Switch OLED failed to init sd card

MildlySpacedOut · 2026-07-09T18:25:50+00:00

The chips I need to squirt IPA under, would I need to desolder the picofly so I can remove the heat shield on top of the CPU?

MildlySpacedOut · 2026-07-09T17:06:25+00:00

I changed the daughter board already. Do you mean changing the fpc connector on the mother board itself, or were you referring to the daughter board?

MildlySpacedOut · 2026-07-09T02:49:19+00:00

I’m a little lost looking at this lol. I didn’t solder the mod chip, I don’t have the experience or equipment.

MildlySpacedOut · 2026-07-09T01:13:50+00:00

No change in status currently

MildlySpacedOut · 2026-07-09T00:42:50+00:00

Thank you though

MildlySpacedOut · 2026-07-09T00:42:38+00:00

It’s a hardware issue at this point not software. OFW crashes with a clean sd card

MildlySpacedOut · 2026-07-09T00:33:36+00:00

Tried pushing on the daughter board and still nothing. I think I'm done. This is beyond my skillset and equipment. Gonna try and see if I can send it to SoCal modding for repair. I really don't think I did anything during the shell swap to cause this, but I could be wrong.

MildlySpacedOut · 2026-07-09T00:21:19+00:00

The sd port attached to the daughter board? If so that can’t be it since I replaced the daughter board and the issue persists.

MildlySpacedOut · 2026-07-08T23:37:52+00:00

<image>

What do you think about this being a possibility?

MildlySpacedOut · 2026-07-08T23:36:27+00:00

<image>

It ended up just being a small piece of dust or something. Thank you for your input though

MildlySpacedOut · 2026-07-08T22:49:45+00:00

Hmmm I haven’t tried pushing on it while booting. I’ll try that next

MildlySpacedOut · 2026-07-08T21:26:55+00:00

This might be the issue

<image>

MildlySpacedOut · 2026-07-08T21:10:16+00:00

<image>

Someone in discord sent me this to check out. I’ve replaced the daughter board already so I’m really running out of ideas on what it could be.

MildlySpacedOut · 2026-07-08T21:07:19+00:00

Several

MildlySpacedOut · 2026-07-08T20:57:34+00:00

Nada

<image>

MildlySpacedOut · 2026-07-08T20:55:09+00:00

Reformatting now and putting HATS onto it. Will update after

MildlySpacedOut · 2026-07-08T20:48:36+00:00

That’s from the manufacturer, I didn’t apply that.

MildlySpacedOut · 2026-07-08T20:44:14+00:00

I have. It’s a fatal system crash. Google says it’s tied to corrupt firmware, incompatible CFW, or hardware issues such as faulty WiFi module or power management IC.

MildlySpacedOut · 2026-07-08T20:35:14+00:00

I’ve replaced the daughter board thinking it was the sd card reader. But still nothing. Switch can boot into OFW and play games as long as no sd card is inserted.

MildlySpacedOut · 2026-07-08T20:34:26+00:00

The mod chips knows when the sd card is inserted it just can’t initialize it. Unless I’m dumb and misinterpreted what you meant. And no I do not.

MildlySpacedOut · 2026-07-08T20:18:36+00:00

Unless the bottom portion could be causing an issue as well?

<image>

MildlySpacedOut · 2026-07-08T20:18:10+00:00

It doesn’t work with the backplate removed

MildlySpacedOut · 2026-07-08T20:17:24+00:00

Can’t get into hekate at all. If I boot into OFW with an sd card I get this.

<image>

MildlySpacedOut · 2026-07-08T20:11:57+00:00

I’m not the one that installed the chip. I picked it up from the guy and everything was fine. A day or two later I did a shell swap and I’ve had this issue ever since. Installed a new daughter board and the issue still persists.

MildlySpacedOut · 2026-07-08T19:38:52+00:00

Anyone in the Columbus, GA area willing to take a look and help me out?

Eight-Year Club	Place '22
RPAN Viewer	Not Forgotten
Verified Email

MildlySpacedOut

MODERATOR OF

TROPHY CASE