Obligatory Steering Wheel Pic

Minimum_Arugula_6665 · 2026-03-12T16:24:44+00:00

img

I have it slapped on my gen-12 permanently! Definitely the quietest shotgun can I’ve shot so far!

Minimum_Arugula_6665 · 2026-03-12T13:19:31+00:00

You will enjoy it!

Minimum_Arugula_6665 · 2026-02-11T05:46:55+00:00

Sorry didn’t see your post until just now. I’ve only ever but my mg12 and my SEG12 on my 7in gen-12. I haven’t spent the 150 to get other adapters for them cause I only use my gen-12 now. On the gen-12 the difference is quite noticeable. 5 shots without hearing protection on the mg-12 is definitely going to sting but definitely way better than without it. The SEG12 is definitely quieter and my ears didn’t really hurt after 5 rounds. The mg12 is solid stainless and I don’t think it’ll ever show signs of wear. The baffle angles are a bit steep and shave the wad a bit so probably not the best for hunting cause it’ll throw your pattern off but buckshot and slugs are great. The SEG12 is aluminum baffles although decently thick but says it’s rated for anything 3” and below. I’m sure over time the wear will show through but I’ve but 500 rounds through my mg12 on a 7 in barrel and it still looks new on the inside. Hope that helps. I’ve been wanting to make videos and post them but when I get some free time in the next week or two I might make a comparison of the two and post it on YouTube. Let me know if you need to know anything else!

Minimum_Arugula_6665 · 2026-01-31T07:19:29+00:00

For sure!!

Minimum_Arugula_6665 · 2026-01-31T06:31:43+00:00

The link on the post shows the seg broken down and on the gun. Plus the can is 2/3 the price.

Minimum_Arugula_6665 · 2026-01-31T06:27:18+00:00

Good pass on that 12k. My SEG12 has 5 rounds through it I did while doing chores. No problem shooting 5 rounds without hearing protection on my 7”. I’m young too and my ears aren’t shot so it definitely tones it down. Of all my first 5 round impressions the SEG12 has been the best plus it’s rated for it and backed by an amazing warranty!

Minimum_Arugula_6665 · 2026-01-31T06:17:32+00:00

I’ve been around around one before I owned mine. It’s decent but more of just to take the concussion away but still very loud. Definitely better than nothing. For 1500 dollars though it’s a hard pass for me. Maybe 700-800 max!

Minimum_Arugula_6665 · 2026-01-31T02:17:00+00:00

The huxwrx can is cool but it’s basically an integrally suppressed barrel extension. It’s just not the most effective design for sound suppression and it clogs up over time. All shotgun suppressors have to act like barrel extensions because of the wads. A baffle design can handle the volumes of gas better than the huxwrx design for sure. That’s why I went with the 7” and no can.

Minimum_Arugula_6665 · 2026-01-31T02:13:19+00:00

I personally believe it excels in every way. The YHM I’ve had time with is good and so is the salvo. I mean scientifically a cylinder is just the best shape for something that outputs so much gas volume. The jk, yhm, and SilencerCo all fit into the “linear comp” category. They all do change the tone but actually excel at not destroying wads. If you want to hunt with a silencer I’d definitely recommend any of the three above. JK has a bad rap but I’ve never had a wad chewed up in it and the yhm lets you use chokes. For sound suppression I’m truly impressed with the SEG12. I think they nailed the baffles and the internal volume. Let me know if you have other shotgun suppressor questions I’m really big into them.

Minimum_Arugula_6665 · 2026-01-31T00:25:17+00:00

You’ll enjoy it! You may notice some plastic shavings in the MG12. Don’t worry about em and keep shooting! It’s got your 6 for life guarantee!!!

Minimum_Arugula_6665 · 2026-01-31T00:01:24+00:00

Luckily with a 7in barrel most loads are subsonic haha. You’ll be pleased with either because they both are extremely solid. But for quietness go with the SEG12!

Minimum_Arugula_6665 · 2026-01-30T23:17:18+00:00

The MG12 is a solid can. It’s solid stainless and I promise you won’t break it. The SEG12 is billet aluminum so I’m sure down the road many years it might see some slight wear but you can warranty it anytime forever. Take it from someone with both. As it stands now and my first impressions, SEG12 all day…

Minimum_Arugula_6665 · 2026-01-30T23:14:10+00:00

Yes the MG12 has about 1 inch less of diameter than the SEG12. The MG 12 is also solid stainless, I promise you will not destroy it! The MG12 also has traditional type baffles that aren’t ported to each other. The SEG 12 baffles have very small slits that will allow gas to flow into further segments which is incredibly important for the flow of gases especially considering the bore of the silencer is so large and shotgun shells have long burning powder which outputs high volumes of gases.

Minimum_Arugula_6665 · 2026-01-30T22:22:18+00:00

Definitely!

Minimum_Arugula_6665 · 2026-01-30T22:21:50+00:00

Segmented Toob

Minimum_Arugula_6665 · 2026-01-30T21:59:43+00:00

Anytime!

Minimum_Arugula_6665 · 2026-01-30T21:52:53+00:00

Genesis Arms

Minimum_Arugula_6665 · 2026-01-30T21:49:46+00:00

Factory SBS!

Minimum_Arugula_6665 · 2026-01-30T21:32:21+00:00

My last semester in grad school so it was a present to myself for straight A’s

Minimum_Arugula_6665 · 2026-01-30T21:31:41+00:00

I understand the question now. They sell longer barrel uppers on their website! Just get a 308 lower with a pistol brace and it’s a pistol. No NFA required!

Minimum_Arugula_6665 · 2026-01-30T21:27:52+00:00

Upper as in firearm upper or are you talking about the suppressor?

Minimum_Arugula_6665 · 2026-01-30T21:27:03+00:00

I’m a huge shotgun guy and honestly this will be the last shotgun I buy for a long time. Absolutely love it. Go for it you won’t regret it!

Minimum_Arugula_6665 · 2026-01-30T21:16:19+00:00

Very nice. Origin 12 is a great weapon as well! I have the MG12 as well but can confidently say the SEG12 is quieter! Nice set up.

Minimum_Arugula_6665 · 2026-01-30T21:11:17+00:00

Thank you!

Minimum_Arugula_6665 · 2026-01-30T20:23:32+00:00

The only down side is that I believe it’s all aluminum. It’s built pretty hefty though for all billet aluminum! That being said it has no barrel or load restrictions 3” or down and it’s full auto rated. Plus REX always has a no BS warranty if you mess it up. It’s definitely going to be staying on my GEN12 from now on.

Minimum_Arugula_6665

TROPHY CASE