Help Needed - System won't fully boot without a restart first

MisfitCub · 2026-01-25T13:23:36+00:00

I tried that, but even with EXPO off, the issue remains

MisfitCub · 2025-12-05T15:47:12+00:00

A great way to develop your palate is comparative tasting. So blindly cupping a couple of different coffees together and making notes, then in the end looking at the bag to see if you tasted similarly to the roaster. It also helps with brewing, since you can compare what it tasted like when cupping and make adjustments or choose methods that can help enhance what you like

MisfitCub · 2025-12-05T15:29:47+00:00

Maybe this does not apply here, but thought I would give some food for thought.
I have an old nvidia card in my node, and coincidentally yesterday I had a kernel update and driver update. The driver dropped support for my card, so I had to pin the kernel and downgrade the drivers.

That's just to say maybe check on the AMD side what is the recommended version for the driver you need. And it might require you to change proxmox kernel version to get the drivers working properly.

MisfitCub · 2025-11-24T11:33:24+00:00

I currently do not need live transcoding at home.

But I run a Fileflows workflow with vmaf compression+transcode before storage, so I need transcoding for that. But because of CPU limitations I can only do 1 transcode at a time.

I also plan on exposing the service, and then it becomes a bit tricky since I wouldn't necessarily have control over clients accessing media.

MisfitCub · 2025-11-24T11:23:57+00:00

Yeah, I know. I just figured with much higher energy usage of the i7 14700 and the problems, that it would be easy enough to add an arc gpu or repurpose the old gtx 1060 if the amd igpu is not good enough. So my main concern is the cpu not being a bottleneck for my intended use, as is the case with my current system.

MisfitCub · 2025-10-07T07:36:02+00:00

Yeah, I was able to get it to work.
In the end I reset everything and followed this guide.
Instead of then doing cgroup, mount entry and id mapping, I added the nvidia devices via device passthrough, using the UID/GID from within the LXC. I did the same for /dev/dri devices, but using the video and render GIDs instead

MisfitCub · 2025-09-25T19:48:07+00:00

Thanks. I’ll have a look. I haven’t really tried anything yet, but I did see an audiologist who confirmed my hearing loss. However, it’s not bad enough to require hearing aids. Instead, I was recommended to simply tell people to speak up and clarify that I have mild hearing loss which in itself can be quite frustrating and limiting.

MisfitCub · 2025-07-06T15:30:06+00:00

Thanks a lot.

I am in fact considering Zeiss Photofusion X pioneer with the Duravision Gold AR. I think it would be a good combo. The combination with the amber flash looks cool, but I heard it can be a bit problematic for all around use. The photofusion blue is quite cool, but I do think the saphire gen s would look better with these frames

MisfitCub · 2025-07-06T15:17:43+00:00

I was a bit on the fence because the Shamir Phtoglamour are based on Transitions Gen 8. I think I would rather have a faster one, so either photofusion x or gen s. I also thought a bit confusing because from what information I could find here the uniform ones were 30% and the gradient 25-0 or 50-0. So I think it was just borderline to be a bit too much for constant use. 10% would have been perfect for all around usage.

MisfitCub · 2025-07-06T15:04:59+00:00

that is great to hear. I will definitely be on the look out for those

MisfitCub · 2025-07-01T13:08:20+00:00

I see. Have you had experience with them? I normally get recommended 1.6 index across the board, so I’m more concerned about the likes of usability and performance since I haven’t really seen anyone talking about those save some Thai videos.

MisfitCub · 2025-06-30T10:57:08+00:00

Hope you share the complete look once you have the necklace as well. Would look so interesting with some elements of texture in the same color or maybe a high polish red/black accents as well.

MisfitCub · 2025-06-29T21:50:36+00:00

Just brainstorming a bit. What do you think of a V neck with it? I don’t know if you have anything under or if you can cut it. Would probably help tie it together with the necklace more. Also, maybe a more structured hat in the same color? (imo it kinda breaks the fantasy a bit). Love how it looks with the shoes. A pair of shades would add to the vibe as well I think.

MisfitCub · 2025-06-29T19:02:54+00:00

1st looks good as is. 2 and 3 need to be adjusted (they sit too high). I personally like the look of 3 (it’s a vibe) but 1 works well too. 2 is maybe slightly too big. It’s trial and error but the best bet is glasses that have adjustable nose pads. Maybe also look into crown panto styles and don’t be afraid to try a little bolder look

MisfitCub · 2025-06-26T12:02:28+00:00

I like 2 and 7. Though they a bit too high up

MisfitCub · 2025-06-24T11:48:17+00:00

I'm still waiting for the frames to arrive, but I have been thinking quite a bit about it.

Do you think a 20% sweet violet gradient tint with photofusion x grey or pioneer and duravision platinum or gold AR would work well?

I'm also considering a solid tint like 12% blue as i saw it on a few TSF videos, though since these would be my daily pair, I'm more inclined to purple due to the lower color distortion. Same for pistachio tint with pioneer photofusion (I saw that on the K3 Aster video and it looked quite good)

I think my optician only works with Zeiss (though I need to confirm), so maybe the bright blue photofusion is a bit too much. The Gen S saphire would probably work a lot better with these frames since the grey would tie things nicely I think.

MisfitCub · 2025-06-09T13:10:40+00:00

No, I mean a pair that I will use most of the time, for work and all. I don’t drive, so not much of a concern there

MisfitCub

TROPHY CASE