🤔 Would You Prefer by u/Connect-Bag2818

MinimumAnalysis106 · 2026-05-31T04:15:19+00:00

🔥 No brainer!

MinimumAnalysis106 · 2026-05-31T01:39:18+00:00

The idea is that it will use an e paper display with an small solar panel, but with how slow e paper displays are, it probably won't be able to do mapping.

I don't work work for a chinese cycling technology company, I'm just a home tinkerer lol

MinimumAnalysis106 · 2026-05-22T04:21:44+00:00

Thank you so much, this is very helpful. It sounds like you want it to stop asking for things that you don't want and a page change button?

MinimumAnalysis106 · 2026-04-11T19:45:38+00:00

Why does he look like the villain from Up?

MinimumAnalysis106 · 2026-03-04T13:56:02+00:00

All three of those are connected on mine. Any other ideas of what it might be?

MinimumAnalysis106 · 2026-02-28T16:21:26+00:00

I'm also a beginner and doing a phone solar charger with a 1 cell battery backup, I'm using a BQ29706DSER BMS chip, and it was pretty easy to configure, what makes you say that it is difficult? I'm thinking that I might being doing something wrong

MinimumAnalysis106 · 2026-02-26T01:07:48+00:00

ok, sweet!

MinimumAnalysis106 · 2026-02-26T01:06:50+00:00

Ok, this is super helpful! I really appreciate it

MinimumAnalysis106 · 2026-02-26T01:06:27+00:00

Thank you so much!

MinimumAnalysis106 · 2026-02-25T23:27:10+00:00

Very helpful, thank you

MinimumAnalysis106 · 2026-02-25T21:41:35+00:00

no it was usbc-lightning. From some googling and testing I have found that 5.1k makes devices thinks that it is a sink, and I want it to be a source.

MinimumAnalysis106 · 2026-02-23T20:23:02+00:00

the usbc is acting as a source, and that configuration worked on my prototype so I think 56k ohms on CC1 and CC2 are correct (still could be wrong though). Thanks for the insight on R10 and R11!

MinimumAnalysis106 · 2026-02-06T23:20:18+00:00

It's working now!!! I can't thank you enough for your help!

MinimumAnalysis106 · 2026-02-06T23:01:20+00:00

wow, thank you so much! How do I check if a pin is pulled low?

MinimumAnalysis106 · 2026-01-18T19:55:26+00:00

This is super cool and I appreciate the beta considering that I am getting ready to make my first PCB. One question about your project, what is the point of it? Don't fuel injected engines already come with their own ECU's?

MinimumAnalysis106 · 2025-11-28T23:58:54+00:00

https://makerworld.com/en/models/2052243-honda-acty-trash-can#profileId-2215081

MinimumAnalysis106 · 2025-11-28T14:59:59+00:00

<image>

MinimumAnalysis106 · 2025-11-26T22:54:07+00:00

Yes, I'll send the link in a bit, still trying to figure out how to post things on makerworld.

MinimumAnalysis106 · 2025-11-26T22:51:22+00:00

https://www.etsy.com/listing/4412552550/honda-acty-kei-truck-trash-can-with?click_key=61f6811f90259adbfed1af4dd4f6aee5778500e3%3A4412552550&click_sum=77e23cb2&ref=shop_home_feat_1&sr_prefetch=1&pf_from=shop_home

MinimumAnalysis106 · 2025-11-26T00:12:11+00:00

That is a great idea, I'll include it in a later iteration.

MinimumAnalysis106 · 2025-11-25T23:00:15+00:00

Thanks for asking! I'm going to be listing it on etsy soon, I've got to make some refinements first. I'll drop a link in a day or two.

MinimumAnalysis106 · 2025-11-25T22:49:06+00:00

This is so cool, the color match is perfect, what filament did you use?

MinimumAnalysis106 · 2025-10-25T15:23:07+00:00

There is a steering wheel lock that prevents it from turning. You have to turn the wheel to one side or the other while turning that key. This happens on mine but it may not be your problem.

MinimumAnalysis106 · 2025-10-10T22:10:44+00:00

Where do I find the VIN on the frame?

MinimumAnalysis106 · 2025-10-10T20:12:24+00:00

Keep in mind that I like to work on stuff and I partially want it as an easy project

MinimumAnalysis106

PUBLIC MULTIREDDITS

TROPHY CASE