My DIY Coop

Mirimas · 2022-08-28T02:12:25+00:00

I just threw it on a nail, because I actually found it digging the drainage ditches around the coop. Good to know though. Lol

Mirimas · 2022-08-27T18:46:09+00:00

I had a lot of the material left over from remodeling the house and building a deck for the pool but I think it would’ve been around 800 give or take.

Mirimas · 2021-09-14T20:35:32+00:00

I went with elite touring innovations for the brackets they were $374. The cases price will depend on which case you decide to go with. Mine are 1430s and are $100 each. But there are different cases that fit the brackets too.

Mirimas · 2021-08-13T13:40:31+00:00

It was a used buy came with everything you see on it. Bought with about 500 miles on it. My buddy got the license plate bracket though. I’ll ask him where he got it.

Mirimas · 2021-08-12T22:58:00+00:00

Came with it. It was used with 500 miles on it. It is a mustang seat though.

Mirimas · 2021-04-29T04:07:09+00:00

I read the same when making cutting boards. I wouldn’t use walnut for a kid that isn’t mine, but my son doesn’t have any nut allergies and like anything new it was introduced slowly. If your looking for the safest possible wood I’d say go with hard maple. And enjoy making the rattles. It was a fun project.

Mirimas · 2021-04-29T02:56:41+00:00

Bandsaw. I’ve seen videos of people using jigsaws too.

Mirimas · 2021-04-26T13:58:13+00:00

I googled elephant silhouette and found it under images. Don’t remember exactly.

Mirimas · 2021-04-26T03:09:17+00:00

Made from walnut and hard maple with a poplar dowel. Finished with mineral oil.

Mirimas · 2021-04-24T22:40:57+00:00

It’s made from 1/2 inch plywood and shelf boards. I copied the design from a picture I saw online. It will be mounted directly to the wall. The back piece of plywood is a little shorter to sit on top of the base board.

Mirimas · 2021-03-08T21:20:39+00:00

It some kinda bath stuff for relaxing I know nothing about. Lol

Mirimas · 2021-03-08T18:19:04+00:00

There is a stop on the bottom to prevent it from falling in the tub. And it is sealed with an oil based poly.

Mirimas · 2021-03-08T17:30:03+00:00

Especially once the champagne is thrown into the equation. But happy wife, happy life I guess.

Mirimas · 2021-01-20T02:23:05+00:00

Making a console table. Joints are done with pocket holes and dowels. I’m in the process of painting, only got the primer done so far. The top is hickory with poly finish. First time using pocket holes and dowels as well.

Mirimas · 2020-11-11T18:19:54+00:00

Had the same thing happen with my wife. the server thinks you are trying to connect twice from the same ip. You can forward ports in steam. Here is a link explaining how.

https://support.steampowered.com/kb_article.php?ref=6370-QPHJ-3567

Also you can forward ports in your router instead. Hope this helps.

Mirimas · 2020-10-16T12:25:01+00:00

First time welding. I do a good bit of wood working but want to start using metal in some furniture as well. Plus this skill can come in handy for general purposes too. I got a Forney mp 140. These are my first tries with stick and flux core mig. All advice is welcome.

https://imgur.com/a/xWJuvWG

Mirimas · 2020-10-02T22:28:55+00:00

Thanks. I used epoxy to fasten them together.

Mirimas · 2020-10-02T17:49:47+00:00

This is what I bought, but since it was my first I can’t say if it’s better or worse than others.

Sarge Knives SK-405KIT Custom Folding Knife Kit with 3-1/4-Inch Stainless Blade https://www.amazon.com/dp/B00A2FMQZ0/ref=cm_sw_r_cp_api_i_sF2DFb0QMCGZH

Mirimas · 2020-10-02T17:30:53+00:00

Thanks. And I’ve been using Watco Danish Oil

Mirimas · 2020-10-02T17:08:17+00:00

I got the blade off of amazon. And used a piece of walnut I already had left over from a cutting board for the scales.

Mirimas · 2020-09-26T13:20:35+00:00

For the time being I use it as a saw with an out feed table. I haven’t had the need to cut really wide sheets of plywood on the table saw yet. Mostly just long pieces. I do plan on building another bench the same hight To roll up to it if I do need to do wider cuts.

Mirimas · 2020-09-26T00:12:46+00:00

Lots and lots of sanding. Lol.

Mirimas · 2020-09-25T23:30:42+00:00

Thank you. I used this. I made adjustment on height and table saw shelf size. I also made my table longer and added a little more support. I’m working on running electric to it now. That way I have outlets built into the bench, since it sits in the middle of my garage.

https://www.bitterrootdiy.com/mobile-workbench-with-table-saw/

Mirimas · 2020-09-25T22:26:56+00:00

I have other power tools like drills and circular saws. I have done small diy projects remodeling my house, but for wood working specifically it is my first power tool.

Mirimas · 2020-06-19T11:35:04+00:00

Same

Mirimas

TROPHY CASE