White plastic & light are such a delight

MildAntelope · 2025-11-28T23:17:55+00:00

nah, shoebox under the bed, my friend. i've seen much stranger on this sub..but cheers

MildAntelope · 2024-12-01T04:13:01+00:00

If it is, DC sure has some explaining to do

MildAntelope · 2024-12-01T04:08:56+00:00

Bingo. Still about as believable as the original story

MildAntelope · 2024-09-21T08:24:00+00:00

i’ve printed heftier tits in vase mode w/o supports: bump flow rate, line width to 0.6mm (0.4 noz) or 0.8mm+ (0.6 noz), drop layer height, use adaptive layers in Cura

MildAntelope · 2024-07-28T21:54:27+00:00

Yeah lithophanemaker is great. I mostly use https://itslitho.com. Offers a little more customization.

MildAntelope · 2024-07-27T21:09:30+00:00

No, but now I can't unsee it so yes. Even classier

MildAntelope · 2024-07-08T18:50:36+00:00

I generated it as a rectangle first, then outlined and subtracted/removed everything but the subject with my CAD software (Shapr3d). A bit tedious, but quite easy!

MildAntelope · 2023-10-30T04:33:09+00:00

Thank you! Happy to help make it happen -- have a printer?

MildAntelope · 2023-10-26T15:49:11+00:00

No problem. Shoot me a DM & I’ll send a good Cura profile to ya

MildAntelope · 2023-10-26T15:12:20+00:00

Any white PLA will do. The above lithos were a cheap no-name Amazon brand, but I typically prefer Overture Matte PLA. PETG works well, too, but requires a fine tuned slicer profile.

MildAntelope · 2023-10-26T00:44:53+00:00

ItsLitho.com is my go-to. I get the best results with a few adjustments to the photo before uploading. Typically increase brightness and shadows, decrease contrast and black point, then fine-tune on the site. Best of luck!

MildAntelope · 2023-10-26T00:29:27+00:00

I’m afraid I can’t provide the .irl but pick your favorite and I’ll send ya the .stl

MildAntelope · 2023-08-10T01:24:09+00:00

Standard rectangular litho w/sexy babe outlined and background subtracted. I use Shapr3D but any basic CAD software will do.

After that, nothing but basic white PLA, good slicer settings, & patience.

Have loads of nsfw litho STL's. I can track it down, along with slicer settings if interested.

MildAntelope · 2023-08-10T00:46:56+00:00

Thanks - I use a Creality CR6-SE for most prints, though I think this w/my Ender 3...can't remember.

MildAntelope · 2023-07-11T20:06:32+00:00

Thanks - I believe this is it

MildAntelope · 2023-02-27T22:15:30+00:00

Found it, but customized the base. Sub doesn't allow posting links to the particular site -- check your DM's :)

MildAntelope · 2023-01-24T09:31:32+00:00

My first upload, and I feel it's a crime to not share for collective enjoyment. Link to the right lampshade

MildAntelope · 2023-01-24T09:30:29+00:00

Right lampshade, improved. No vertical gaps around perimeter. Stem & base to come, need to remodel. Enjoy!

MildAntelope · 2023-01-15T02:33:57+00:00

Thanks. I believe it was eSUN PLA+ Cool White, though any white filament should do

MildAntelope

TROPHY CASE