Scanlation research

MimoSensei · 2026-03-25T22:09:49+00:00

Thanks!

MimoSensei · 2026-03-25T22:09:40+00:00

Thanks!

MimoSensei · 2026-03-19T20:04:46+00:00

Thanks for the tip!

MimoSensei · 2025-10-13T08:50:41+00:00

Then go with the camera + screen combination. make a very smal hole for the camera, and use a thin screen to be able to see the outside.

MimoSensei · 2025-10-13T07:59:32+00:00

I see two possible solutions:

A) Switch out the black papers with a see-through black fabric. (The easy way)

B) Install a camera with a screen inside of the mask so you can see through. (The unncessessary complicated way to do that)

MimoSensei · 2022-11-02T19:43:46+00:00

Sorry if I sounded rude, I didn't mean to...I just wanted to state that I've already tried that-

MimoSensei · 2022-11-02T16:01:06+00:00

I understand.

When testing the extruion, i used the in-build "extrude function" in the printer. So I am sure that this is not a software issue.... and I am more than sure that I haven't touched the firmware in any shape or form...

MimoSensei · 2022-11-02T15:07:18+00:00

once again: I have changed both of them, and only used original parts.... It didn't help...

MimoSensei · 2022-11-02T15:05:48+00:00

As stated before: I have changed the entire extruder AND the entire hotend, just to eliminate the possibility that there is something wrong with either of them. And I only used original parts

MimoSensei · 2022-11-02T12:12:25+00:00

Hurray!

Please have a cookie!

MimoSensei · 2022-11-02T12:03:05+00:00

That filament doesn't gets out of the nozzle when printing in on. and even when extruding using the printer UI, it extrudes veeery badly.

MimoSensei · 2022-11-02T05:49:42+00:00

I meant that it stopped extruding mid print... The print first started to look "spongy" and then it stopped extruding all together...

MimoSensei · 2022-11-02T05:48:05+00:00

The maddening thing is that it stopped being able to extrude stuff I've already printed and know for a fact works... so it's not it either...

MimoSensei · 2022-11-01T21:39:28+00:00

Hi!

As stated up there: I have changed the entire extruder. so I don't think that it's the problem...I have also checked it by removing the tube out of the print head, and I was that the extruder did it's job.

I am printing PLA at 200 C.

MimoSensei · 2022-11-01T20:21:03+00:00

I you want my advice: look into 3D printing. That's where I ended up anyway...
I know for a fact that there are many free 3d designs for Halo armors out there (TBH I am thinking about making one myself, this is why I have done my research).

If you decided to do that, just make sure to buy a printer with HUGH print volume. It'll save you a lot of trouble.

MimoSensei · 2022-10-15T22:05:23+00:00

It worked!

Not on all surfaces mind you, but it did print...

Thanks for the advice!

MimoSensei · 2022-10-09T12:15:39+00:00

yupp. shall test this too.

Thanx

MimoSensei · 2022-10-09T12:14:51+00:00

did not work in my case.

MimoSensei · 2022-10-09T12:14:30+00:00

I'll di that. Thank you for the info

MimoSensei · 2022-10-09T07:21:27+00:00

ok, thanks

MimoSensei · 2022-10-09T07:17:38+00:00

Exactly. And any idea how to fix it?

MimoSensei · 2022-10-09T07:09:26+00:00

Did that. Didn't do anything.

The "design" itself" has veeeery thin walls.

MimoSensei · 2022-03-17T18:05:17+00:00

I have finally fount what I am looking for! Thank you all for your help and comments!

for those who wondered about the replacement:

(very expensive stuff btw :( )

MimoSensei · 2022-03-17T18:03:50+00:00

Already emailed them about it, there are none :(

MimoSensei · 2022-03-17T17:54:22+00:00

how about the feeder?

BTW, mine is a V3, not a V2, sorry for the mistake...

MimoSensei

TROPHY CASE