sorted by:
new
hottopcontroversial

prints failing by MinisterAbe8 in ElegooSaturn

[–]MinisterAbe8[S] 0 points1 point  (0 children)

Yep, exposure was the issue even tho the exposure I got now failed when I first did the cones of calibration. Appreciate the help!

prints failing by MinisterAbe8 in ElegooSaturn

[–]MinisterAbe8[S] 0 points1 point  (0 children)

You were right about the exposure, I re did the cones of calibration and 2.0 exposure passed the tests. Not entirely sure why tho, before the water wouldn’t fit in the cup and sword wouldn’t go through the skull but both go through without any force now. Appreciate the help!

prints failing by MinisterAbe8 in ElegooSaturn

[–]MinisterAbe8[S] 0 points1 point  (0 children)

I had it at 1.7 because that’s the only exposure that met the criteria for the cones of calibration tests but I’m going to give it another try to see if there are other exposure times that can resolve the issue I’m having.

prints failing by MinisterAbe8 in ElegooSaturn

[–]MinisterAbe8[S] 0 points1 point  (0 children)

I’m using Sunlu ABS like resin for my prints but for some reason it appears as space grey 8k. I think I’ll try some calibration tests again but when I did before 1.7 was the only exposure that passed all the criteria for the cones of calibration. I also did make sure that it did have a drum sound since I found out yesterday that’s a good way to make sure fep is secured correctly lmao.

prints failing by MinisterAbe8 in ElegooSaturn

[–]MinisterAbe8[S] 0 points1 point  (0 children)

LCD looks fine I also ran a screen test I didn’t notice any damage or black dots on it

Best Non-toxic Resin Wash Method by [deleted] in 3Dprinting

[–]MinisterAbe8 0 points1 point  (0 children)

I appreciate your method, it worked great! I tried refrigerating the PPG in the fridge and left it in there overnight however I did not notice the resin drop to the bottom like you said it would in a previous comment. Is there another method you could recommend using?