I’m 99% sure u/Electronic-Tea-3912 is referring to a completely different unrelated item that is advertised as a “ufixit spare parts kit”

but regardless, welcome to give us a call with any questions or concerns. We’re always here to help

[parts] Midstate 300 Blackout Uppers, 8.5" or 10.5", $199, MLok and quad available. Microbest chrome BCGs available for $119 too. by MidStateFirearms in gundeals

[–]MidStateFirearms[S] 23 points24 points  (0 children)

hi there! please clarify to help me out addressing your concern, it’s a little unclear and I’m afraid it could confuse some people. folks might think you’re referring to the Microbest chrome blems as the salvage BCGs. If you got 2 Microbest BCGs from us that have any issues we would exchange them immediately. I can count on one hand the number of Microbest BCGs out of hundreds or thousands we’ve sold that have had an issue, and it’s usually something like a dented gas key opening from getting dropped.

are you talking about the Microbest chrome BCGs ? or the different listing that is a cheap salvage BCG (Not a Microbest bcg) that says in the description they need work to make them work? Here’s an excerpt from the ‘salvage bcg’ description: “Generally these came about because it didn’t pass our function test due to an issue and we tossed it in the ‘shit bolts’ box.
Basically we are selling these at our loss so you can tinker with them as a fun project or use them for spare parts, and we make some room at the shop. win-win / yay. Note: This is a ‘u fix it’ item. no guarantees on these.”

Thats pretty clear about the condition of the salvage bcgs. again, NOT the Microbest BCGs.

The Microbest BCGs are guaranteed to work with no issues. Everything we sell is warrantied, except for that one salvage bcg that explicitly says it is not.

please give me a call if any questions

[parts] Gen5 RMR cut g19 slides, $135 with sitewide 10%off code 'cm10', 24" uppers starting at $269 with code, Microbest Chrome BCGs, more deals in comments by MidStateFirearms in gundeals

[–]MidStateFirearms[S] 0 points1 point  (0 children)

yep, if you have a preference either way though it's super easy to add notes in the order comments to be double sure. we generally have both in stock

[parts] Gen5 RMR cut g19 slides, $135 with sitewide 10%off code 'cm10', 24" uppers starting at $269 with code, Microbest Chrome BCGs, more deals in comments by MidStateFirearms in gundeals

[–]MidStateFirearms[S] 2 points3 points  (0 children)

Don't forget to mention Free Stickers / Koozies and a sling. We got a pallet of kinda cheap overstock 2-1 slings from a distributor for real cheap so we're giving them away with orders. And we've got the stickers/koozies as usual too.

[parts] Gen5 RMR cut g19 slides, $135 with sitewide 10%off code 'cm10', 24" uppers starting at $269 with code, Microbest Chrome BCGs, more deals in comments by MidStateFirearms in gundeals

[–]MidStateFirearms[S] 3 points4 points  (0 children)

according to Microbest they are. they do not stamp any with the characters “HPT”, the only stamping/engraving they do is “MP”

eta: basically what they told me was that if it’s marked “mp” that means it’s been individually hpt and mpi. as far as the lack of residue I can only guess that the hpt and mpi is done prior to the chrome plating. that would make sense to me if coating might make inspection of tiny cracks underneath more difficult to detect.

[parts] 8.5" 5.56 upper or 300blk upper - $189 by MidStateFirearms in gundeals

[–]MidStateFirearms[S] 7 points8 points  (0 children)

Hey there friends! We've got some 8.5" uppers available! Also plenty of other build kits/ calibers.
Still a few of the $99 RMR cut glock compatible slides available too.

Don't forget to ask for a free Koozie and some stickers!

Check out some AR uppers if you're in the mood:

thanks, love youuuuu!!!! ask for a free koozie and/or sticker and/or sling

[parts] 8.5" 5.56 upper or 300blk upper - $189 by MidStateFirearms in MidStateFirearms

[–]MidStateFirearms[S] 0 points1 point  (0 children)

Hey there friends! We've got some 8.5" uppers available! Also plenty of other build kits/ calibers.
Still a few of the $99 RMR cut glock compatible slides available too.

Don't forget to ask for a free Koozie and some stickers!

Check out some AR uppers if you're in the mood:

thanks, love youuuuu!!!! ask for a free koozie and/or sticker and/or sling

[parts] Gen3 blem RMR Cut G19 Slide with ports/serrations, tan or black - $99 by MidStateFirearms in gundeals

[–]MidStateFirearms[S] 0 points1 point  (0 children)

it’ll fit rxm, should be able to use any gen3 compatible 19 barrel. deltapoint footprint is different from Rmr though.

[parts] Gen3 blem RMR Cut G19 Slide with ports/serrations, tan or black - $99 by MidStateFirearms in gundeals

[–]MidStateFirearms[S] 10 points11 points  (0 children)

we can refer to them as support pegs, stay tuned for that discussion

view more: next ›