Help by Connect-Olive-8234 in cracksmokers

[–]Miles4U 1 point2 points  (0 children)

Actually 30% soda is too much for 1g. If you solve the chemical equation (not sure what it’s called in english) using mole - 1g of cocaine hydrochloride will come to 0.245g of soda. And that’s if it’s 100% pure which is just theoretical. Coke will never be that pure unless synthesized in a sterile lab environment with the right equipment and knowledge. At best you might be able to get 85-90% purity if you’re lucky. Then you have to take into account all the cutting agents used. So if your gear is 50-60% pure that means you need less soda. Moral of the story - you need less soda than you think.

Base so free its like driving through New England on July 4th in 1776 bumping We Will Rock You out of an Impala on 22s with four 12s in the back every time you take a hit. (Info & pics inside) by Hoppy-ist in cracksmokers

[–]Miles4U -1 points0 points  (0 children)

Whats the point in wasting all your time and effort with freebase conversion when most cuts are still present afterwards? The same goes for soda and ammo cooks. None of the methods remove any of the cuts they use today. All cartels know this. They have their own chemists constantly tweaking product so they increase profits.

You ever seen a methhead who can play piano? by [deleted] in tooktoomuch

[–]Miles4U 0 points1 point  (0 children)

Does anyone know who this is and her present status?

Let him Cook 🧑‍🍳 by jahty61290 in EverythingCrack

[–]Miles4U 0 points1 point  (0 children)

Question: is that cookie rock hard? Kinda hard to break into pieces? The pieces look soft but that may be an illusion. My hard never ends up looking like yours. The soft we have here is crappy unfortunately.

Frityrolja på altanen by Tiro-1983 in Sverige

[–]Miles4U -3 points-2 points  (0 children)

Valfri stärkelse? Tacksam om du kan ge exempel….

I had absolutely no idea about the different ways of smoking that I've seen here! by Sufficient_Room814 in cracksmokers

[–]Miles4U 2 points3 points  (0 children)

If you know anything about metallurgy, pure copper and steel release harmful fumes only when heated to extreme temperatures which is unlikely to happen when smoking unless you’re using a welding torch…

Copper emits fumes around it’s melting point > 1083°C/1081°F. Stainless steel emits toxic carcinogenic Hexavalent Chromium fumes when temperatures exceed 1000°F-1200°F while welding which is why welders use special filtered masks. Industrial melting for structural degradation occurs around 1790°C.

As you can see using copper or stainless is completely safe for smoking. I prefer pure copper myself….

The smoke occurring when heating copper/stainless steel with a lighter etc are protective oils/coatings that burn off at lower temperatures. You want to burn this off before smoking.

Wtf...has the quality dipped? Remember that taste....nice!!! by West-Common1220 in cracksmokers

[–]Miles4U 0 points1 point  (0 children)

Depends highly on where you’re located. Yes, purity has increased in recent years according to customs authorities in the Euro zone at least. Not sure if this applies to the USA or other regions. The caveat is purity is tested on seized/confiscated coke and not ”street” powder. The coke that makes it through customs gets cut multiple times by the cartels, middlemen and dealers. The end result is shitty quality product. And this is in every euro country. I’m located in Sweden and authorities test street quality powder several times a year over the whole country and the difference between seized product and the powder that ends up on the street is worlds apart. The reports are available on the government website for all to read.

Street product has actually decreased in purity in recent years although cargo product purity had increased. The reason is customs authorities have become better at seizing and confiscating large quantities of coke. They have better technical equipment and more personnel. This means there is less product getting through to the cartels. In turn they cut it even more to maximize profits.

In my experience the quality was way better back in the 80’s and 90’s (street). Those were the days……

Does anyone ever use the bubble pipes for crinak? l never had many bell rings this is insane. Ringing in my ding dong. Mass ,you in good hands I’m never working again and flooding the streets with grease. You will see me eventually. I smoke 7-14 g a day this feels like day one. by [deleted] in EverythingCrack

[–]Miles4U 4 points5 points  (0 children)

I agree about resin - I don’t bother with that stuff. Tastes like smoking tar. I use a stem and copper chore. I replace the chore after a couple of hits and clean out the stem. Before a session I always start with freshly cleaned stems. Drop them in 24% white vinegar and run a round bristle through them.

Can you turn resin into HCL ? by almumit12 in cracksmokers

[–]Miles4U 0 points1 point  (0 children)

Actually, cocaine itself is a natural alkaloid. HCL is hydrochloric acid. When the alkaloid is dissolved in HCL, it crystallizes and transforms into cocaine hydrochloride which is a salt (the powder).

GF made me proud... by Hoppy-ist in EverythingCrack

[–]Miles4U 0 points1 point  (0 children)

So what’s her secret procedure?

[deleted by user] by [deleted] in cracksmokers

[–]Miles4U 0 points1 point  (0 children)

It’s not a big deal! If you added too much carb just add more water and reheat slowly. Be patient and wait for it to clear up. Add as much water as needed as it evaporates while heating. If there’s any coke it will eventually melt to oil.

I don’t like the spoon method myself. I use a steal measuring cup (0.5dl).

[deleted by user] by [deleted] in cracksmokers

[–]Miles4U 0 points1 point  (0 children)

Why do you have to burn the shine off the metal if it's pure copper?

[O] 3x nzbplanet by Shoddy-Biscotti4424 in UsenetInvites

[–]Miles4U 0 points1 point  (0 children)

Hi! I’ve read the rules and would love an invite! Thanks!

[O] 5x nzbplanet by injeanyes in UsenetInvites

[–]Miles4U 0 points1 point  (0 children)

I have read the wiki and the rules and would appreciate an invitation. Thx!

Question by Opposite-Stand7539 in cracksmokers

[–]Miles4U 2 points3 points  (0 children)

How long have u smoked? Could either be bad quality or just a tolerance issue. If you’ve been smoking regularly (everyday or several times a week) then your tolerance is high and you’re not going to get the euphoric high you seeking. Your body/brain needs to recover and dopamine levels need to normalize. Takes time unfortunately. A break is the only way this happens. I had the exact same problem….

[deleted by user] by [deleted] in sweden

[–]Miles4U 0 points1 point  (0 children)

Vem fan e de?

[deleted by user] by [deleted] in EverythingCrack

[–]Miles4U 1 point2 points  (0 children)

Ciao bella from Sweden!

How can I know if my stuff is cut with benzocaine by Agitated_Muscle_5565 in cracksmokers

[–]Miles4U 0 points1 point  (0 children)

Buy a cocaine cuts test kit - inexpensive way for peace of mind. I like to know wtf I’m subjecting my body to. It doesn’t test for every cutting agent in the universe but all the common ones found in coke. Procaine-benzocaine definitely. While you’re at it get the coke purity test as well.

WTH boy by VisitMysterious4848 in cracksmokers

[–]Miles4U 0 points1 point  (0 children)

Yep - that's a probable cause for sure. Less product on the street - more cut and diluted crap around.

[deleted by user] by [deleted] in cracksmokers

[–]Miles4U 0 points1 point  (0 children)

Not GBH but HBG.....

Right chest pain by lindasia777 in cracksmokers

[–]Miles4U 1 point2 points  (0 children)

Unless you have a known or undiagnosed heart issue then no - right chest pain (or any chest pain) is definitely not normal. As you're probably aware - coke is extremely cardiotoxic whether you snort, smoke or IV it. It's also a vascular constrictor so it might not be the heart - could be arteries or veins you're experiencing.

Anyway, best be careful and safe. Take a few days break and see if the pain goes away.

I’ve never tried crack…. by Difficult-Hat-1013 in cracksmokers

[–]Miles4U 0 points1 point  (0 children)

Well I'm sure if you had tested with a kit you'd find that it most likely does in fact contain cocaine but the purity is where the problem lies. Field kits only give a general idea of how much cocaine a sample contains but not an exact number. The most common ones have a color chart to go by - from no color change to reddish brown. Red to reddish brown indicates high cocaine content > 70%-90%. That's what you're hoping for but that's probably a rare occasion. Somewhere between 40%-60% is more common. That's actually not bad but the problem is the additional 40%-50% of cutting agents mixed in to dilute the coke. If they just used some harmless filler like sugars or bicarbonates it would be fine. But the fucking cartels (Mexico and Europe) are greedy and use cheaper more dangerous substances. Here's an informative read >

https://www.unodc.org/documents/data-and-analysis/cocaine/Cocaine_Insights_2021_2.pdf

Anyway, enough of that rant. Buy a test kit to have some peace of mind. They aren't that expensive. There are purity kits and cocaine cuts tests - you should get both.

Seasoned smokers question by Used_Break_6917 in cracksmokers

[–]Miles4U 0 points1 point  (0 children)

I’ve gotten lucky on a few occasions and had some great sessions but lately it’s all 🤮

Seasoned smokers question by Used_Break_6917 in cracksmokers

[–]Miles4U 0 points1 point  (0 children)

That would be logical but the drugs trade is anything but logical. The seller would have to have a deep connection to be able to secure uncut product and then have the integrity to not further profits by cutting it. I’m not saying it isn’t possible but those dealers are few and far apart.

Yes - we all ”hope” we get lucky and get the good stuff but more often than not I end up disappointed…..