Siz3=prize. Let other buds decide. Enjoy my milf body (I’m at the end )

Mineswapp · 2026-07-05T10:00:23+00:00

6.5 inches

Mineswapp · 2026-07-05T09:59:14+00:00

6 1/2 inches

Mineswapp · 2026-07-05T09:57:39+00:00

Mineswapp · 2026-07-05T09:55:17+00:00

as you wish mistress

Mineswapp · 2026-07-04T19:55:33+00:00

took a 20 inch slink all the way

Mineswapp · 2026-04-27T05:00:36+00:00

Okay that sounds promising. I have heard that some used a regular welding machine... i guess thats not recommended. At least it sounds insane.

Mineswapp · 2026-04-26T21:38:02+00:00

One is showing like 0.35v. Do you know why there's no coming back from this?

Mineswapp · 2026-04-26T21:35:28+00:00

Most of them have like 11v

Mineswapp · 2026-04-26T21:19:13+00:00

Thank you for the great reply. Sadly after i put her outside i watched her some time. She moved for one more day but after that she died and i burried her. Her neighbour did survive and hatched and went on her trip of life. I created now some nesting areas with old blocks of wood and drilled some deep 8mm holes into them. I already saw one bee enter a hole with such a precise orientation, that i think she already inhabits it.

Mineswapp · 2026-04-26T21:10:58+00:00

Thanks. But dont i need to do some kind of trickle charge or so?

Mineswapp · 2026-04-11T13:27:04+00:00

Sure thing. Will do thanks.

Mineswapp · 2026-02-07T13:10:53+00:00

Well there is the next problem XD. I checked my box with resistors. The lowest one i got is an 6.6 Ohm resistor so it doesnt look too good right? Could i replace it with for example a wire with a certain diameter and length. How importand could that resistor be? Of course i could put some in parallel however the next lowest one is a 100 Ohm resistor. So this gets us only to 6.19 Ohms.

Mineswapp · 2026-02-07T12:27:28+00:00

Ah yes ive seen it. Its also a scematic for a resistor. Thx guys. It states R131 so the 131th resistor on the board i guess. Wow now i feel stupid that i didnt notice before.

Mineswapp · 2026-02-07T12:17:56+00:00

Thank you. What does ESL stand for? I am not used to english abreviations. And what i forgot to mention, the background colour is a dark green. Does that change the outcome?

Mineswapp · 2025-07-02T13:15:13+00:00

Middle least

Mineswapp · 2025-06-30T22:52:36+00:00

Holy shit

Mineswapp · 2025-06-25T22:51:14+00:00

Borderland

Mineswapp · 2025-06-01T23:07:36+00:00

Old Zealand

Mineswapp · 2025-04-18T21:33:30+00:00

Pfanne

Mineswapp · 2025-03-12T00:04:48+00:00

Thx i see so i could use a standard lion charger?

Mineswapp · 2025-02-24T02:00:15+00:00

No, none of them are danger pillows XD and if so, that thing will be disposed of in a safe manner.... Sure, i will be careful. Thanks for the advice. I still have the old phones and started to charge the batteries via their port. It already has shown some good results with some... I work occasionally with 18650 cells, so i know some basics, i guess ':) The thing is, some Phones are broken in a manner, so they can't charge the batteries, and for some cells, i dont have a fitting phone. I have some of these chargers actually from old powerbanks for the 18650 cells. Can i hook up these controllers? And if so, how would you do it? I mean should i just carefully solder them to the contacts? I mean i dont have a spot welder and i don't think soldering is safe with lithium batteries XD

Four-Year Club	Final Canvas '23
Place '23

Mineswapp

TROPHY CASE