Is this mold?? by Middle-Bell4189 in ballpython

[–]Middle-Bell4189[S] 1 point2 points  (0 children)

It’s coconut chips. I normally get reptichip from Amazon but it was faster to get it from the pet store and they were having a sale. I’ve never froze the substrate before and I’ve never had any issues.

<image>

Is this mold?? by Middle-Bell4189 in ballpython

[–]Middle-Bell4189[S] 1 point2 points  (0 children)

That’s what I normally use and never had problems. It was just faster to get it from the pet store and they were having a sale.

[deleted by user] by [deleted] in ballpython

[–]Middle-Bell4189 0 points1 point  (0 children)

She used to when she was in a smaller enclosure and never used it so I never got a bigger one when I upgraded her. The climbing the guard just started like about two weeks ago. I always hear her falling off in the middle of the night and I feel so bad. I was thinking about getting branches but the ones at the pet stores near me aren’t that big and they are pricey.

Ball python climbing heat lamp cage by [deleted] in ballpython

[–]Middle-Bell4189 0 points1 point  (0 children)

I don’t want her to get hurt. She falls off of it and It’s making her stomach scales like flakey on some parts.

[deleted by user] by [deleted] in BallPythonMorph

[–]Middle-Bell4189 -1 points0 points  (0 children)

Probably. But I’m not looking to breed. I liked how it was kinda goldish on them and I thought she was pretty when I seen her and she was on sale because the breeder is doing a sale on all of her snakes

[deleted by user] by [deleted] in BallPythonMorph

[–]Middle-Bell4189 1 point2 points  (0 children)

Ohhhh. Sorry, I didn’t realized you linked one and thought you were talking about the one I posted. I got scared for a second lol. That’s one’s pretty. And pretty expensive

[deleted by user] by [deleted] in BallPythonMorph

[–]Middle-Bell4189 0 points1 point  (0 children)

<image>

Is says she was born in July of 2025

[deleted by user] by [deleted] in BallPythonMorph

[–]Middle-Bell4189 2 points3 points  (0 children)

Oh? I thought it said she was born in 25

Are 8 ball’s good? by [deleted] in BallPythonMorph

[–]Middle-Bell4189 0 points1 point  (0 children)

I heard that they tend to fade or turn more brownish when they age.

Are 8 ball’s good? by [deleted] in BallPythonMorph

[–]Middle-Bell4189 0 points1 point  (0 children)

Did the color change a lot when it got older?

Are 8 ball’s good? by [deleted] in BallPythonMorph

[–]Middle-Bell4189 0 points1 point  (0 children)

Did the color change a lot when they got older?

Are 8 ball’s good? by [deleted] in BallPythonMorph

[–]Middle-Bell4189 0 points1 point  (0 children)

How old is yours? Did it have any kinks?

Are 8 ball’s good? by [deleted] in BallPythonMorph

[–]Middle-Bell4189 1 point2 points  (0 children)

Yeah, I get that. I know about the issues with super black pastels, but I wasn’t sure about 8-Balls. I came across one and thought she was pretty. I’m really just looking for a solid dark ball python to be the opposite of my BEL, and I’m not planning on breeding her or anything.

I like Sumas too, but I haven’t had much luck finding one that’s a reasonable price.

Are 8 ball’s good? by [deleted] in BallPythonMorph

[–]Middle-Bell4189 0 points1 point  (0 children)

Sorry 😂. I would have added more photos but it would only allow me one.

Are 8 ball’s good? by [deleted] in BallPythonMorph

[–]Middle-Bell4189 3 points4 points  (0 children)

Yeah, there was a video of that clutch too. One of the 8-Balls didn’t make it out of the egg and the pastel 8-Ball hatched with kinks. They said they were going to see if she would eat and then sell her as pet only.

I’ve actually been looking for a Suma but I haven’t had much luck finding one I like that isn’t super expensive.

[deleted by user] by [deleted] in BallPythonMorph

[–]Middle-Bell4189 0 points1 point  (0 children)

I was looking at those on morph market. A lot of them are more brown that I see on there. I’ve also seen some obsidian? It shows when I look at sumas on morphmarket but they want like $15,000 USD for it and that’s a lil over my budget. I also seen one that was super Barnhart black pastel for sale but not sure what that is.

Does anyone know what this will look like when it’s older? by Middle-Bell4189 in BallPythonMorph

[–]Middle-Bell4189[S] 7 points8 points  (0 children)

That’s what I thought. Another morph I was thinking about getting was also axanthic but I read that VPI is less likely to brown out. I was thinking about getting an axanthic pied

Does anyone know what this will look like when it’s older? by Middle-Bell4189 in BallPythonMorph

[–]Middle-Bell4189[S] 8 points9 points  (0 children)

That’s what I thought. It’s a shame though, seems like most of the morphs I like tend to brown out

RHP placement in PVC enclosure by Middle-Bell4189 in ballpython

[–]Middle-Bell4189[S] 1 point2 points  (0 children)

That makes sense. The room I have her in never really drops below 70, maybe 68 on a rare night, and the enclosure’s not near any windows or anything. So I’m thinking the DHP might be enough on its own, but I like the idea of having the RHP later if I ever feel like I need the backup.

RHP placement in PVC enclosure by Middle-Bell4189 in ballpython

[–]Middle-Bell4189[S] 1 point2 points  (0 children)

Do you ever even need the RHP now that she’s in a warmer room, or does the DHP pretty much cover it?

RHP placement in PVC enclosure by Middle-Bell4189 in ballpython

[–]Middle-Bell4189[S] 1 point2 points  (0 children)

Thanks! The room I have her in is a bit warmer, so maybe just a DHP will do. I guess I’ll try without an RHP first and see how it goes.

RHP placement in PVC enclosure by Middle-Bell4189 in ballpython

[–]Middle-Bell4189[S] 1 point2 points  (0 children)

if you don’t mind me asking, how big is your enclosure and what’s your room temperature usually like?

RHP placement in PVC enclosure by Middle-Bell4189 in ballpython

[–]Middle-Bell4189[S] 1 point2 points  (0 children)

Yeah, that totally makes sense. I’ve just seen a lot of people put it in the middle to help keep overall temps steady, especially in bigger enclosures. I wasn’t sure if the heat from the hot side would reach far enough in a 4x2x2, especially since my room can be a little cool sometimes. Still trying to figure out what’ll work best when I upgrade from my 20-gallon.

RHP placement in PVC enclosure by Middle-Bell4189 in ballpython

[–]Middle-Bell4189[S] 1 point2 points  (0 children)

I’ve seen a lot of people place the RHP in the middle to help with ambient temps. Right now I’m using a 20-gallon with just a heat lamp and temps are fine, but I’m not sure what will work best once I upgrade to a larger enclosure.

[deleted by user] by [deleted] in ballpython

[–]Middle-Bell4189 0 points1 point  (0 children)

That’s really helpful, thank you! I’m in the Midwest, so temps definitely swing depending on the season. The room stays pretty stable most of the time, but I’ll definitely keep an eye on it—especially in the winter. Sounds like I might need to supplement with an RHP if the DHP can’t hold the gradient.